Promisc routing
Quoted 11 lines
From: "Roy" <[email protected]>
I want to set interface to promisc mode and do all routing with iptables. Is it somehow possible? as I see now kernel do not pass everything to ipables.
Basicaly I want to ignore ethernet addess and use only ip for routing.
I suppose this may require writting special kernel driver or it is possible
in other way?
Probably you need only a kernel patched with ebtables/br-nf and use
iptables extensions ROUTE, TTL/ttl, TOS/tos, MARK/mark, multiport, mport, etc.
All the best,
-- Sumit
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Sumit Pandya
Quoted 8 lines
From: "Roy" <[email protected]>
I want to set interface to promisc mode and do all routing with iptables. Is it somehow possible? as I see now kernel do not pass everything to ipables.
Basicaly I want to ignore ethernet addess and use only ip for routing.
Quoted 7 lines
Quoted 3 lines
I suppose this may require writting special kernel driver or it is possible
in other way?Probably you need only a kernel patched with ebtables/br-nf and use
iptables extensions ROUTE, TTL/ttl, TOS/tos, MARK/mark, multiport, mport, etc.
See http://ebtables.sourceforge.net/examples.html#easy "Making a brouter" and "Using the redirect target".
cheers,
Bart
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thanks,
but I I already found iptables promic chain patch. Probably it will by a bit simpler to use, and will less space. ( need this for LinuxAP which ROM is only 1MB)
Probably I will install ebtables on my server.
By default linux aready have about as many limitations as windows.
----- Original Message -----
From: "Bart De Schuymer" <[email protected]>
To: "Sumit Pandya" <[email protected]>; <[email protected]>
Cc: <[email protected]>
Sent: Saturday, August 28, 2004 12:12 PM
Subject: Re: [LARTC] RE: Promisc routing
Quoted 27 lines · Sumit Pandya
Quoted 3 lines
Quoted 3 lines
From: '"'Roy'"' <[email protected]>
I want to set interface to promisc mode and do all routing
with iptables.
Quoted 1 line
Quoted 1 line
Is it somehow possible? as I see now kernel do not pass
everything to
Quoted 3 lines
Quoted 3 lines
ipables.
Basicaly I want to ignore ethernet addess and use only ip
for routing.
Quoted 2 lines
Quoted 2 lines
I suppose this may require writting special kernel driver
or it
Quoted 4 lines
Quoted 2 lines
is possible
in other way?Probably you need only a kernel patched with ebtables/br-nf
and use
Quoted 1 line
iptables extensions ROUTE, TTL/ttl, TOS/tos, MARK/mark,
multiport, mport,
Quoted 1 line
etc.
See http://ebtables.sourceforge.net/examples.html#easy '"'Making a brouter'"' and
'"'Using the redirect target'"'.
Quoted 7 lines
cheers,
Bart_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Still I don't understand what are you trying to do - promisc mode is only useful for bridging/sniffing - just enable ip_forward, and that's all...
Dmitry
Quoted 60 lines · Roy
Thanks,
but I I already found iptables promic chain patch. Probably it will by a bit simpler to use, and will less space. ( need this for LinuxAP which ROM is only 1MB)
Probably I will install ebtables on my server.
By default linux aready have about as many limitations as windows.
----- Original Message -----
From: "Bart De Schuymer" <[email protected]>
To: "Sumit Pandya" <[email protected]>; <[email protected]>
Cc: <[email protected]>
Sent: Saturday, August 28, 2004 12:12 PM
Subject: Re: [LARTC] RE: Promisc routingQuoted 41 lines · Sumit Pandya
Quoted 3 lines
Quoted 3 lines
From: '"'Roy'"' <[email protected]>
I want to set interface to promisc mode and do all routing
with iptables.
Quoted 1 line
Quoted 1 line
Is it somehow possible? as I see now kernel do not pass
everything to
Quoted 3 lines
Quoted 3 lines
ipables.
Basicaly I want to ignore ethernet addess and use only ip
for routing.
Quoted 1 line
Quoted 1 line
I suppose this may require writting special kernel driver
or it
Quoted 4 lines
Quoted 2 lines
is possible
in other way?Probably you need only a kernel patched with ebtables/br-nf
and use
Quoted 1 line
iptables extensions ROUTE, TTL/ttl, TOS/tos, MARK/mark,
multiport, mport,
Quoted 1 line
etc.
See http://ebtables.sourceforge.net/examples.html#easy '"'Making a brouter'"' and
'"'Using the redirect target'"'.cheers,
Bart
Quoted 7 lines
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I actualy want to make remote wlan sniffing-monitoring device I will use linuxAP and redirect everything it captures to the main server. also I can use this to use ap without even associating with it.
On ethernet it is not so much usefull, because of switches. I dont know it they allow to have same mac on more than one port
----- Original Message -----
From: "Dmitry Golubev" <[email protected]>
To: <[email protected]>
Sent: Monday, August 30, 2004 3:40 PM
Subject: Re: [LARTC] RE: Promisc routing
Quoted 84 lines
Still I don't understand what are you trying to do - promisc mode is only
useful for bridging/sniffing - just enableip_forward, and that's all...Dmitry
Quoted 4 lines · Roy
Thanks,
but I I already found iptables promic chain patch. Probably it will by a bit simpler to use, and will less
space.
Quoted 5 lines
( need this for LinuxAP which ROM is only 1MB)
Probably I will install ebtables on my server.
By default linux aready have about as many limitations as
windows.
Quoted 5 lines
----- Original Message -----
From: '"'Bart De Schuymer'"'Quoted 1 line
To: '"'Sumit Pandya'"' <[email protected]>;
Quoted 5 lines
Cc: <[email protected]>
Sent: Saturday, August 28, 2004 12:12 PM
Subject: Re: [LARTC] RE: Promisc routingQuoted 1 line
On Saturday 28 August 2004 09:16, Sumit Pandya
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
From: ''"''Roy''"''
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I want to set interface to promisc mode and do
all routing
Quoted 4 lines
Quoted 4 lines
with iptables.
Quoted 1 line
Quoted 1 line
Is it somehow possible? as I see now kernel do
not pass
Quoted 6 lines
Quoted 6 lines
everything to
Quoted 3 lines
Quoted 3 lines
ipables.
Basicaly I want to ignore ethernet addess and
use only ip
Quoted 4 lines
Quoted 4 lines
for routing.
Quoted 1 line
Quoted 1 line
I suppose this may require writting special
kernel driver
Quoted 7 lines
Quoted 7 lines
or it
Quoted 4 lines
Quoted 2 lines
is possible
in other way?Probably you need only a kernel patched with
ebtables/br-nf
Quoted 4 lines
Quoted 4 lines
and use
Quoted 1 line
iptables extensions ROUTE, TTL/ttl, TOS/tos,
MARK/mark,
Quoted 6 lines
Quoted 6 lines
multiport, mport,
Quoted 1 line
etc.
See http://ebtables.sourceforge.net/examples.html#easy ''"''Making
a
Quoted 10 lines
Quoted 9 lines
brouter''"'' and
''"''Using the redirect target''"''.cheers,
Bart_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/