Skip to contentSkip to conversation

[2.6] CONFIG_HZ for x86

RFC PATCH Niklas Vainio 2 participants 2 messages Nov 6, 2003 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Mikael Pettersson:

Quoted 6 lines

This patch adds a CONFIG_HZ option to x86, allowing the kernel- internal HZ to be reduced from 1000 to 512 or 100. This solves lost timer interrupt problems on really old machines like my 486. According to Alan Cox, HZ==1000 is also harmful on some laptops (presumably due to long SMI windows), so this patch should be useful for those too.

I'm not sure if I had the same problem, but my system clock wasn't staying in time. This patch solved the problem. This is a Pentium III desktop machine so it looks like other machines are affected too.

- Nikke

#2 lore raw
Quoted 8 lines · Niklas Vainio

Mikael Pettersson:

Quoted 6 lines

This patch adds a CONFIG_HZ option to x86, allowing the kernel- internal HZ to be reduced from 1000 to 512 or 100. This solves lost timer interrupt problems on really old machines like my 486. According to Alan Cox, HZ==1000 is also harmful on some laptops (presumably due to long SMI windows), so this patch should be useful for those too.

Quoted 5 lines

I'm not sure if I had the same problem, but my system clock wasn't staying in time. This patch solved the problem. This is a Pentium III desktop machine so it looks like other machines are affected too.

- Nikke

Glad to hear it helped. Thanks for the feedback.

/Mikael