init does not find library files.....
Thank for your kindful replying for our question about ramdisk.
Now we installed HardHat Linux CDK and found file system in /targer directory. we follwed all procedures and made ramdisk.gz
But, when we ran this ramdisk iamge, init didn't found libc.so.6 of course, we put this libc.so.6 file into our /lib directory in ramdisk.gz following is our result...
We need your comments, any comments will help us.. thanks...
----------- our experiment result ----------
RAM disk driver initialized: 16 RAM disks of 10240K size
loop: registered device at major 7
eth0: CPM ENET Version 0.2, 00:05:27:00:00:01
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 28k in
init: error in loading shared libraries: libc.so.6: cannot open shared object fi
le: No such file or directory <--- Here is our problem!!!
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 1 line · On Wed, Mar 07, 2001 at 08:50:44AM +0900, [email protected] wrote:
But, when we ran this ramdisk iamge, init didn't found libc.so.6
I'm willing to bet my house that it's the pesky missing symlink from /opt/hardhat/devkit/ppc/8xx/powerpc-hardhat-linux to / on the target again.
Check the entry "Kernel panic: No init found..." on startup in the HOWTO at:
file:/home/elph/greyham/HOWTO/PowerPC-Embedded-HOWTO-20.html#ss20.7
Regards,
Graham
--
Graham Stoney
Assistant Technology Manager
Canon Information Systems Research Australia
Ph: +61 2 9805 2909 Fax: +61 2 9805 2929
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 1 line · Graham Stoney
Check the entry "Kernel panic: No init found..." on startup in the HOWTO at:
Err, make that:
http://penguinppc.org/usr/embedded/howto/PowerPC-Embedded-HOWTO-20.html#ss20.7
:->
Sorry,
Graham
--
Graham Stoney
Assistant Technology Manager
Canon Information Systems Research Australia
Ph: +61 2 9805 2909 Fax: +61 2 9805 2929
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
you are probably missing an important link. It is in .../target/opt/hardhat...
Include that link in your ramdisk and it should work fine.
Quoted 14 lines · [email protected] wrote:
Thank for your kindful replying for our question about ramdisk.
Now we installed HardHat Linux CDK and found file system in /targer directory. we follwed all procedures and made ramdisk.gz
But, when we ran this ramdisk iamge, init didn't found libc.so.6 of course, we put this libc.so.6 file into our /lib directory in ramdisk.gz following is our result...
We need your comments, any comments will help us.. thanks...
----------- our experiment result ----------
Quoted 10 lines
RAM disk driver initialized: 16 RAM disks of 10240K size
loop: registered device at major 7
eth0: CPM ENET Version 0.2, 00:05:27:00:00:01
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 28k in
init: error in loading shared libraries: libc.so.6: cannot open shared object fi
le: No such file or directory <--- Here is our problem!!!
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/