audgiy two zs and emu10k1
hi gals, hi dudes. i thought this would be the right place to post this question. i bought an audigy two zs card, and got it to work with emu10k1. i've got a problem though. analogic output works fine, whereas digital output don't seem to work at all. no sound comes out. also, i've plugged in an optical cable and looked into the other side of it, and no red beam is comin' out.
i thought a developer who worked on the driver might be able to answer this question. is this a missing feature? need i trigger any special parameter?
two final notes. i've tried togglin' 'audigy analog/digital output jack'. when it's on analogic output works, when it's off it don't. digital output never works. also, i ran alsaconf and it prints 'no supported pnp or pci card found.', although my card is detected at boot as an audigy two and, as i typed before, analogic output works fine.
how can i enable digital output? maybe i'm usin' the wrong cable?help! : )
thankyou! : )
ciao! : )
edoardo
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
Quoted 18 lines · edoardo
hi gals, hi dudes. i thought this would be the right place to post this question. i bought an audigy two zs card, and got it to work with emu10k1. i've got a problem though. analogic output works fine, whereas digital output don't seem to work at all. no sound comes out. also, i've plugged in an optical cable and looked into the other side of it, and no red beam is comin' out.
i thought a developer who worked on the driver might be able to answer this question. is this a missing feature? need i trigger any special parameter?
two final notes. i've tried togglin' 'audigy analog/digital output jack'. when it's on analogic output works, when it's off it don't. digital output never works. also, i ran alsaconf and it prints 'no supported pnp or pci card found.', although my card is detected at boot as an audigy two and, as i typed before, analogic output works fine.
Quoted 8 lines
how can i enable digital output? maybe i'm usin' the wrong cable?help! : )
thankyou! : )
ciao! : )
edoardo
Post the output of:
lspci -vn | grep -1 0401
also the output of:
cat /proc/asound/cards
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
Quoted 3 lines · James Courtier-Dutton
Post the output of:
lspci -vn | grep -1 0401
the output is:
0000:00:06.0 Class 0401: 10de:006a (rev a1)
Subsystem: 1043:8095
--
0000:01:06.0 Class 0401: 1102:0004 (rev 04)
Subsystem: 1102:2002
Quoted 2 lines
also the output of:
cat/proc/asound/cards
the output is:
0 [Audigy2 ]: Audigy2 - Sound Blaster Audigy2
Sound Blaster Audigy2 (rev.4, serial:0x20021102) at
0xc000, irq 16
for peter: i confirm, it's player.
help? please, thankyou : )
ciao! : )
edoardo
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20