Conntrack Entries
Hi all,
I have written a netbios conntrack module for port 139. However when I tested it, it shows several entries because the source port on my side keeps changing.....e.g. 32900, then 32901, 32902.... in this case, there will be 3 lines as if there are 3 different connections are going on. Is this the correct expected behaviour or should they just go into 1 line?
What does the "use" field mean?
Ricky
_________________________________________________________________
Get 10mb of inbox space with MSN Hotmail Extra Storage http://join.msn.com/?pgmarket=en-sg
Quoted 7 lines · Ricky Foo
Hi all,
I have written a netbios conntrack module for port 139. However when I tested it, it shows several entries because the source port on my side keeps changing.....e.g. 32900, then 32901, 32902.... in this case, there will be 3 lines as if there are 3 different connections are going on. Is this the correct expected behaviour or should they just go into 1 line?
I have no idea about the netbios protocol, so I don't know what the expected behaviour is. Is it really only one connection? Then you should probably make the 2nd an 3rd connection be siblings (ip_conntrack_expect_related()) of the master connection.
Quoted 1 line
What does the "use" field mean?
It's an internal reference counter indicating how many other objects in the kernel are still referencing this conntrack.
Quoted 1 line
Ricky
Signature · 5 lines
- Harald Welte <[email protected]> http://www.netfilter.org/ ============================================================================ "Fragmentation is like classful addressing -- an interesting early architectural error that shows how much experimentation was going on while IP was being designed." -- Paul Vixie