Skip to contentSkip to conversation

Configurable addressing of GTP main table

PATCH Superseded [email protected] 2 participants 2 messages Jan 19, 2024

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Configurable addressing of GTP main table

Issue:
the usage of a gpt table with i.MX processor is not compatible by default. This is due to a memory conflict: the main partition table is placed into the same memory space used to flash the header of the U-Boot. This last can not be moved since the ROM code of the i.MX6 starts to read to that fixed address (0x400).
This problem can be solved using a feature of the GTP partition table for witch the main table can be moved to a desired memory area.
The WIC library present in poky manages the GTP table through some standard Linux commands (gdisk and sgdisk) which ones have already the opportunity to perform this task.
This patch introduces this feature with the addition of some wic's options, used also in wks file.

New partition placement behavior:
Since now all partitions are placed after the gpt table presents into the first 1KB of memory (including both the gpt header at the first byte of memory and the main partition table staring at 0x400).
Now the main gpt table can be placed in other address spaces and a partition can be placed also before the gpt table. Recap:
- by default, all partitions are placed sequentially, one after the other. The first partition implicitly starts after the GPT partition table.
- adding a flag to the item of a partition into the wks file, the partition can be placed, starting from a fixed memory offset (neglecting the memory space occupied by the GTP table).
Combining the moving of the main partition table and the absolute (not yet relative) positioning of a partition, now it is possible to place one or more partitions before the GPT table.

New flags:
- main-ptable-offset (size in KB): to add as property of the bootloader item. Specifies the main partition table location in KB.
- fixed-align (boolean): to add as property of a partition. Specifies that the partition must to placed with absolute offset, used in conjunction with --align property

Example:
setting used for a wic for an i.MX6 processor, where the main partition table is placed with the absolute offset of 4MB

bootloader --ptable gpt --main-ptable-offset 4096K
part / --source rawcopy --sourceparams="file=u-boot.imx" --ondisk mmcblk --align 1 --size 1M --no-table --fixed-align

Test environment:
This patch is a part of Edgehog OS (https://git.seco.com/edgehog) a custom Yocto distribution by SECO SpA (www.seco.com), used on multiple architectures (both ARM and x86).
This solution is widely used by all SECO customers who use hardware solution based on NXP i.MX6 processors.

---
scripts/lib/wic/ksparser.py              |   2 + scripts/lib/wic/partition.py             |   1 + scripts/lib/wic/plugins/imager/direct.py | 102 +++++++++++++++++++++-- scripts/wic                              |   2 +-

4 files changed, 98 insertions(+), 9 deletions(-)
scripts/lib/wic/ksparser.py +0 -0
index 0df9eb0d05..45db2eaa5d 100644
@@ -148,6 +148,7 @@ class KickStart():

part = subparsers.add_parser('part')
part.add_argument('mountpoint', nargs='?')
part.add_argument('--active', action='store_true')
+        part.add_argument('--fixed-align', action='store_true') part.add_argument('--align', type=int)
part.add_argument('--offset', type=sizetype("K", True)) part.add_argument('--exclude-path', nargs='+')
@@ -194,6 +195,7 @@ class KickStart():
default='msdos')
bootloader.add_argument('--timeout', type=int) bootloader.add_argument('--source')
+        bootloader.add_argument('--main-ptable-offset', type=sizetype("K"), default=0)

include = subparsers.add_parser('include')
include.add_argument('path', type=cannedpathtype)

scripts/lib/wic/partition.py +0 -0
index 5275da6ed3..1bd2b457cd 100644
@@ -26,6 +26,7 @@ class Partition():

self.args = args
self.active = args.active
self.align = args.align
+        self.fixed_align = args.fixed_align
self.disk = args.disk
self.device = None
self.extra_space = args.extra_space

scripts/lib/wic/plugins/imager/direct.py +0 -0
index 165fc2979f..efa4d7804e 100644
@@ -16,6 +16,7 @@ import random

import shutil
import tempfile
import uuid
+import operator

from time import strftime

@@ -66,6 +67,7 @@ class DirectPlugin(ImagerPlugin):
self.workdir = self.setup_workdir(options.workdir) self._image = None
self.ptable_format = self.ks.bootloader.ptable
+        self.main_ptable_offset = self.ks.bootloader.main_ptable_offset self.parts = self.ks.partitions

# as a convenience, set source to the boot partition source
@@ -77,6 +79,7 @@ class DirectPlugin(ImagerPlugin):

image_path = self._full_path(self.workdir, self.parts[0].disk, "direct") self._image = PartitionedImage(image_path, self.ptable_format,
+                                       self.main_ptable_offset, self.parts, self.native_sysroot,
options.extra_space)

@@ -294,15 +297,27 @@ GPT_OVERHEAD = 34
# Size of a sector in bytes
SECTOR_SIZE = 512

+class memoryRegion():
+    def __init__(self):
+        self.start_sector = 1
+        self.end_sector = 1
+        self.part_num = 0
+
+    def __init__(self, part_num, start_sec, end_sec):
+        self.part_num = part_num
+        self.start_sector = start_sec
+        self.end_sector = end_sec
+
class PartitionedImage():
"""
Partitioned image in a file.
"""

-    def __init__(self, path, ptable_format, partitions, native_sysroot=None, extra_space=0):
+    def __init__(self, path, ptable_format, main_ptable_offset, partitions, native_sysroot=None, extra_space=0):
self.path = path  # Path to the image file
self.numpart = 0  # Number of allocated partitions
self.realpart = 0 # Number of partitions in the partition table
+        self.fixedalign_part = 0 # Number of partitions with absolute alignment self.primary_part_num = 0  # Number of primary partitions (msdos)
self.extendedpart = 0      # Create extended partition before this logical partition (msdos) self.extended_size_sec = 0 # Size of exteded partition (msdos)
@@ -311,11 +326,13 @@ class PartitionedImage():
self.min_size = 0 # Minimum required disk size to fit

# all partitions (in bytes)
self.ptable_format = ptable_format  # Partition table format
+        self.main_ptable_offset = main_ptable_offset # for GPT table, offset
# Disk system identifier
self.identifier = random.SystemRandom().randint(1, 0xffffffff)

self.partitions = partitions
self.partimages = []
+        self.used_memory_region = []
# Size of a sector used in calculations self.sector_size = SECTOR_SIZE self.native_sysroot = native_sysroot
@@ -368,6 +385,30 @@ class PartitionedImage():
# Converting kB to sectors for parted part.size_sec = part.disk_size * 1024 // self.sector_size

+    def _add_busy_region(self, part_num, start_sec, end_sec):
+        self.used_memory_region.append(memoryRegion(part_num, start_sec, end_sec))
+        self.used_memory_region = sorted(self.used_memory_region, key=operator.attrgetter('start_sector')) +
+    def _print_busy_region_list(self):
+        list = "Busy memory region (in sector)\n"
+        list += "\tpart#\tstart\tEnd\n"
+        for num in range(len(self.used_memory_region)):
+            list +="\t%s\t%s\t%s\n" % (self.used_memory_region[num].part_num, \
+                self.used_memory_region[num].start_sector, self.used_memory_region[num].end_sector)
+        logger.debug(list)
+
+    def _check_memory_region(self, start_sec, end_sec ):
+        """ Check if the specified region is already flagges as used. Returns
+        zero if not used, 1 otherwise"""
+        for num in range(len(self.used_memory_region)):
+            region = self.used_memory_region[num]
+            if ( ( region.start_sector < start_sec and start_sec < region.end_sector) or \
+                    ( region.start_sector < end_sec and end_sec < region.end_sector) ):
+                return 1
+            if ( start_sec < region.start_sector and end_sec > region.end_sector ):
+                return 1
+        return 0
+
def layout_partitions(self):
""" Layout the partitions, meaning calculate the position of every
partition on the disk. The 'ptable_format' parameter defines the
@@ -379,6 +420,35 @@ class PartitionedImage():

# partitions not listed in the table are not included.
num_real_partitions = len([p for p in self.partitions if not p.no_table])

+        # The partitions flagged as fixed alignment partition are placed into image
+        # before the others. Instead, relative-aligned partitions are placed in a
+        # serialized fashion, with control of the intersection of memory areas.
+        # The base address of the relative-aligned partitions is, as before,
+        # the maximum address accupied by the partition table
+
+        # Flag as used the momoery required for partition table
+        self._add_busy_region(-1, 0, MBR_OVERHEAD)
+        if self.ptable_format == "gpt":
+            offset = self.main_ptable_offset * 1024 // self.sector_size
+            self._add_busy_region(-1, offset, offset + GPT_OVERHEAD)
+
+        # Search all partition with fixed position into the image
+        for num in range(len(self.partitions)):
+            part = self.partitions[num]
+            if not part.fixed_align:
+                continue
+            if not part.no_table:
+                raise WicError("A partition with fixed alignment must have no_table flag set") +
+            start_sector = (part.align * 1024 // self.sector_size)
+            end_sector = start_sector + part.size_sec - 1
+            if self._check_memory_region(start_sector, end_sector) == 1:
+                self._print_busy_region_list()
+                raise WicError("A partition wants to use an already used memory region (sectors %d - %d)" \
+                        % (start_sector, end_sector))
+            self._add_busy_region(num, start_sector, end_sector)
+            part.start = start_sector
+
# Go through partitions in the order they are added in .ks file
for num in range(len(self.partitions)):
part = self.partitions[num]
@@ -403,7 +473,7 @@ class PartitionedImage():
if self.ptable_format == "msdos":
overhead = MBR_OVERHEAD
elif self.ptable_format == "gpt":
-                    overhead = GPT_OVERHEAD
+                    overhead = (self.main_ptable_offset * 1024 // self.sector_size) + GPT_OVERHEAD

# Skip one sector required for the partitioning scheme overhead self.offset += overhead
@@ -418,7 +488,7 @@ class PartitionedImage():
self.offset += 2

align_sectors = 0
-            if part.align:
+            if not part.fixed_align and part.align:
# If not first partition and we do have alignment set we need

# to align the partition.
# FIXME: This leaves a empty spaces to the disk. To fill the
@@ -440,7 +510,7 @@ class PartitionedImage():
# increase the offset so we actually start the partition on right alignment
self.offset += align_sectors

-            if part.offset is not None:
+            if not part.fixed_align and part.offset is not None:
offset = part.offset // self.sector_size

if offset * self.sector_size != part.offset:
@@ -455,14 +525,20 @@ class PartitionedImage():

self.offset = offset

-            part.start = self.offset
-            self.offset += part.size_sec
-
if not part.no_table:
part.num = self.realpart
else:
part.num = 0

+            if not part.fixed_align:
+                part.start = self.offset
+                self.offset += part.size_sec
+                if self._check_memory_region(part.start, self.offset) == 1:
+                    self._print_busy_region_list()
+                    raise WicError("A partition wants to use an already used memory region (sectors %d - %d)" \
+                        % (part.start, self.offset))
+                self._add_busy_region(part.num, part.start, self.offset)
+
if self.ptable_format == "msdos" and not part.no_table:
if part.type == 'logical':
self.logical_part_cnt += 1
@@ -482,12 +558,14 @@ class PartitionedImage():
"sectors (%d bytes).", part.mountpoint, part.disk,
part.num, part.start, self.offset - 1, part.size_sec,
part.size_sec * self.sector_size)
+
+        self._print_busy_region_list()

# Once all the partitions have been layed out, we can calculate the

# minumim disk size
self.min_size = self.offset
if self.ptable_format == "gpt":
-            self.min_size += GPT_OVERHEAD
+            self.min_size += (self.main_ptable_offset * 1024 // self.sector_size) + GPT_OVERHEAD

self.min_size *= self.sector_size
self.min_size += self.extra_space
@@ -606,6 +684,14 @@ class PartitionedImage():
exec_native_cmd("sfdisk --part-type %s %s %s" % \
(self.path, part.num, part.system_id),
self.native_sysroot)
+
+        if self.ptable_format == "gpt" and self.main_ptable_offset > 0:
+            main_ptable_sectors = self.main_ptable_offset * 1024 // self.sector_size
+            logger.debug("Move the main GPT partition table forward by %s sector(s)", main_ptable_sectors)
+            cmd = "sgdisk -j %d %s" % (main_ptable_sectors, self.path)
+            #cmd = "(echo -e 'x'; echo -e 'j' ; echo -e '%d'; echo -e 'w'; echo -e 'Y') | gdisk %s" % (main_ptable_sectors, self.path)
+            exec_native_cmd(cmd, self.native_sysroot)
+

def cleanup(self):
pass

scripts/wic +0 -0
index 06e0b48db0..0c59a550ef 100755
@@ -59,7 +59,7 @@ from wic import help as hlp
 

def wic_logger():
-    """Create and convfigure wic logger."""
+    """Create and configure wic logger."""
logger = logging.getLogger('wic')
logger.setLevel(logging.INFO)

--
2.39.2

#1 lore raw
Quoted 109 lines · davide.cardillo via lists.openembedded.org

Issue:
the usage of a gpt table with i.MX processor is not compatible by default. This is due to a memory conflict: the main partition table is placed into the same memory space used to flash the header of the U-Boot. This last can not be moved since the ROM code of the i.MX6 starts to read to that fixed address (0x400).
This problem can be solved using a feature of the GTP partition table for witch the main table can be moved to a desired memory area. The WIC library present in poky manages the GTP table through some standard Linux commands (gdisk and sgdisk) which ones have already the opportunity to perform this task.
This patch introduces this feature with the addition of some wic's options,
used also in wks file.

New partition placement behavior:
Since now all partitions are placed after the gpt table presents into the first 1KB of memory (including both the gpt header at the first byte of memory and the main partition table staring at 0x400).
Now the main gpt table can be placed in other address spaces and a partition
can be placed also before the gpt table. Recap:
- by default, all partitions are placed sequentially, one after the other. The first partition implicitly starts after the GPT partition table.
- adding a flag to the item of a partition into the wks file, the partition
can be placed, starting from a fixed memory offset (neglecting the memory space occupied by the GTP table).
Combining the moving of the main partition table and the absolute (not yet relative) positioning of a partition, now it is possible to place one or more
partitions before the GPT table.

New flags:
- main-ptable-offset (size in KB): to add as property of the bootloader item.
Specifies the main partition table location in KB.
- fixed-align (boolean): to add as property of a partition. Specifies that the
partition must to placed with absolute offset, used in conjunction with --align
property

Example:
setting used for a wic for an i.MX6 processor, where the main partition table is
placed with the absolute offset of 4MB

bootloader --ptable gpt --main-ptable-offset 4096K
part / --source rawcopy --sourceparams="file=u-boot.imx" --ondisk mmcblk --align 1 --size 1M --no-table --fixed-align

Test environment:
This patch is a part of Edgehog OS (https://git.seco.com/edgehog) a custom Yocto distribution by SECO SpA (www.seco.com), used on multiple architectures (both ARM and x86).
This solution is widely used by all SECO customers who use hardware solution based on NXP i.MX6 processors.

---

scripts/lib/wic/ksparser.py              |   2 +
scripts/lib/wic/partition.py             |   1 +
scripts/lib/wic/plugins/imager/direct.py | 102 +++++++++++++++++++++--
scripts/wic                              |   2 +-
4 files changed, 98 insertions(+), 9 deletions(-)
scripts/lib/wic/ksparser.py +2 -0
index 0df9eb0d05..45db2eaa5d 100644
@@ -148,6 +148,7 @@ class KickStart():
        part = subparsers.add_parser('part')
        part.add_argument('mountpoint', nargs='?')
        part.add_argument('--active', action='store_true')
+        part.add_argument('--fixed-align', action='store_true')
        part.add_argument('--align', type=int)
        part.add_argument('--offset', type=sizetype("K", True))
        part.add_argument('--exclude-path', nargs='+')
@@ -194,6 +195,7 @@ class KickStart():
                                default='msdos')
        bootloader.add_argument('--timeout', type=int)
        bootloader.add_argument('--source')
+        bootloader.add_argument('--main-ptable-offset',
 type=sizetype("K"), default=0)
 
        include = subparsers.add_parser('include')

include.add_argument('path', type=cannedpathtype)

scripts/lib/wic/partition.py +1 -0
index 5275da6ed3..1bd2b457cd 100644
@@ -26,6 +26,7 @@ class Partition():
        self.args = args
        self.active = args.active
        self.align = args.align
+        self.fixed_align = args.fixed_align
        self.disk = args.disk
        self.device = None
        self.extra_space = args.extra_space
scripts/lib/wic/plugins/imager/direct.py +0 -0
index 165fc2979f..efa4d7804e 100644
@@ -16,6 +16,7 @@ import random
Quoted 5 lines

import shutil
import tempfile
import uuid
+import operator

Same problem as before :(

Looking at the headers of your mail, it looks like you are using
https://lists.openembedded.org/g/openembedded-core to copy/paste your patch. That won't work.

Try to follow the steps documented in :
https://docs.yoctoproject.org/dev/contributor-guide/submit-changes.html#using-git-to-send-patches

Regards,

Quoted 272 lines

from time import strftime

scripts/lib/wic/plugins/imager/direct.py +2 -0
@@ -66,6 +67,7 @@ class DirectPlugin(ImagerPlugin):
        self.workdir = self.setup_workdir(options.workdir)
        self._image = None
        self.ptable_format = self.ks.bootloader.ptable
+        self.main_ptable_offset = self.ks.bootloader.main_ptable_offset
        self.parts = self.ks.partitions
 
        # as a convenience, set source to the boot partition source
@@ -77,6 +79,7 @@ class DirectPlugin(ImagerPlugin):
 
        image_path = self._full_path(self.workdir, self.parts[0].disk,
 "direct")
        self._image = PartitionedImage(image_path, self.ptable_format,
+                                       self.main_ptable_offset,
                                       self.parts, self.native_sysroot,
                                       options.extra_space)
@@ -294,15 +297,27 @@ GPT_OVERHEAD = 34
 # Size of a sector in bytes

SECTOR_SIZE = 512

scripts/lib/wic/plugins/imager/direct.py +11 -0
+class memoryRegion():
+    def __init__(self):
+        self.start_sector = 1
+        self.end_sector = 1
+        self.part_num = 0
+
+    def __init__(self, part_num, start_sec, end_sec):
+        self.part_num = part_num
+        self.start_sector = start_sec
+        self.end_sector = end_sec
+

class PartitionedImage():

    """
    Partitioned image in a file.
    """

- def __init__(self, path, ptable_format, partitions,
native_sysroot=None, extra_space=0):
+ def __init__(self, path, ptable_format, main_ptable_offset,
partitions, native_sysroot=None, extra_space=0):
self.path = path # Path to the image file self.numpart = 0 # Number of allocated partitions self.realpart = 0 # Number of partitions in the partition table
+ self.fixedalign_part = 0 # Number of partitions with absolute
alignment
self.primary_part_num = 0 # Number of primary partitions (msdos)
self.extendedpart = 0 # Create extended partition before this
logical partition (msdos)
self.extended_size_sec = 0 # Size of exteded partition (msdos)

scripts/lib/wic/plugins/imager/direct.py +1 -0
@@ -311,11 +326,13 @@ class PartitionedImage():
        self.min_size = 0 # Minimum required disk size to fit
                          # all partitions (in bytes)
        self.ptable_format = ptable_format  # Partition table format
+        self.main_ptable_offset = main_ptable_offset # for GPT table,

offset
# Disk system identifier
self.identifier = random.SystemRandom().randint(1, 0xffffffff)

self.partitions = partitions
self.partimages = []

scripts/lib/wic/plugins/imager/direct.py +11 -0
+        self.used_memory_region = []
        # Size of a sector used in calculations
        self.sector_size = SECTOR_SIZE
        self.native_sysroot = native_sysroot
@@ -368,6 +385,30 @@ class PartitionedImage():
            # Converting kB to sectors for parted
            part.size_sec = part.disk_size * 1024 // self.sector_size
 
+    def _add_busy_region(self, part_num, start_sec, end_sec):
+        self.used_memory_region.append(memoryRegion(part_num, start_sec,
 end_sec))
+        self.used_memory_region = sorted(self.used_memory_region,
 key=operator.attrgetter('start_sector'))
+
+    def _print_busy_region_list(self):
+        list = "Busy memory region (in sector)\n"
+        list += "\tpart#\tstart\tEnd\n"
+        for num in range(len(self.used_memory_region)):
+            list +="\t%s\t%s\t%s\n" %
 (self.used_memory_region[num].part_num, \
+                self.used_memory_region[num].start_sector,

self.used_memory_region[num].end_sector)

scripts/lib/wic/plugins/imager/direct.py +4 -0
+        logger.debug(list)
+
+    def _check_memory_region(self, start_sec, end_sec ):
+        """ Check if the specified region is already flagges as used.

Returns

scripts/lib/wic/plugins/imager/direct.py +4 -0
+        zero if not used, 1 otherwise"""
+        for num in range(len(self.used_memory_region)):
+            region = self.used_memory_region[num]
+            if ( ( region.start_sector < start_sec and start_sec <

region.end_sector) or \
+ ( region.start_sector < end_sec and end_sec <
region.end_sector) ):

scripts/lib/wic/plugins/imager/direct.py +2 -0
+                return 1
+            if ( start_sec < region.start_sector and end_sec >

region.end_sector ):

scripts/lib/wic/plugins/imager/direct.py +4 -0
+                return 1
+        return 0
+
    def layout_partitions(self):
        """ Layout the partitions, meaning calculate the position of every
        partition on the disk. The 'ptable_format' parameter defines the
@@ -379,6 +420,35 @@ class PartitionedImage():
        # partitions not listed in the table are not included.
        num_real_partitions = len([p for p in self.partitions if not
 p.no_table])
 
+        # The partitions flagged as fixed alignment partition are placed

into image
+ # before the others. Instead, relative-aligned partitions are
placed in a
+ # serialized fashion, with control of the intersection of memory
areas.
+ # The base address of the relative-aligned partitions is, as
before,

scripts/lib/wic/plugins/imager/direct.py +15 -0
+        # the maximum address accupied by the partition table
+
+        # Flag as used the momoery required for partition table
+        self._add_busy_region(-1, 0, MBR_OVERHEAD)
+        if self.ptable_format == "gpt":
+            offset = self.main_ptable_offset * 1024 // self.sector_size
+            self._add_busy_region(-1, offset, offset + GPT_OVERHEAD)
+
+        # Search all partition with fixed position into the image
+        for num in range(len(self.partitions)):
+            part = self.partitions[num]
+            if not part.fixed_align:
+                continue
+            if not part.no_table:
+                raise WicError("A partition with fixed alignment must

have no_table flag set")

scripts/lib/wic/plugins/imager/direct.py +6 -0
+
+            start_sector = (part.align * 1024 // self.sector_size)
+            end_sector = start_sector + part.size_sec - 1
+            if self._check_memory_region(start_sector, end_sector) == 1:
+                self._print_busy_region_list()
+                raise WicError("A partition wants to use an already used

memory region (sectors %d - %d)" \

scripts/lib/wic/plugins/imager/direct.py +5 -1
+                        % (start_sector, end_sector))
+            self._add_busy_region(num, start_sector, end_sector)
+            part.start = start_sector
+
        # Go through partitions in the order they are added in .ks file
        for num in range(len(self.partitions)):
            part = self.partitions[num]
@@ -403,7 +473,7 @@ class PartitionedImage():
                if self.ptable_format == "msdos":
                    overhead = MBR_OVERHEAD
                elif self.ptable_format == "gpt":
-                    overhead = GPT_OVERHEAD
+                    overhead = (self.main_ptable_offset * 1024 //

self.sector_size) + GPT_OVERHEAD

# Skip one sector required for the partitioning scheme
overhead

                self.offset += overhead
scripts/lib/wic/plugins/imager/direct.py +1 -1
@@ -418,7 +488,7 @@ class PartitionedImage():
                    self.offset += 2
 
            align_sectors = 0
-            if part.align:
+            if not part.fixed_align and part.align:
                # If not first partition and we do have alignment set we

need

                # to align the partition.
                # FIXME: This leaves a empty spaces to the disk. To fill
the
scripts/lib/wic/plugins/imager/direct.py +0 -0
@@ -440,7 +510,7 @@ class PartitionedImage():
                    # increase the offset so we actually start the

partition on right alignment

                    self.offset += align_sectors
scripts/lib/wic/plugins/imager/direct.py +5 -4
-            if part.offset is not None:
+            if not part.fixed_align and part.offset is not None:
                offset = part.offset // self.sector_size
 
                if offset * self.sector_size != part.offset:
@@ -455,14 +525,20 @@ class PartitionedImage():
 
                self.offset = offset
 
-            part.start = self.offset
-            self.offset += part.size_sec
-
            if not part.no_table:
                part.num = self.realpart
            else:
                part.num = 0
 
+            if not part.fixed_align:
+                part.start = self.offset
+                self.offset += part.size_sec
+                if self._check_memory_region(part.start, self.offset) ==

1:

scripts/lib/wic/plugins/imager/direct.py +2 -0
+                    self._print_busy_region_list()
+                    raise WicError("A partition wants to use an already

used memory region (sectors %d - %d)" \

scripts/lib/wic/plugins/imager/direct.py +5 -0
+                        % (part.start, self.offset))
+                self._add_busy_region(part.num, part.start, self.offset)
+
            if self.ptable_format == "msdos" and not part.no_table:
                if part.type == 'logical':
                    self.logical_part_cnt += 1
@@ -482,12 +558,14 @@ class PartitionedImage():
                         "sectors (%d bytes).", part.mountpoint,
 part.disk,
                         part.num, part.start, self.offset - 1,
 part.size_sec,
                         part.size_sec * self.sector_size)
+
+        self._print_busy_region_list()
 
        # Once all the partitions have been layed out, we can calculate

the

        # minumim disk size
        self.min_size = self.offset
        if self.ptable_format == "gpt":
scripts/lib/wic/plugins/imager/direct.py +1 -1
-            self.min_size += GPT_OVERHEAD
+            self.min_size += (self.main_ptable_offset * 1024 //

self.sector_size) + GPT_OVERHEAD

self.min_size *= self.sector_size
self.min_size += self.extra_space

scripts/lib/wic/plugins/imager/direct.py +3 -0
@@ -606,6 +684,14 @@ class PartitionedImage():
                exec_native_cmd("sfdisk --part-type %s %s %s" % \
                                (self.path, part.num, part.system_id),
                                self.native_sysroot)
+
+        if self.ptable_format == "gpt" and self.main_ptable_offset > 0:
+            main_ptable_sectors = self.main_ptable_offset * 1024 //

self.sector_size
+ logger.debug("Move the main GPT partition table forward by %s
sector(s)", main_ptable_sectors)

scripts/lib/wic/plugins/imager/direct.py +2 -0
+            cmd = "sgdisk -j %d %s" % (main_ptable_sectors, self.path)
+            #cmd = "(echo -e 'x'; echo -e 'j' ; echo -e '%d'; echo -e

'w'; echo -e 'Y') | gdisk %s" % (main_ptable_sectors, self.path)

scripts/lib/wic/plugins/imager/direct.py +2 -0
+            exec_native_cmd(cmd, self.native_sysroot)
+
 
    def cleanup(self):
        pass
scripts/wic +0 -0
index 06e0b48db0..0c59a550ef 100755
@@ -59,7 +59,7 @@ from wic import help as hlp
 
 

def wic_logger():

scripts/wic +1 -2
-    """Create and convfigure wic logger."""
+    """Create and configure wic logger."""
    logger = logging.getLogger('wic')
    logger.setLevel(logging.INFO)
 
--

2.39.2

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#194032):
https://lists.openembedded.org/g/openembedded-core/message/194032
Mute This Topic: https://lists.openembedded.org/mt/103828012/4316185
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Quoted 1 line

--

Yoann Congal
Smile ECS - Tech expert