Skip to contentSkip to conversation

nfc: s3fwrn5: use devm_clk_get_optional_enabled() helper

PATCH Applied Dmitry Torokhov 3 participants 3 messages Oct 27, 2022 – Oct 28, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 nfc: s3fwrn5: use devm_clk_get_optional_enabled() helper

Because we enable the clock immediately after acquiring it in probe, we can combine the 2 operations and use devm_clk_get_optional_enabled() helper.

---

v2: remove calls to clk_disable_unprepare() as they are not needed anymore

 drivers/nfc/s3fwrn5/i2c.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)
drivers/nfc/s3fwrn5/i2c.c +5 -14
index f824dc7099ce..ecdee838d25d 100644
@@ -209,27 +209,21 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	phy->clk = devm_clk_get_optional(&client->dev, NULL);
-	if (IS_ERR(phy->clk))
-		return dev_err_probe(&client->dev, PTR_ERR(phy->clk),
-				     "failed to get clock\n");
-
 	/*
 	 * S3FWRN5 depends on a clock input ("XI" pin) to function properly.
 	 * Depending on the hardware configuration this could be an always-on
 	 * oscillator or some external clock that must be explicitly enabled.
 	 * Make sure the clock is running before starting S3FWRN5.
 	 */
-	ret = clk_prepare_enable(phy->clk);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed to enable clock: %d\n", ret);
-		return ret;
-	}
+	phy->clk = devm_clk_get_optional_enabled(&client->dev, NULL);
+	if (IS_ERR(phy->clk))
+		return dev_err_probe(&client->dev, PTR_ERR(phy->clk),
+				     "failed to get clock\n");
 
 	ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev,
 			    &i2c_phy_ops);
 	if (ret < 0)
-		goto disable_clk;
+		return ret;
 
 	ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
 		s3fwrn5_i2c_irq_thread_fn, IRQF_ONESHOT,
@@ -241,8 +235,6 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
 
 s3fwrn5_remove:
 	s3fwrn5_remove(phy->common.ndev);
-disable_clk:
-	clk_disable_unprepare(phy->clk);
 	return ret;
 }
 
@@ -251,7 +243,6 @@ static void s3fwrn5_i2c_remove(struct i2c_client *client)
 	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
 
 	s3fwrn5_remove(phy->common.ndev);
-	clk_disable_unprepare(phy->clk);
 }
 
 static const struct i2c_device_id s3fwrn5_i2c_id_table[] = {
Signature · 5 lines
2.38.0.135.g90850a2211-goog


-- 
Dmitry
#2 lore raw
In reply to Dmitry Torokhov
This patch was applied to netdev/net-next.git (master) by David S. Miller <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (master) by David S. Miller <[email protected]>:

Quoted 8 lines · On Thu, 27 Oct 2022 00:34:02 -0700 you wrote:

Because we enable the clock immediately after acquiring it in probe, we can combine the 2 operations and use devm_clk_get_optional_enabled() helper.

---

[...]

Here is the summary with links:
- [net-next,v2] nfc: s3fwrn5: use devm_clk_get_optional_enabled() helper

    https://git.kernel.org/netdev/net-next/c/f8f797f35a9a

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html