Skip to contentSkip to conversation

HDD/IDE Interface using IDE_8xx_Direct

U-Boot-Users prabhu 1 participant 1 message Jun 9, 2006

lore
Share & tools
lore

prabhu

author
#0 lore raw

Dear sir,

We are interfacing MPC8xx processor with IDE/HDD by using Memory controller.In U-boot we configured CONFIG_IDE_8xx_DIRECT(PIO 4). The Logic implemented is interfaced with the User Programmable Machine B (UPMB) of MPC?s memory Controller unit.

MPC860/866 at 80MHz/100/130Mhz.
We are able to detect the HDD at the U-boot prompt(IDE status = OK and status register value is 0x50).
But when we run it from kernel with rfs mounted on HDD it shows the following error.

I've captured the log of IDE with debug enabled.
Please do have a look at it & Kindly let me know where we went wrong.

U-Boot 1.1.3 (May 29 2006 - 15:37:12)

CPU: unknown MPC86x (0x08010004) at 80 MHzz at 16 kB I-Cache 8 kB D-Cache
FEC present
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
clock 80000000Hz != 617900000Hz
Board: Integrated Communications Manager - Beta with MPC860P UPMB Enabled for IDE

I2C:   ready
DRAM:  (32 MB SDRAM) 32 MB
Top of RAM usable for U-Boot at: 02000000
Reserving 374k for U-Boot at: 01fa2000
Reserving 400k for malloc() at: 01f3e000

Reserving 60 Bytes for Board Info at: 01f3dfc4 Reserving 48 Bytes for Global Data at: 01f3df94 Stack Pointer at: 01f3df78
New Stack Pointer is: 01f3df78
Now running in RAM - U-Boot at: 01fa2000 FLASHz flash_protect ON: from 0xFF800000 to 0xFF828FFF protect on 0
protect on 1
protect on 2
protect on 3
flash_protect ON: from 0xFF840000 to 0xFF843FFF protect on 4
AMD-LV160-B : 8 MB

In:    serial
Out:   serial
Err:   serial

U-Boot relocated to 01fa2000
Net: @@FEC ETHERN
?
IDE: Bus 0: ide_outb (dev= 0, port= 0x1c, val= 0xe0) : @ 0xfeff001c
ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x80 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x80 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x90 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x90 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x50
OK
Device 0z ide_outb (dev= 0, port= 0x1c, val= 0xe0) : @ 0xfeff001c
ide_outb (dev= 0, port= 0x1e, val= 0xec) : @ 0xfeff001e ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x58
in input swap data base for read is feff0010
Model: ST340015A Firm: 3.01 Ser#: 5LAC48ZY
Type: Hard Disk
Capacity: 38166.6 MB = 37.2 GB (78165360 x 512)
ide_read dev 0 start 0, blocks 1 buffer at 1F3DCF8 ide_outb (dev= 0, port= 0x1c, val= 0xe0) : @ 0xfeff001? ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x50 ide_outb (dev= 0, port= 0x1e, val= 0xe5) : @ 0xfeff001e ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x50 ide_inb (dev= 0, port= 0x14) : @ 0xfeff0014 -> 0xff Powersaving FF
ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x50 ide_outb (dev= 0, port= 0x14, val= 0x01) : @ 0xfeff0014 ide_outb (dev= 0, port= 0x16, val= 0x00) : @ 0xfeff0016 ide_outb (dev= 0, port= 0x18, val= 0x00) : @ 0xfeff0018 ide_outb (dev= 0, port= 0x1a, val= 0x00) : @ 0xfeff001a ide_outb (dev= 0, port= 0x1c, val= 0xe0) : @ 0xfeff001c ide_outb (dev= 0, port= 0x1e, val= 0x20) : @ 0xfeff001e ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0xd0 ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0x58
in input data base for read is feff0010
ide_inb (dev= 0, port= 0x1e) : @ 0xfeff001e -> 0?50
LCD: 4 Line Display

### main_loop entered: bootdelay=1

### main_loop: bootcmd="bootm 0xff900000"
Hit ?ny key to stop autoboot: 1  0 ## ?ooting image at ff900000 ...

   Image Name:   Lin Kernel
   Created:      2006-05-29   5:20:27 UTC
   Image Type:   PowerPC Linux Kernel Im?ge (gzip compr?sse?)
   ?ata Size:    640339 Bytes = 625.3 kB

Load Ad?ress: 00000000
Entry ?oint: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK## Current stack ends at 0x01F3DBD8 =>
set upper limit to 0x00800000
## cmdline at 0x007FFF00 ... 0x007FFF10

bd address  = 0x01F3DFC4
memstart    = 0x00000000
memsize     = 0x02000000
flashstart  = 0xFF800000
flashsize   = 0x00800000
flashoffset = 0x00029000
sramstart   = 0x00000000
sramsize    = 0x00000000
immr_base   = 0xFF000000
bootflags   = 0x00000001
intfreq     =     80 MHz
busfreq     =     40 MHz
ethaddr     = 00:A2:63:4C:5D:15
IP addr     = 192.168.1.1
baudrate    =  38400 bpsNo initrd

## Transferring control to Linux (at address 00000000) ...
Linux version 2.4.18_mvl30-fads ((gcc version 3.2.1 20020930 (MontaVista)) #302 Mon May 29 10:38:58 IST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda rw
rtsched version <20011203.1609.50>
Decrementer Frequency = 300000000/60
Calibrating delay loop... 79.87 BogoMIPS
Memory: 30728k available (1100k kernel code, 344k data, 56k init, 0k highmem) Dentry-cache hash table entries: 4096 (order: 3, 32768 byte?i Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 byte?i Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFI?
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket
Starting kswap?
Disabling the Out Of Memory Killer
JFFS version 1.0, (C) 1999, 2000 Axis Communications A?
LCD device HITACHI 0066 V1.0 initialized on GPI?
CPM UART driver version 0.03
ttyS0 on SMC1 at 0x0280, BRG1

pty: 256 Unix98 ptys config?r?d
block: 64 slots per queue, bat?h=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 block?ize Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IDE phys mem : feff0000...feff0200 (size 0000020`Y
hda: probing with
STATUS(0x50) instead of ALTSTATUS(0xueYhda: ST340015A, ATA DISK dr???hdb:
probing with STATUS(0x00) instead of ALTSTATUS(0x?eYhdb: probing with STATUS(0x00) instead of ALTSTATUS(0x?eYide0 at 0xc3000010-0xc3000017,0xc3000020 on irq 12
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63 Partition check:
`?da:
eth0: FEC ENET Version 0.2, FEC irq 3, MII irq 8, addr 00:a2:63:4c:5d:15
eth0: Phy @ 0x0, type LXT971 (0x001378?2)
loop: loaded (max 8 devices)
init_icm_mtd: chip probing co?nt 0
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
number of CFI chips: 1
init_icm_mtd: bank1, name:ICM0, size:8388608bytes
ICM flash0: Using Static image partition defini?ion
Creating 3 MTD partitions on "IC?0":
0x00200000-0x00400000 : "icm-configs"
0x00400000-0x00440000 : "icm-pbx-grp-conf?gs" 0x00440000-0x004c0000 : "icm-pbx-ext-confi?s"
NET4: Linux TCP/IP 1.0 for NE?4.0
IP Protocols: ICMP, UDP, TCP, ?GM?
IP: routing cache hash table of 512 buckets, 4Kb?t??
TCP: Hash tables configured (established 2048 bind 409vi
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
IP-Config: Incomplete network configuration information.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.p.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recomme?ded
VFS: Mounted root (ext2 filesyst?m).
Freeing unused kernel memory: 56k ?nit

Kernel panic: No init found.  Try passing init= option to kernel.
 <0>Rebooting in 180 seco?ds.N

I am not a member of U-boot users,kindly put a cc to mail id prabhu at signal-networks.com

Thanks and Regards,
V.Prabhu Swamy
Email :prabhu at signal-networks.com