Skip to contentSkip to conversation

mmc: starfive: Add sdio/emmc driver support

bug report Dan Carpenter 2 participants 4 messages Feb 27, 2023 MMC, SD and SDIO

lore
Share & tools
lore
#0 lore raw

Hello William Qiu,

The patch 9e622229bbf4: "mmc: starfive: Add sdio/emmc driver support" from Feb 15, 2023, leads to the following Smatch static checker warning:

drivers/mmc/host/dw_mmc-starfive.c:77 dw_mci_starfive_execute_tuning()
error: uninitialized symbol 'prev_err'.

drivers/mmc/host/dw_mmc-starfive.c

    47 static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
    48                                              u32 opcode)
    49 {
    50         static const int grade  = MAX_DELAY_CHAIN;
    51         struct dw_mci *host = slot->host;
    52         struct starfive_priv *priv = host->priv;
    53         int rise_point = -1, fall_point = -1;
    54         int err, prev_err;
    55         int i;
    56         bool found = 0;
    57         u32 regval;
    58 
    59         /*
    60          * Use grade as the max delay chain, and use the rise_point and
    61          * fall_point to ensure the best sampling point of a data input
    62          * signals.
    63          */
    64         for (i = 0; i < grade; i++) {
    65                 regval = i << priv->syscon_shift;
    66                 err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
    67                                                 priv->syscon_mask, regval);
    68                 if (err)
    69                         return err;
    70                 mci_writel(host, RINTSTS, ALL_INT_CLR);
    71 
    72                 err = mmc_send_tuning(slot->mmc, opcode, NULL);
    73                 if (!err)
    74                         found = 1;
    75 
    76                 if (i > 0) {

--> 77 if (err && !prev_err)

prev_err was never initialized to zero.

    78                                 fall_point = i - 1;
    79                         if (!err && prev_err)
    80                                 rise_point = i;
    81                 }
    82 
    83                 if (rise_point != -1 && fall_point != -1)
    84                         goto tuning_out;
    85 
    86                 prev_err = err;
    87                 err = 0;
    88         }
    89 

regards,
dan carpenter

#1 lore raw
Quoted 40 lines · Dan Carpenter

Hello William Qiu,

The patch 9e622229bbf4: "mmc: starfive: Add sdio/emmc driver support" from Feb 15, 2023, leads to the following Smatch static checker warning:

drivers/mmc/host/dw_mmc-starfive.c:77 dw_mci_starfive_execute_tuning()
error: uninitialized symbol 'prev_err'.

drivers/mmc/host/dw_mmc-starfive.c

    47 static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
    48                                              u32 opcode)
    49 {
    50         static const int grade  = MAX_DELAY_CHAIN;
    51         struct dw_mci *host = slot->host;
    52         struct starfive_priv *priv = host->priv;
    53         int rise_point = -1, fall_point = -1;
    54         int err, prev_err;
    55         int i;
    56         bool found = 0;
    57         u32 regval;
    58 
    59         /*
    60          * Use grade as the max delay chain, and use the rise_point and
    61          * fall_point to ensure the best sampling point of a data input
    62          * signals.
    63          */
    64         for (i = 0; i < grade; i++) {
    65                 regval = i << priv->syscon_shift;
    66                 err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
    67                                                 priv->syscon_mask, regval);
    68                 if (err)
    69                         return err;
    70                 mci_writel(host, RINTSTS, ALL_INT_CLR);
    71 
    72                 err = mmc_send_tuning(slot->mmc, opcode, NULL);
    73                 if (!err)
    74                         found = 1;
    75 
    76                 if (i > 0) {
Quoted 4 lines

--> 77 if (err && !prev_err)

prev_err was never initialized to zero.

Hi Carpenter,

I will fixed it. But what should I do next,send a new version to fixed it or send a patch to you?

Best regards
William

Quoted 15 lines
    78                                 fall_point = i - 1;
    79                         if (!err && prev_err)
    80                                 rise_point = i;
    81                 }
    82 
    83                 if (rise_point != -1 && fall_point != -1)
    84                         goto tuning_out;
    85 
    86                 prev_err = err;
    87                 err = 0;
    88         }
    89 

regards,
dan carpenter

#2 lore raw
Quoted 45 lines · William Qiu
Quoted 42 lines · Dan Carpenter

Hello William Qiu,

The patch 9e622229bbf4: "mmc: starfive: Add sdio/emmc driver support" from Feb 15, 2023, leads to the following Smatch static checker warning:

drivers/mmc/host/dw_mmc-starfive.c:77 dw_mci_starfive_execute_tuning()
error: uninitialized symbol 'prev_err'.

drivers/mmc/host/dw_mmc-starfive.c

    47 static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
    48                                              u32 opcode)
    49 {
    50         static const int grade  = MAX_DELAY_CHAIN;
    51         struct dw_mci *host = slot->host;
    52         struct starfive_priv *priv = host->priv;
    53         int rise_point = -1, fall_point = -1;
    54         int err, prev_err;
    55         int i;
    56         bool found = 0;
    57         u32 regval;
    58 
    59         /*
    60          * Use grade as the max delay chain, and use the rise_point and
    61          * fall_point to ensure the best sampling point of a data input
    62          * signals.
    63          */
    64         for (i = 0; i < grade; i++) {
    65                 regval = i << priv->syscon_shift;
    66                 err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
    67                                                 priv->syscon_mask, regval);
    68                 if (err)
    69                         return err;
    70                 mci_writel(host, RINTSTS, ALL_INT_CLR);
    71 
    72                 err = mmc_send_tuning(slot->mmc, opcode, NULL);
    73                 if (!err)
    74                         found = 1;
    75 
    76                 if (i > 0) {

--> 77 if (err && !prev_err)

Quoted 6 lines
Quoted 2 lines

prev_err was never initialized to zero.

Hi Carpenter,

I will fixed it. But what should I do next,send a new version to fixed it or send a patch to you?

Heh?! No, leave me out of it. Just send a patch with a Fixes tag to the [email protected] and the maintainers and so on. Please give me a Reported-by: Dan Carpenter <[email protected]> credit though.

regards,
dan carpenter

#3 lore raw
Quoted 53 lines · Dan Carpenter
Quoted 45 lines · William Qiu
Quoted 42 lines · Dan Carpenter

Hello William Qiu,

The patch 9e622229bbf4: "mmc: starfive: Add sdio/emmc driver support" from Feb 15, 2023, leads to the following Smatch static checker warning:

drivers/mmc/host/dw_mmc-starfive.c:77 dw_mci_starfive_execute_tuning()
error: uninitialized symbol 'prev_err'.

drivers/mmc/host/dw_mmc-starfive.c

    47 static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
    48                                              u32 opcode)
    49 {
    50         static const int grade  = MAX_DELAY_CHAIN;
    51         struct dw_mci *host = slot->host;
    52         struct starfive_priv *priv = host->priv;
    53         int rise_point = -1, fall_point = -1;
    54         int err, prev_err;
    55         int i;
    56         bool found = 0;
    57         u32 regval;
    58 
    59         /*
    60          * Use grade as the max delay chain, and use the rise_point and
    61          * fall_point to ensure the best sampling point of a data input
    62          * signals.
    63          */
    64         for (i = 0; i < grade; i++) {
    65                 regval = i << priv->syscon_shift;
    66                 err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
    67                                                 priv->syscon_mask, regval);
    68                 if (err)
    69                         return err;
    70                 mci_writel(host, RINTSTS, ALL_INT_CLR);
    71 
    72                 err = mmc_send_tuning(slot->mmc, opcode, NULL);
    73                 if (!err)
    74                         found = 1;
    75 
    76                 if (i > 0) {

--> 77 if (err && !prev_err)

Quoted 6 lines
Quoted 2 lines

prev_err was never initialized to zero.

Hi Carpenter,

I will fixed it. But what should I do next,send a new version to fixed it or send a patch to you?

Quoted 7 lines

Heh?! No, leave me out of it. Just send a patch with a Fixes tag to the [email protected] and the maintainers and so on. Please give me a Reported-by: Dan Carpenter <[email protected]> credit though.

regards,
dan carpenter

Fine, I'll do it then. Thanks anyway.

Best regards
William