Linux 2.4 Scalability, Samba, and Netbench
Quoted 4 lines · Andrew Theurer
I do have kernprof ACG and lockmeter for a 4P run. We saw no significant problems with lockmeter.
csum_partial_copy_genericwas the highest % in profile, at 4.34%. I'll see if we can get some space on
http://lse.sourceforge.net to post the test data.
The Netfinity system that you are using has two different supported GigE adapters. I assume you are using one of these types - Netfinity Gigabit Ethernet Adapter (19K4401) and the Netfinity Gigabit Ethernet SX Server Adapter (06P3701); using the acenic.c and e1000.c drivers, respectively.
Quoted 1 line
From what I understand after initial perusal of the two drivers, the former
has receive checksumming support on the adapter itself while the latter, the one you are using, does not support hardware checksumming (at least, it is not enabled by the driver).
Are you able to re-run your tests with GigE adapters that support checksumming on the hardware instead of doing it in the kernel? If not, I will be running similar tests in a very similar configuration (with the 19K4401 adapters) in the near future and can share results if you'd like.
Bruce Allan/Beaverton/IBM
IBM Linux Technology Center - OS Gold
503-578-4187 T/L 775-4187
[email protected]
Quoted 7 lines · Bruce Allan
Quoted 4 lines · Andrew Theurer
I do have kernprof ACG and lockmeter for a 4P run. We saw no significant problems with lockmeter.
csum_partial_copy_genericwas the highest % in profile, at 4.34%. I'll see if we can get some space on
http://lse.sourceforge.net to post the test data.
Quoted 8 lines
The Netfinity system that you are using has two different supported GigE adapters. I assume you are using one of these types - Netfinity Gigabit Ethernet Adapter (19K4401) and the Netfinity Gigabit Ethernet SX Server Adapter (06P3701); using the
acenic.cande1000.cdrivers, respectively.Quoted 1 line
From what I understand after initial perusal of the two drivers, the former
has receive checksumming support on the adapter itself while the latter, the one you are using, does not support hardware checksumming (at least, it is not enabled by the driver).
Bruce,
According to Intel's driver for Pro/1000, it supports checksum on Rx via module option "XsunRX=1". I have not tried this yet because we are waiting on our Gbps switch hardware.
Quoted 4 lines
Are you able to re-run your tests with GigE adapters that support checksumming on the hardware instead of doing it in the kernel? If not, I will be running similar tests in a very similar configuration (with the 19K4401 adapters) in the near future and can share results if you'd like.
Yes, hopefully we will be running the new setup (64 clients, many Gbps adapters) in about 2-3 weeks. At that point I'd like to get some results for 8-way as well. It would definitely be a good idea to compare results.
Andrew Theurer