Bug: 2.6.24-smp: Eeek! page_mapcount(page) went negative! (-1)
Hi,
I have recently had a couple of seemingly hard hangs requiring reboot by reset button. I could not ping the box.
Until now, the console log (log level 7) was empty/normal...
This morning I finally seem to have found out what the failures are... an rmap bug for real mem > 4G...
First, some info on my system...
Kernel 2.6.24 SMP on AMD Athlon 64 X2 4000
top - 09:44:55 up 24 min, 42 users, load average: 0.05, 0.11, 0.16
Tasks: 206 total, 3 running, 203 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 1.3%sy, 0.0%ni, 96.2%id, 0.0%wa, 0.0%hi, 2.2%si, 0.0%st
Mem: 8248340k total, 3769556k used, 4478784k free, 82732k buffers Swap: 7828572k total, 0k used, 7828572k free, 3254360k cached
*** top used was about 6.2G w 0k Swap usage.
I was working on local X (there were also 2 remote xdm KDE sessions as well) when my openoffice edit acted strangely. A couple minutes later, X completely locked up.
A remote ssh session allowed me to do a normal shutdown.
On reboot, I found the bug log in the console log, included below
Before digging into this myself (don't really have enought time), I thought I'd submit it here...
my .config is tar gz'd as an attachment
Any input would be appreciated...
Thnx much,
johnh
.
===========================================================
John Heil
South Coast Software
Custom firmware, device drivers and board bring up services
Ph: 1-714-774-6952
Fx: 1-714-774-7053
www.sc-software.com
email: [email protected]
===========================================================
Feb 6 09:09:47 sc-software kernel: Eeek! page_mapcount(page) went negative! (-1) Feb 6 09:09:47 sc-software kernel: page pfn = 12b1b1 Feb 6 09:09:47 sc-software kernel: page->flags = 80080014 Feb 6 09:09:47 sc-software kernel: page->count = 0 Feb 6 09:09:47 sc-software kernel: page->mapping = 00000000 Feb 6 09:09:47 sc-software kernel: vma->vm_ops = 0x0 Feb 6 09:09:47 sc-software kernel: ------------[ cut here ]------------ Feb 6 09:09:47 sc-software kernel: kernel BUG at mm/rmap.c:631! Feb 6 09:09:47 sc-software kernel: invalid opcode: 0000 [#2] PREEMPT SMP Feb 6 09:09:47 sc-software kernel: Modules linked in: shpchp pci_hotplug ohci1394 ieee1394 Feb 6 09:09:47 sc-software kernel: Feb 6 09:09:47 sc-software kernel: Pid: 3710, comm: X Tainted: G D (2.6.24 #1) Feb 6 09:09:47 sc-software kernel: EIP: 0060:[<c016fc36>] EFLAGS: 00213246 CPU: 0 Feb 6 09:09:47 sc-software kernel: EIP is at page_remove_rmap+0xe6/0x110 Feb 6 09:09:47 sc-software kernel: EAX: 00000000 EBX: c516deb8 ECX: c01280a8 EDX: 00000001 Feb 6 09:09:47 sc-software kernel: ESI: f7120ee4 EDI: 11605000 EBP: f1b31d70 ESP: f1b31d60 Feb 6 09:09:47 sc-software kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 6 09:09:47 sc-software kernel: Process X (pid: 3710, ti=f1b30000 task=f0586aa0 task.ti=f1b30000) Feb 6 09:09:47 sc-software kernel: Stack: c074dda2 00000000 c516deb8 f0662028 f1b31db4 c01683ce 2b1b1065 00000001 Feb 6 09:09:47 sc-software kernel: 00000000 00000000 2b1b1065 00000001 c1a9657c fffffffb ffffffff f71cb300 Feb 6 09:09:47 sc-software kernel: f7120ee4 c8e36180 1a004000 11800000 f07fe460 f1b31df8 c016858d 11600000 Feb 6 09:09:47 sc-software kernel: Call Trace: Feb 6 09:09:47 sc-software kernel: [<c0103e5a>] show_trace_log_lvl+0x1a/0x30 Feb 6 09:09:47 sc-software kernel: [<c0103f2a>] show_stack_log_lvl+0x9a/0xc0 Feb 6 09:09:47 sc-software kernel: [<c01040d7>] show_registers+0xc7/0x250 Feb 6 09:09:47 sc-software kernel: [<c010441f>] die+0x11f/0x220 Feb 6 09:09:47 sc-software kernel: [<c01045b1>] do_trap+0x91/0xd0 Feb 6 09:09:47 sc-software kernel: [<c0104859>] do_invalid_op+0x89/0xa0 Feb 6 09:09:47 sc-software kernel: [<c0657c22>] error_code+0x72/0x78 Feb 6 09:09:47 sc-software kernel: [<c01683ce>] zap_pte_range+0x22e/0x320 Feb 6 09:09:47 sc-software kernel: [<c016858d>] unmap_page_range+0xcd/0x180 Feb 6 09:09:47 sc-software kernel: [<c016870d>] unmap_vmas+0xcd/0x210 Feb 6 09:09:47 sc-software kernel: [<c016dd36>] exit_mmap+0x76/0x120 Feb 6 09:09:47 sc-software kernel: [<c0124c39>] mmput+0x39/0xa0 Feb 6 09:09:47 sc-software kernel: [<c0129b3e>] exit_mm+0x8e/0xf0 Feb 6 09:09:47 sc-software kernel: [<c012a393>] do_exit+0x153/0x350 Feb 6 09:09:47 sc-software kernel: [<c012a5e9>] do_group_exit+0x29/0x70 Feb 6 09:09:47 sc-software kernel: [<c0134452>] get_signal_to_deliver+0x242/0x2e0 Feb 6 09:09:47 sc-software kernel: [<c0102e4c>] do_signal+0x5c/0x170 Feb 6 09:09:47 sc-software kernel: [<c0102f9c>] do_notify_resume+0x3c/0x40 Feb 6 09:09:47 sc-software kernel: [<c01031b5>] work_notifysig+0x13/0x1a Feb 6 09:09:47 sc-software kernel: ======================= Feb 6 09:09:47 sc-software kernel: Code: bb dd 74 c0 e8 dc 2f fe ff 8b 46 44 85 c0 75 1f 8b 46 4c 85 c0 74 14 8b 40 10 85 c0 74 0d 8b 50 2c b8 14 ec 74 c0 e8 ba 2f fe ff <0f> 0b eb fe 8b 50 0c b8 38 ec 74 c0 e8 a9 2f fe ff 8b 46 44 8b Feb 6 09:09:47 sc-software kernel: EIP: [<c016fc36>] page_remove_rmap+0xe6/0x110 SS:ESP 0068:f1b31d60 Feb 6 09:09:47 sc-software kernel: ---[ end trace 791c1b0a2eb87d50 ]--- Feb 6 09:09:47 sc-software kernel: Fixing recursive fault but reboot is needed! Feb 6 09:09:47 sc-software kernel: BUG: scheduling while atomic: X/3710/0x00000003 Feb 6 09:09:47 sc-software kernel: INFO: lockdep is turned off. Feb 6 09:09:47 sc-software kernel: Pid: 3710, comm: X Tainted: G D 2.6.24 #1 Feb 6 09:09:47 sc-software kernel: [<c0103e5a>] show_trace_log_lvl+0x1a/0x30 Feb 6 09:09:47 sc-software kernel: [<c0103e82>] show_trace+0x12/0x20 Feb 6 09:09:47 sc-software kernel: [<c0103ffd>] dump_stack+0x6d/0x80 Feb 6 09:09:47 sc-software kernel: [<c0120f56>] __schedule_bug+0x66/0x70 Feb 6 09:09:47 sc-software kernel: [<c0655655>] __sched_text_start+0x295/0x490 Feb 6 09:09:47 sc-software kernel: [<c012a4ab>] do_exit+0x26b/0x350 Feb 6 09:09:47 sc-software kernel: [<c0104513>] die+0x213/0x220 Feb 6 09:09:47 sc-software kernel: [<c01045b1>] do_trap+0x91/0xd0 Feb 6 09:09:47 sc-software kernel: [<c0104859>] do_invalid_op+0x89/0xa0 Feb 6 09:09:47 sc-software kernel: [<c0657c22>] error_code+0x72/0x78 Feb 6 09:09:47 sc-software kernel: [<c01683ce>] zap_pte_range+0x22e/0x320 Feb 6 09:09:47 sc-software kernel: [<c016858d>] unmap_page_range+0xcd/0x180 Feb 6 09:09:47 sc-software kernel: [<c016870d>] unmap_vmas+0xcd/0x210 Feb 6 09:09:47 sc-software kernel: [<c016dd36>] exit_mmap+0x76/0x120 Feb 6 09:09:47 sc-software kernel: [<c0124c39>] mmput+0x39/0xa0 Feb 6 09:09:47 sc-software kernel: [<c0129b3e>] exit_mm+0x8e/0xf0 Feb 6 09:09:47 sc-software kernel: [<c012a393>] do_exit+0x153/0x350 Feb 6 09:09:47 sc-software kernel: [<c012a5e9>] do_group_exit+0x29/0x70 Feb 6 09:09:47 sc-software kernel: [<c0134452>] get_signal_to_deliver+0x242/0x2e0 Feb 6 09:09:47 sc-software kernel: [<c0102e4c>] do_signal+0x5c/0x170 Feb 6 09:09:47 sc-software kernel: [<c0102f9c>] do_notify_resume+0x3c/0x40 Feb 6 09:09:47 sc-software kernel: [<c01031b5>] work_notifysig+0x13/0x1a Feb 6 09:09:47 sc-software kernel: =======================
Quoted 3 lines · On Wed, 6 Feb 2008, [email protected] wrote:
Before digging into this myself (don't really have enought time), I thought I'd submit it here...
Thanks for the report.
Quoted 1 line
Feb 6 09:09:47 sc-software kernel: Eeek! page_mapcount(page) went negative!
These very often turn out the be due to bad RAM or some such:
worth running memtest86+ overnight when you can, though its success wouldn't be conclusive.
Quoted 4 lines
(-1)
Feb 6 09:09:47 sc-software kernel: page pfn = 12b1b1 Feb 6 09:09:47 sc-software kernel: page->flags = 80080014 Feb 6 09:09:47 sc-software kernel: page->count = 0
That's a free page which shouldn't have appeared in the pagetable. It could be that there's a bit error somewhere in that pfn of 12b1b1.
Quoted 9 lines
Feb 6 09:09:47 sc-software kernel: page->mapping = 00000000 Feb 6 09:09:47 sc-software kernel: vma->vm_ops = 0x0 Feb 6 09:09:47 sc-software kernel: ------------[ cut here ]------------ Feb 6 09:09:47 sc-software kernel: kernel BUG at mm/rmap.c:631! Feb 6 09:09:47 sc-software kernel: invalid opcode: 0000 [#2] PREEMPT SMP Feb 6 09:09:47 sc-software kernel: Modules linked in: shpchp pci_hotplug ohci1394 ieee1394 Feb 6 09:09:47 sc-software kernel: Feb 6 09:09:47 sc-software kernel: Pid: 3710, comm: X Tainted: G D
But that [#2] and that D taint both say there was already a problem before this: anything showing in the log for that?
Hugh
Quoted 37 lines · Hugh Dickins
Date: Wed, 6 Feb 2008 19:55:36 +0000 (GMT)
From: Hugh Dickins <[email protected]>
To: John Heil <[email protected]>
Cc: [email protected]
Subject: Re: Bug: 2.6.24-smp: Eeek!page_mapcount(page)went negative! (-1)Quoted 3 lines · On Wed, 6 Feb 2008, [email protected] wrote:
Before digging into this myself (don't really have enought time), I thought I'd submit it here...
Thanks for the report.
Quoted 1 line
Feb 6 09:09:47 sc-software kernel: Eeek! page_mapcount(page) went negative!These very often turn out the be due to bad RAM or some such:
worth running memtest86+ overnight when you can, though its success wouldn't be conclusive.Quoted 4 lines
(-1)
Feb 6 09:09:47 sc-software kernel: page pfn = 12b1b1 Feb 6 09:09:47 sc-software kernel: page->flags = 80080014 Feb 6 09:09:47 sc-software kernel: page->count = 0That's a free page which shouldn't have appeared in the pagetable. It could be that there's a bit error somewhere in that pfn of 12b1b1.
Quoted 9 lines
Feb 6 09:09:47 sc-software kernel: page->mapping = 00000000 Feb 6 09:09:47 sc-software kernel: vma->vm_ops = 0x0 Feb 6 09:09:47 sc-software kernel: ------------[ cut here ]------------ Feb 6 09:09:47 sc-software kernel: kernel BUG at mm/rmap.c:631! Feb 6 09:09:47 sc-software kernel: invalid opcode: 0000 [#2] PREEMPT SMP Feb 6 09:09:47 sc-software kernel: Modules linked in: shpchp pci_hotplug ohci1394 ieee1394 Feb 6 09:09:47 sc-software kernel: Feb 6 09:09:47 sc-software kernel: Pid: 3710, comm: X Tainted: G D
Quoted 7 lines
But that [#2] and that D taint both say there was already a problem before this: anything showing in the log for that?
Hugh
From reboot after last hang on 02/03/08, I found this...
Feb 5 23:26:26 sc-software kernel: ------------[ cut here ]------------ Feb 5 23:26:26 sc-software kernel: kernel BUG at mm/slab.c:591! Feb 5 23:26:26 sc-software kernel: invalid opcode: 0000 [#1] PREEMPT SMP Feb 5 23:26:26 sc-software kernel: Modules linked in: shpchp pci_hotplug ohci1394 ieee1394 Feb 5 23:26:26 sc-software kernel: Feb 5 23:26:26 sc-software kernel: Pid: 6040, comm: modprobe Not tainted (2.6.24 #1) Feb 5 23:26:26 sc-software kernel: EIP: 0060:[<c017960f>] EFLAGS: 00010046 CPU: 1 Feb 5 23:26:26 sc-software kernel: EIP is at kfree+0x8f/0xa0 Feb 5 23:26:26 sc-software kernel: EAX: 40000000 EBX: f5915380 ECX: c1bb4498 EDX: c1bb4498 Feb 5 23:26:26 sc-software kernel: ESI: eff354a0 EDI: f5815280 EBP: f0067e78 ESP: f0067e68 Feb 5 23:26:26 sc-software kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 5 23:26:26 sc-software kernel: Process modprobe (pid: 6040, ti=f0066000 task=f00b5550 task.ti=f0066000) Feb 5 23:26:26 sc-software kernel: Stack: 00000282 f5915380 eff354a0 b7fb87b0 f0067f1c c01ac9ac 00000003 00001812 Feb 5 23:26:26 sc-software kernel: f0067e98 0805ba64 00000418 0805ba64 f0067eb4 0805ba64 00001812 00000000 Feb 5 23:26:26 sc-software kernel: f5815280 00000001 00000000 0805be7c 0805ba64 0805aa64 08048000 00000000 Feb 5 23:26:26 sc-software kernel: Call Trace: Feb 5 23:26:26 sc-software kernel: [<c0103e5a>] show_trace_log_lvl+0x1a/0x30 Feb 5 23:26:26 sc-software kernel: [<c0103f2a>] show_stack_log_lvl+0x9a/0xc0 Feb 5 23:26:26 sc-software kernel: [<c01040d7>] show_registers+0xc7/0x250 Feb 5 23:26:26 sc-software kernel: [<c010441f>] die+0x11f/0x220 Feb 5 23:26:26 sc-software kernel: [<c01045b1>] do_trap+0x91/0xd0 Feb 5 23:26:26 sc-software kernel: [<c0104859>] do_invalid_op+0x89/0xa0 Feb 5 23:26:26 sc-software kernel: [<c0657c22>] error_code+0x72/0x78 Feb 5 23:26:26 sc-software kernel: [<c01ac9ac>] load_elf_binary+0x8cc/0xcf0 Feb 5 23:26:26 sc-software kernel: [<c0181864>] search_binary_handler+0xc4/0x250 Feb 5 23:26:26 sc-software kernel: [<c0181b35>] do_execve+0x145/0x190 Feb 5 23:26:26 sc-software kernel: [<c0101c82>] sys_execve+0x32/0xa0 Feb 5 23:26:26 sc-software kernel: [<c0103102>] syscall_call+0x7/0xb Feb 5 23:26:26 sc-software kernel: ======================= Feb 5 23:26:26 sc-software kernel: Code: 47 1d 00 8b 1c 86 8b 03 3b 43 04 73 11 89 7c 83 30 40 89 03 ff 75 f0 9d 58 5b 5e 5f 5d c3 89 f0 89 da e8 65 fc ff ff 8b 03 eb e2 <0f> 0b eb fe 8b 51 0c eb b7 8b 4a 0c eb a2 8d 76 00 55 89 e5 5d Feb 5 23:26:26 sc-software kernel: EIP: [<c017960f>] kfree+0x8f/0xa0 SS:ESP 0068:f0067e68 Feb 5 23:26:26 sc-software kernel: ---[ end trace 791c1b0a2eb87d50 ]---
Quoted 6 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
.
===========================================================
John Heil
South Coast Software
Custom firmware, device drivers and board bring up services
Ph: 1-714-774-6952
Fx: 1-714-774-7053
www.sc-software.com
email: [email protected]
===========================================================
Hi,
Quoted 22 lines · On Feb 6, 2008 10:21 PM, <[email protected]> wrote:
From reboot after last hang on 02/03/08, I found this...
Feb 5 23:26:26 sc-software kernel: ------------[ cut here ]------------ Feb 5 23:26:26 sc-software kernel: kernel BUG at mm/slab.c:591! Feb 5 23:26:26 sc-software kernel: invalid opcode: 0000 [#1] PREEMPT SMP Feb 5 23:26:26 sc-software kernel: Modules linked in: shpchp pci_hotplug ohci1394 ieee1394 Feb 5 23:26:26 sc-software kernel: Feb 5 23:26:26 sc-software kernel: Pid: 6040, comm: modprobe Not tainted (2.6.24 #1) Feb 5 23:26:26 sc-software kernel: EIP: 0060:[<c017960f>] EFLAGS: 00010046 CPU: 1 Feb 5 23:26:26 sc-software kernel: EIP is at kfree+0x8f/0xa0 Feb 5 23:26:26 sc-software kernel: EAX: 40000000 EBX: f5915380 ECX: c1bb4498 EDX: c1bb4498 Feb 5 23:26:26 sc-software kernel: ESI: eff354a0 EDI: f5815280 EBP: f0067e78 ESP: f0067e68 Feb 5 23:26:26 sc-software kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 5 23:26:26 sc-software kernel: Process modprobe (pid: 6040, ti=f0066000 task=f00b5550 task.ti=f0066000) Feb 5 23:26:26 sc-software kernel: Stack: 00000282 f5915380 eff354a0 b7fb87b0 f0067f1c c01ac9ac 00000003 00001812 Feb 5 23:26:26 sc-software kernel: f0067e98 0805ba64 00000418 0805ba64 f0067eb4 0805ba64 00001812 00000000 Feb 5 23:26:26 sc-software kernel: f5815280 00000001 00000000 0805be7c 0805ba64 0805aa64 08048000 00000000 Feb 5 23:26:26 sc-software kernel: Call Trace: Feb 5 23:26:26 sc-software kernel: [<c0103e5a>] show_trace_log_lvl+0x1a/0x30 Feb 5 23:26:26 sc-software kernel: [<c0103f2a>] show_stack_log_lvl+0x9a/0xc0 Feb 5 23:26:26 sc-software kernel: [<c01040d7>] show_registers+0xc7/0x250 Feb 5 23:26:26 sc-software kernel: [<c010441f>] die+0x11f/0x220
Quoted 8 lines
Feb 5 23:26:26 sc-software kernel: [<c01045b1>] do_trap+0x91/0xd0 Feb 5 23:26:26 sc-software kernel: [<c0104859>] do_invalid_op+0x89/0xa0 Feb 5 23:26:26 sc-software kernel: [<c0657c22>] error_code+0x72/0x78 Feb 5 23:26:26 sc-software kernel: [<c01ac9ac>] load_elf_binary+0x8cc/0xcf0 Feb 5 23:26:26 sc-software kernel: [<c0181864>] search_binary_handler+0xc4/0x250 Feb 5 23:26:26 sc-software kernel: [<c0181b35>] do_execve+0x145/0x190 Feb 5 23:26:26 sc-software kernel: [<c0101c82>] sys_execve+0x32/0xa0 Feb 5 23:26:26 sc-software kernel: [<c0103102>] syscall_call+0x7/0xb
This means we pass a non-slab pointer from load_elf_binary() to kfree() which doesn't seem likely to be a software bug reading the code. As Hugh suggested, please run memtest86+.
Quoted 40 lines · Pekka Enberg
Date: Wed, 6 Feb 2008 22:33:33 +0200
From: Pekka Enberg <[email protected]>
To: [email protected]
Cc: Hugh Dickins <[email protected]>, [email protected]
Subject: Re: Bug: 2.6.24-smp: Eeek!page_mapcount(page)went negative! (-1)Hi,
Quoted 22 lines · On Feb 6, 2008 10:21 PM, <[email protected]> wrote:
From reboot after last hang on 02/03/08, I found this...
Feb 5 23:26:26 sc-software kernel: ------------[ cut here ]------------ Feb 5 23:26:26 sc-software kernel: kernel BUG at mm/slab.c:591! Feb 5 23:26:26 sc-software kernel: invalid opcode: 0000 [#1] PREEMPT SMP Feb 5 23:26:26 sc-software kernel: Modules linked in: shpchp pci_hotplug ohci1394 ieee1394 Feb 5 23:26:26 sc-software kernel: Feb 5 23:26:26 sc-software kernel: Pid: 6040, comm: modprobe Not tainted (2.6.24 #1) Feb 5 23:26:26 sc-software kernel: EIP: 0060:[<c017960f>] EFLAGS: 00010046 CPU: 1 Feb 5 23:26:26 sc-software kernel: EIP is at kfree+0x8f/0xa0 Feb 5 23:26:26 sc-software kernel: EAX: 40000000 EBX: f5915380 ECX: c1bb4498 EDX: c1bb4498 Feb 5 23:26:26 sc-software kernel: ESI: eff354a0 EDI: f5815280 EBP: f0067e78 ESP: f0067e68 Feb 5 23:26:26 sc-software kernel: DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Feb 5 23:26:26 sc-software kernel: Process modprobe (pid: 6040, ti=f0066000 task=f00b5550 task.ti=f0066000) Feb 5 23:26:26 sc-software kernel: Stack: 00000282 f5915380 eff354a0 b7fb87b0 f0067f1c c01ac9ac 00000003 00001812 Feb 5 23:26:26 sc-software kernel: f0067e98 0805ba64 00000418 0805ba64 f0067eb4 0805ba64 00001812 00000000 Feb 5 23:26:26 sc-software kernel: f5815280 00000001 00000000 0805be7c 0805ba64 0805aa64 08048000 00000000 Feb 5 23:26:26 sc-software kernel: Call Trace: Feb 5 23:26:26 sc-software kernel: [<c0103e5a>] show_trace_log_lvl+0x1a/0x30 Feb 5 23:26:26 sc-software kernel: [<c0103f2a>] show_stack_log_lvl+0x9a/0xc0 Feb 5 23:26:26 sc-software kernel: [<c01040d7>] show_registers+0xc7/0x250 Feb 5 23:26:26 sc-software kernel: [<c010441f>] die+0x11f/0x220Quoted 8 lines
Feb 5 23:26:26 sc-software kernel: [<c01045b1>] do_trap+0x91/0xd0 Feb 5 23:26:26 sc-software kernel: [<c0104859>] do_invalid_op+0x89/0xa0 Feb 5 23:26:26 sc-software kernel: [<c0657c22>] error_code+0x72/0x78 Feb 5 23:26:26 sc-software kernel: [<c01ac9ac>] load_elf_binary+0x8cc/0xcf0 Feb 5 23:26:26 sc-software kernel: [<c0181864>] search_binary_handler+0xc4/0x250 Feb 5 23:26:26 sc-software kernel: [<c0181b35>] do_execve+0x145/0x190 Feb 5 23:26:26 sc-software kernel: [<c0101c82>] sys_execve+0x32/0xa0 Feb 5 23:26:26 sc-software kernel: [<c0103102>] syscall_call+0x7/0xb
Quoted 4 lines
This means we pass a non-slab pointer from
load_elf_binary()tokfree()which doesn't seem likely to be a software bug reading the code. As Hugh suggested, please run memtest86+.
Will do!... Thnx
j
.
===========================================================
John Heil
South Coast Software
Custom firmware, device drivers and board bring up services
Ph: 1-714-774-6952
Fx: 1-714-774-7053
www.sc-software.com
email: [email protected]
===========================================================