Skip to contentSkip to conversation

linux-firmware-add-intel-6e.patch

Buildroot Stephan Henningsen 2 participants 2 messages Dec 8, 2022 – Dec 11, 2022

lore
Share & tools
lore
#0 lore raw

Config.in: add option for installing firmware files for Intel 6/6E devices linux-firmware.mk: add target for installing firmware files for Intel 6/6E devices

Config.in 2022-12-08 21:45:49.730000447 +0100 renamed from Config.in 2022-12-08 21:35:15.051696882 +0100 +6 -0
diff -purN linux-firmware.orig/Config.in linux-firmware/Config.in
@@ -268,6 +268,12 @@ config BR2_PACKAGE_LINUX_FIRMWARE_IWLWIF
   Firmware files for the Intel Wifi 9xxx devices supported by
   the iwlwifi kernel driver.
 
+config BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6E
+ bool "Intel iwlwifi Wi-Fi 6/6E
+ help
+ Firmware files for the Intel Wi-Fi 6 and Wi-Fi 6E devices
+ supported by the iwlwifi kernel driver.
+

config BR2_PACKAGE_LINUX_FIRMWARE_LIBERTAS_SD8686_V8
bool "Libertas SD 8686 v8"
help

linux-firmware.mk 2022-12-08 21:45:09.536584391 +0100 renamed from linux-firmware.mk 2022-12-08 21:35:15.051696882 +0100 +0 -0
diff -purN linux-firmware.orig/linux-firmware.mk linux-firmware/linux-firmware.mk
@@ -514,6 +514,11 @@ LINUX_FIRMWARE_FILES += iwlwifi-9???-*.u

LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.iwlwifi_firmware endif

+ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6E),y) +LINUX_FIRMWARE_FILES += iwlwifi-so-a0-gf-a0*.{ucode,pnvm} +LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.iwlwifi_firmware +endif
+
ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_BROADCOM_TIGON3),y) LINUX_FIRMWARE_FILES += tigon/*
# No license file; the license is in the file WHENCE

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#1 lore raw

Hello Stephan,

Quoted 6 lines · On Thu, 08 Dec 2022 22:11:10 +0100 Stephan Henningsen <[email protected]>…

Config.in: add option for installing firmware files for Intel 6/6E devices
linux-firmware.mk: add target for installing firmware files for Intel 6/6E devices

Here again, your patch appears badly damaged on the mailing list, please use git send-email.

Nevertheless, I applied it manually, and did:

https://gitlab.com/buildroot.org/buildroot/-/commit/b55dfdb286ddb7fb4f35c20b731a4c93bd3ff201

It would be great if you could fix your patch submission tooling for the next contributions, in order to make them easier to review/apply.

Thanks a lot!

Thomas

Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot