Skip to contentSkip to conversation

no DRQ after issuing WRITE

DISCUSSION Daniel Lux 1 participant 1 message Dec 15, 2003 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

Daniel Lux

author
#3 lore raw

Hi,

I had the same problem on a slow system with high load, I made a patch against this problem. Which kernel version are you using and would you be willing to try my patch?

Regards
Daniel Lux

Systems Developer
LIAB Electronics Aps Tel: +45 97370644
Støvring Vækstcenter, Østre Allé 6 Email: [email protected]
DK-9530 Støvring, Denmark

Quoted 124 lines · [email protected] wrote:

Well i only just started getting them and i started with 2.4.20 and upgraded to 2.4.21 about 6weeks or so ago (or when it came out)

Started gettig errors about 4-5days ago..

Ive seen alot of other ppl with the same error on early kernels..

Any idea what it is

Quoted 4 lines

I do not have time to pause and trace/fix the mess.
However if you both can kindly finger the last kernel when you did not have this error, it will help constrain the pain.

Quoted 101 lines

Cheers,

Andre Hedrick
LAD Storage Consulting Group

Quoted 93 lines · Robert L. Harris

No answer for you but I've gotten this message also and was hoping someone would know what/why...

Thus spake Steven Adams ([email protected]):

Quoted 29 lines

anyone?
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, November 05, 2003 2:05 PM
Subject: hda: no DRQ after issuing WRITE

Quoted 20 lines

Hey guys,

i keep getting things like this in my dmesg

============================================
hda: status timeout: status=0xd0 { Busy }

hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }

hda: no DRQ after issuing WRITE
ide0: reset: success
=============================================

From hdparm
============================================
/dev/hda:

Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4CBRJLA

Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }

Quoted 2 lines
Quoted 2 lines

RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16,

MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4

Quoted 7 lines
Quoted 7 lines

DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5
=================================================

Ive searched high and low to try find out what this means, all ive

found it people keep saying its all different kinds of things..

Quoted 8 lines
Quoted 8 lines

I was wondering if this means my hdd is drying or is ti a setting?

Thanks guys,
Steve

-
To unsubscribe from this list: send the line "unsubscribe

linux-kernel" in the body of a message to
[email protected]

Quoted 1 line
Quoted 1 line

More majordomo info at http://vger.kernel.org/majordomo-info.html

Please read the FAQ at http://www.tux.org/lkml/

Quoted 2 lines

-
To unsubscribe from this list: send the line "unsubscribe

linux-kernel" in the body of a message to [email protected]

Quoted 1 line

More majordomo info at http://vger.kernel.org/majordomo-info.html

Please read the FAQ at http://www.tux.org/lkml/

:wq!
---------------------------------------------------------------------------
Robert L. Harris | GPG Key ID: E344DA3B

                                        @ x-hkp://pgp.mit.edu

DISCLAIMER:
These are MY OPINIONS ALONE. I speak for no-one else.

Life is not a destination, it's a journey.
Microsoft produces 15 car pileups on the highway.
Don't stop traffic to stand and gawk at the tragedy.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/