Skip to contentSkip to conversation

Linux 2.6.3 / cdrdao 1.1.8 only recognizes devices on one IDE channel

DISCUSSION Justin Piszcz 1 participant 1 message Mar 7, 2004

lore
Share & tools
lore
#0 lore raw

The problem is cdrdao only see's the devices on the second IDE BUS (IDE1) and does not see anything on IDE0.

$ uname -r
2.6.3
$ cdrdao 2>&1 | grep -i version
Cdrdao version 1.1.8 - (C) Andreas Mueller <[email protected]>

ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA

hda=plextor 12/10/32a
hdc=plextor 12/10/32a
hdd=toshiba 16x dvdrom

hda: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive

ATAPI:0,0,0: PLEXTOR CD-R PX-W1210A Rev: 1.10

ATAPI:0,0,1:    Rev:
ATAPI:0,0,2:    Rev:
ATAPI:0,0,3:    Rev:
ATAPI:0,0,4:    Rev:
ATAPI:0,0,5:    Rev:
ATAPI:0,0,6:    Rev:
ATAPI:0,0,7:    Rev:
ATAPI:0,1,0: TOSHIBA DVD-ROM SD-M1712   Rev: 1004
ATAPI:0,1,1:    Rev:
ATAPI:0,1,2:    Rev:
ATAPI:0,1,3:    Rev:
ATAPI:0,1,4:    Rev:
ATAPI:0,1,5:    Rev:
ATAPI:0,1,6:    Rev:
ATAPI:0,1,7:    Rev:
ATAPI:0,2,0:    Rev:
ATAPI:0,2,1:    Rev:
ATAPI:0,2,2:    Rev:
ATAPI:0,2,3:    Rev:
ATAPI:0,2,4:    Rev:
ATAPI:0,2,5:    Rev:
ATAPI:0,2,6:    Rev:
ATAPI:0,2,7:    Rev:
ATAPI:0,3,0:    Rev:
ATAPI:0,3,1:    Rev:
ATAPI:0,3,2:    Rev:
ATAPI:0,3,3:    Rev:
ATAPI:0,3,4:    Rev:

... (all empty)
ATAPI:9,9,9: Rev:

Also, how does cdrecord work when not using ide-scsi?

$ cdrecord --scanbus
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling
Linux sg driver version: 3.5.30
Using libscg version 'schily-0.7'
scsibus0:
       0,0,0     0) *
       0,1,0     1) *
       0,2,0     2) 'IOMEGA  ' 'ZIP 100         ' 'J.03' Removable Disk
       0,3,0     3) *
       0,4,0     4) *
       0,5,0     5) *
       0,6,0     6) *
       0,7,0     7) *
$ cdrecord dev=/dev/hda
$ cdrecord dev=/dev/hda --scanbus
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling
scsidev: '/dev/hda'
devname: '/dev/hda'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
scsibus0:
       0,0,0     0) 'PLEXTOR ' 'CD-R   PX-W1210A' '1.10' Removable CD-ROM
       0,1,0     1) *
       0,2,0     2) *
       0,3,0     3) *
       0,4,0     4) *
       0,5,0     5) *
       0,6,0     6) *
       0,7,0     7) *
$

_________________________________________________________________
Get business advice and resources to improve your work life, from bCentral. http://special.msn.com/bcentral/loudclear.armx