Support for powermac G5?
Can anybody say if sound on the powermac G5 is supported ? I have no idea which chipset it is either.
I've tried with kernels 2.6.5, 2.6.6 and 2.6.7
modprobe snd-powermac
FATAL: Error inserting snd_powermac (/lib/modules/2.6.7-r0/kernel/sound/ppc/snd-powermac.ko): No such device
and in /var/log/messages I get
"Jun 20 18:19:09 linux ALSA sound/ppc/pmac.c:1095: pmac: can't request resource 0!
Jun 20 18:19:09 linux no PMac soundchip found"
Can anybody give me some pointers into what the problem could be. Btw I have snd-powermac as a module and not compliled into any of the above kernels. But I have also tried it compliled into the kernel but with same results.
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
Dont't know anything about soundchips on G5, but on my new Powerbook I had to comment out the chipset identification in pmac.c and set the chip to snapper.
Reiner
Quoted 19 lines · [email protected] wrote:
Can anybody say if sound on the powermac G5 is supported ? I have no idea which chipset it is either.
I've tried with kernels 2.6.5, 2.6.6 and 2.6.7
modprobe snd-powermac
FATAL: Error insertingsnd_powermac(/lib/modules/2.6.7-r0/kernel/sound/ppc/snd-powermac.ko): No such deviceand in
/var/log/messagesI get"Jun 20 18:19:09 linux ALSA
sound/ppc/pmac.c:1095: pmac: can't request resource 0!Jun 20 18:19:09 linux no PMac soundchip found"Can anybody give me some pointers into what the problem could be. Btw I have snd-powermac as a module and not compliled into any of the above kernels. But I have also tried it compliled into the kernel but with same results.
Quoted 9 lines
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
Quoted 5 lines · Reiner Klenk
Dont't know anything about soundchips on G5, but on my new Powerbook I had to comment out the chipset identification in
pmac.cand set the chip to snapper.Reiner
Reiner: I presume your commnets are for the function (pmac.c):
"static int __init snd_pmac_detect(pmac_t *chip)"
where you commented out the if-statement (line 927 for me) :
if (device_is_compatible(sound, "snapper")) {
chip->model = PMAC_SNAPPER;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->num_freqs = 2;
chip->freq_table = tumbler_freqs;
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}so that it was snapper. A question though. How did you know that you had to set the chipset to snapper ? Was this information available somewhere in /proc ? For example, (wild guess) is the information in /proc/device-tree/ht@0,f2000000/pci@3/mac-io@7/i2s@10000/i2s-a@0/sound/compatible important ? In my case it gives AOAK2.
Also did you get the same error as me i.e
"ALSA sound/ppc/pmac.c:1095: pmac: can't request resource 0!" in /var/log/messages?
Thanks,
Jaspal.
Quoted 35 lines
Quoted 21 lines · [email protected] wrote:
Can anybody say if sound on the powermac G5 is supported ? I have no idea which chipset it is either.
I've tried with kernels 2.6.5, 2.6.6 and 2.6.7
modprobe snd-powermac
FATAL: Error insertingsnd_powermac(/lib/modules/2.6.7-r0/kernel/sound/ppc/snd-powermac.ko): No such deviceand in
/var/log/messagesI get"Jun 20 18:19:09 linux ALSA
sound/ppc/pmac.c:1095: pmac: can't request resource 0!Jun 20 18:19:09 linux no PMac soundchip found"Can anybody give me some pointers into what the problem could be. Btw I have snd-powermac as a module and not compliled into any of the above kernels. But I have also tried it compliled into the kernel but with same results.
Quoted 9 lines
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 10 lines
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
_______________________________________________
Alsa-devel mailing list
[email protected]
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 12 lines · [email protected] wrote:
Reiner: I presume your commnets are for the function (
pmac.c): "static int__initsnd_pmac_detect(pmac_t *chip)"where you commented out the if-statement (line 927 for me) :
if (device_is_compatible(sound, "snapper")) { chip->model = PMAC_SNAPPER; // chip->can_byte_swap = 0; /* FIXME: check this */ chip->num_freqs = 2; chip->freq_table = tumbler_freqs; chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */ }
Quoted 1 line
so that it was snapper.
Yes, that's what I did.
A question though. How did you know that you had
Quoted 2 lines
to set the chipset to snapper ? Was this information available somewhere in /proc ? For example, (wild guess) is the information in
/proc/device-tree/ht@0,f2000000/pci@3/mac-io@7/i2s@10000/i2s-a@0/sound/compatibleimportant ? In my case it gives AOAK2.
It says here: AOAKeylargo
I don't really know much about these things. I read about this work-around on the debian-ppc mailing list (This list has been very helpful in resolving a couple of issues with the new powerbooks).
Yesterday I updated my kernel to 2.6.7-bk9 and I didn't have to modify pmac.c any more. So for powerbooks this seems to be fixed.
Quoted 3 lines
Also did you get the same error as me i.e "ALSA
sound/ppc/pmac.c:1095: pmac: can't request resource 0!" in/var/log/messages?
No, I haven't seen that.
Reagrds,
Reiner
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com