Skip to contentSkip to conversation

Add argument filters to the seccomp sandbox

PATCH In review Namsun Ch'o 2 participants 3 messages Sep 25, 2015 – Oct 2, 2015

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 Add argument filters to the seccomp sandbox

Here's the v3 patch. I applied it and compiled QEMU, and it worked fine.

Changes so far:
v1
- Created argument filters for the madvise, shmget, and shmctl syscalls.
v1 -> v2
- Added 5 new madvise flags which were present in the source code but not in the strace which I generated.
- Added IP_CREAT|0600 to shmget, which Daniel Berrange pointed out was present in GTK2, which QEMU uses but does not call directly.
v2 -> v3
- Replaced include asm/mman-common.h with sys/mman.h which is more proper.
- Fixed a stupid typo where I had IP_CREAT instead of IPC_CREAT.
- Removed the comma on the last entry of the madvise_flags array.
- Removed one madvise flag (MADV_INVALID) which doesn't exist, apparently.

---

qemu-seccomp.c +55 -3
index f9de0d3..a353ef9 100644
@@ -14,6 +14,8 @@
  */
 #include <stdio.h>
 #include <seccomp.h>
+#include <linux/ipc.h>
+#include <sys/mman.h>
 #include "sysemu/seccomp.h"
 
 struct QemuSeccompSyscall {
@@ -105,7 +107,6 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(rt_sigreturn), 245 },
     { SCMP_SYS(sync), 245 },
     { SCMP_SYS(pread64), 245 },
-    { SCMP_SYS(madvise), 245 },
     { SCMP_SYS(set_robust_list), 245 },
     { SCMP_SYS(lseek), 245 },
     { SCMP_SYS(pselect6), 245 },
@@ -224,11 +225,9 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(arch_prctl), 240 },
     { SCMP_SYS(mkdir), 240 },
     { SCMP_SYS(fchmod), 240 },
-    { SCMP_SYS(shmget), 240 },
     { SCMP_SYS(shmat), 240 },
     { SCMP_SYS(shmdt), 240 },
     { SCMP_SYS(timerfd_create), 240 },
-    { SCMP_SYS(shmctl), 240 },
     { SCMP_SYS(mlockall), 240 },
     { SCMP_SYS(mlock), 240 },
     { SCMP_SYS(munlock), 240 },
@@ -264,6 +263,59 @@ int seccomp_start(void)
         }
     }
 
+    /* madvise */
+    static const int madvise_flags[] = {
+        MADV_DODUMP,
+        MADV_DONTDUMP,
+        MADV_UNMERGEABLE,
+        MADV_WILLNEED,
+        MADV_DONTFORK,
+        MADV_DONTNEED,
+        MADV_HUGEPAGE,
+        MADV_MERGEABLE
+    };
+    for (i = 0; i < ARRAY_SIZE(madvise_flags); i++) {
+        rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(madvise), 1,
+            SCMP_A2(SCMP_CMP_EQ, madvise_flags[i]));
+        if (rc < 0) {
+            goto seccomp_return;
+        }
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(madvise), 245);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
+    /* shmget */
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+        SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+        SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0777));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+        SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+        SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0600));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmget), 240);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
+    /* shmctl */
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmctl), 2,
+        SCMP_A1(SCMP_CMP_EQ, IPC_RMID),
+        SCMP_A2(SCMP_CMP_EQ, 0));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmctl), 240);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
     rc = seccomp_load(ctx);
 
   seccomp_return:
Acked-by on v3 1/1
#1 lore raw
Quoted 101 lines · Namsun Ch'o

Here's the v3 patch. I applied it and compiled QEMU, and it worked fine.

Changes so far:
v1
- Created argument filters for the madvise, shmget, and shmctl syscalls.
v1 -> v2
- Added 5 new madvise flags which were present in the source code but not in the strace which I generated.
- Added IP_CREAT|0600 to shmget, which Daniel Berrange pointed out was present in GTK2, which QEMU uses but does not call directly.
v2 -> v3
- Replaced include asm/mman-common.h with sys/mman.h which is more proper.
- Fixed a stupid typo where I had IP_CREAT instead of IPC_CREAT.
- Removed the comma on the last entry of the madvise_flags array.
- Removed one madvise flag (MADV_INVALID) which doesn't exist, apparently.

---

qemu-seccomp.c +48 -3
index f9de0d3..a353ef9 100644
@@ -14,6 +14,8 @@
  */
 #include <stdio.h>
 #include <seccomp.h>
+#include <linux/ipc.h>
+#include <sys/mman.h>
 #include "sysemu/seccomp.h"
 
 struct QemuSeccompSyscall {
@@ -105,7 +107,6 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(rt_sigreturn), 245 },
     { SCMP_SYS(sync), 245 },
     { SCMP_SYS(pread64), 245 },
-    { SCMP_SYS(madvise), 245 },
     { SCMP_SYS(set_robust_list), 245 },
     { SCMP_SYS(lseek), 245 },
     { SCMP_SYS(pselect6), 245 },
@@ -224,11 +225,9 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(arch_prctl), 240 },
     { SCMP_SYS(mkdir), 240 },
     { SCMP_SYS(fchmod), 240 },
-    { SCMP_SYS(shmget), 240 },
     { SCMP_SYS(shmat), 240 },
     { SCMP_SYS(shmdt), 240 },
     { SCMP_SYS(timerfd_create), 240 },
-    { SCMP_SYS(shmctl), 240 },
     { SCMP_SYS(mlockall), 240 },
     { SCMP_SYS(mlock), 240 },
     { SCMP_SYS(munlock), 240 },
@@ -264,6 +263,59 @@ int seccomp_start(void)
         }
     }
 
+    /* madvise */
+    static const int madvise_flags[] = {
+        MADV_DODUMP,
+        MADV_DONTDUMP,
+        MADV_UNMERGEABLE,
+        MADV_WILLNEED,
+        MADV_DONTFORK,
+        MADV_DONTNEED,
+        MADV_HUGEPAGE,
+        MADV_MERGEABLE
+    };
+    for (i = 0; i < ARRAY_SIZE(madvise_flags); i++) {
+        rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(madvise), 1,
+            SCMP_A2(SCMP_CMP_EQ, madvise_flags[i]));
+        if (rc < 0) {
+            goto seccomp_return;
+        }
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(madvise), 245);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
+    /* shmget */
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+        SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+        SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0777));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+        SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+        SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0600));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmget), 240);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
+    /* shmctl */
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmctl), 2,
+        SCMP_A1(SCMP_CMP_EQ, IPC_RMID),
+        SCMP_A2(SCMP_CMP_EQ, 0));
+    if (rc < 0) {

qemu-seccomp.c int seccomp_start(void) · line 321

Quoted 10 lines
qemu-seccomp.c +7 -0
+        goto seccomp_return;
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmctl), 240);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
     rc = seccomp_load(ctx);
 
   seccomp_return:

This looks good now.
Thanks for your contribution.

ps.: I'll create a pull request with all changes made so far on Friday.

Signature · 2 lines
Eduardo Otubo
ProfitBricks GmbH
#2 lore raw
Quoted 111 lines · Eduardo Otubo
Quoted 110 lines · Namsun Ch'o

Here's the v3 patch. I applied it and compiled QEMU, and it worked fine.

Changes so far:
v1
- Created argument filters for the madvise, shmget, and shmctl syscalls.
v1 -> v2
- Added 5 new madvise flags which were present in the source code but not in the strace which I generated.
- Added IP_CREAT|0600 to shmget, which Daniel Berrange pointed out was present in GTK2, which QEMU uses but does not call directly.
v2 -> v3
- Replaced include asm/mman-common.h with sys/mman.h which is more proper.
- Fixed a stupid typo where I had IP_CREAT instead of IPC_CREAT.
- Removed the comma on the last entry of the madvise_flags array.
- Removed one madvise flag (MADV_INVALID) which doesn't exist, apparently.

---

qemu-seccomp.c +55 -3
index f9de0d3..a353ef9 100644
@@ -14,6 +14,8 @@
  */
 #include <stdio.h>
 #include <seccomp.h>
+#include <linux/ipc.h>
+#include <sys/mman.h>
 #include "sysemu/seccomp.h"
 
 struct QemuSeccompSyscall {
@@ -105,7 +107,6 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(rt_sigreturn), 245 },
     { SCMP_SYS(sync), 245 },
     { SCMP_SYS(pread64), 245 },
-    { SCMP_SYS(madvise), 245 },
     { SCMP_SYS(set_robust_list), 245 },
     { SCMP_SYS(lseek), 245 },
     { SCMP_SYS(pselect6), 245 },
@@ -224,11 +225,9 @@ static const struct QemuSeccompSyscall seccomp_whitelist[] = {
     { SCMP_SYS(arch_prctl), 240 },
     { SCMP_SYS(mkdir), 240 },
     { SCMP_SYS(fchmod), 240 },
-    { SCMP_SYS(shmget), 240 },
     { SCMP_SYS(shmat), 240 },
     { SCMP_SYS(shmdt), 240 },
     { SCMP_SYS(timerfd_create), 240 },
-    { SCMP_SYS(shmctl), 240 },
     { SCMP_SYS(mlockall), 240 },
     { SCMP_SYS(mlock), 240 },
     { SCMP_SYS(munlock), 240 },
@@ -264,6 +263,59 @@ int seccomp_start(void)
         }
     }
 
+    /* madvise */
+    static const int madvise_flags[] = {
+        MADV_DODUMP,
+        MADV_DONTDUMP,
+        MADV_UNMERGEABLE,
+        MADV_WILLNEED,
+        MADV_DONTFORK,
+        MADV_DONTNEED,
+        MADV_HUGEPAGE,
+        MADV_MERGEABLE
+    };
+    for (i = 0; i < ARRAY_SIZE(madvise_flags); i++) {
+        rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(madvise), 1,
+            SCMP_A2(SCMP_CMP_EQ, madvise_flags[i]));
+        if (rc < 0) {
+            goto seccomp_return;
+        }
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(madvise), 245);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
+    /* shmget */
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+        SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+        SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0777));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmget), 2,
+        SCMP_A0(SCMP_CMP_EQ, IPC_PRIVATE),
+        SCMP_A2(SCMP_CMP_EQ, IPC_CREAT|0600));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmget), 240);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
+    /* shmctl */
+    rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(shmctl), 2,
+        SCMP_A1(SCMP_CMP_EQ, IPC_RMID),
+        SCMP_A2(SCMP_CMP_EQ, 0));
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+    rc = seccomp_syscall_priority(ctx, SCMP_SYS(shmctl), 240);
+    if (rc < 0) {
+        goto seccomp_return;
+    }
+
     rc = seccomp_load(ctx);
 
Quoted 9 lines

qemu-seccomp.c int seccomp_start(void) · line 321

Quoted 1 line
qemu-seccomp.c +0 -0
   seccomp_return:

This looks good now.
Thanks for your contribution.

ps.: I'll create a pull request with all changes made so far on Friday.

The pull request will be delayed a little bit due to some new patches incoming. Let's just set an agreement on how to approach regarding the "-runas and -chroot" patch and will prepare just a single batch for pull reuqest to Peter.

Regards,

Signature · 2 lines
Eduardo Otubo
ProfitBricks GmbH