Skip to contentSkip to conversation

using multile partitions on one NAND chip

DISCUSSION Stephan Linke 2 participants 2 messages Nov 24, 2004 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Hi,

anyone tried using multiple partitions on a NAND flash?
I can't find the protection mechanism that protects lets say an erase on one block against a read command on the other block. In my case I am using 2 YAFFS patitions and 1 partition that fakes a read-only NOR flash using the nand_read_ecc() function (mtd->read_ecc()). I'm not shure if there is an efficient protection for this. It looks like nand_chip->chip_lock should do this job but it only protects parts of the erase loop agains parts of the nand_chip->waitfunc() wait loop. It does not keep nand_chip->cmdfunc() from sending a command while an erase command is still active in the nand chip.

Thanks, Stephan

#1 lore raw
Quoted 1 line · Stephan Linke

Hi,

Please fix your mail client, to 80 characters per line. Read http://david.woodhou.se/email.html

Quoted 1 line

anyone tried using multiple partitions on a NAND flash?

Ever looked into the various drivers in drivers/mtd/nand ?

Quoted 3 lines

I can't find the protection mechanism that protects lets say an erase on one block against a read command on the other block.

nand_get_chip() contains the protection.

Quoted 2 lines

efficient protection for this. It looks like nand_chip->chip_lock should do this job but it only protects

chip_lock is only for SMP and the lock/unlock macros contain the preemption control if CONFIG_PREEMPT=y. The lock itself is a NOOP on UP systems

tglx