HUGE contiguous mem space with 2.4
Hi...
I am facing an odd problem here. I have an application here that requires a HUGE physically contiguous memory area to be locked (yes, I have hardware DMA'ing in and out of that area, over the PCI bus). HUGE being like one Gig (could be more if needed...)
I am trying to use the mem=1024M option at boot time (yes, the box has 2 Gigs of RAM) and then ioremap() from within my module. There I have a couple of issues:
- if I use high_memory as is, I cannot remap any area
(high_memory=f800:0000 ???)
- if I use high_memory thru virt_to_phys, I can then remap...
up to 64 Megs (maybe a little more, but for sure less than 128 Megs) (virt_to_phys(high_mem)=3800:0000)
I tried with other values (like mem=250M 512M 1536M) and could NOT remap anything close to the whole amount of "reserved" memory (best case being with mem=256M I can remap 512M out of 1.75Gigs)
I guess I am missing a point somewhere.... or have totally been "ignoring" some doc somewhere (alessandro could be the man for this one thing *-) )
[system is a dual P3 with 2 gigs of RAM, a 2.4.3 kernel with SMP turned on... and the nice option for 4Gigs of RAM... would the 64Gig option help me??? just wondering there...]
Any pointer, advise, help, hint... laugh at the stupid thing I have forgotten is more than welcome..
tia
Chris.
Quoted 14 lines · Christophe Beaumont
Hi...
I am facing an odd problem here. I have an application here
that requires a HUGE physically contiguous memory area to be locked (yes, I have hardware DMA'ing in and out of that area, over the PCI bus). HUGE being like one Gig (could be
more if needed...)
I am trying to use the mem=1024M option at boot time (yes,
the box has 2 Gigs of RAM) and thenioremap()from within my module. There I have a couple of issues:
- if I usehigh_memoryas is, I cannot remap any area
(high_memory=f800:0000 ???)
- if I usehigh_memorythruvirt_to_phys, I can then remap...
up to 64 Megs (maybe a little more, but for sure less than
128 Megs) (virt_to_phys(high_mem)=3800:0000)
Quoted 4 lines
I tried with other values (like mem=250M 512M 1536M) and could NOT remap anything close to the whole amount of "reserved" memory (best case being with mem=256M I can remap 512M out of 1.75Gigs)
You are running out of virtual address space in the kernel. Either don't map the whole thing all the time (this is really the best solution since it works with stock kernels), or hack up your kernel to have more virtual address space reserved for the kernel. This will have the side effect of reducing the amount of memory an application can use at one time.
Another solution is to have the driver in user space, were you should be able to mmap a much larger amount of device memory. If your application requires no interrupt handling, and can always be run as root, you could probably get away with no kernel support at all. Just use /dev/mem to mmap the device and your dma memory.
-Jeff