Skip to contentSkip to conversation

ISAPNP and alsa 0.9.3, 0.9.3a Bug

DISCUSSION Botoaca Andrei 1 participant 1 message May 8, 2003

lore
Share & tools
lore
#0 lore raw

I have installed RH9. The kernel is with everything it needs installed. ISAPNP ... everything.
In the config , i get PNP in kernel=no, but i have pnp in kernel (I checked flags , and everything is fine, and I got the same thing in the configure of 0.9.2 too, but everything worked right).
I have a CMIPCI card (PCI) and an Yamaha Opl3-SaX (ISA). Until release 0.9.2 everything worked fine for both.
The PCI card, works OK, but since 0.9.3, and 0.9.3a the ISA card won't start. I compiled the drivers with , and without ISAPNP suport. If I do without, I get unresolved symbols; if I do with, then it says that there are not enough resources, or the device is busy.
I checked. Resource for the card is free (exept IRQ 11) because my Yamaha has IDE controller on board, and I don't really care , and even if i remove the device which is using irq 11 , still not working. Same error. Other drivers are not loaded (neither alsa, nor oss). And I removed all other components except my videocard. And I still get the same error. So I think there is a bug with that sound module, or if you have any ideea how to run configure so it works (because I saw many dummy files, that configure deletes, and if i don't put back the workqueue.h, no card works, unresolved symbol in workqueue ...).

Thanks a lot
Andrei Botoaca

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail

-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara The only event dedicated to issues related to Linux enterprise solutions www.enterpriselinuxforum.com