Skip to contentSkip to conversation

drm/amdgpu: Replace one-element array with flex-array member

PATCH Applied Paulo Miguel Almeida 2 participants 3 messages Nov 9, 2022 – Nov 10, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/amdgpu: Replace one-element array with flex-array member

One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_CONNECTOR_DEVICE_TAG_RECORD, _ATOM_OBJECT_GPIO_CNTL_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3, _ATOM_FUSION_SYSTEM_INFO_V3, _ATOM_I2C_DATA_RECORD, _ATOM_I2C_DEVICE_SETUP_INFO, _ATOM_ASIC_MVDD_INFO and refactor the rest of the code accordingly. While at it, removed a redundant casting.

Important to mention is that doing a build before/after this patch results in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1].

---

Alex, I noticed a few structs in atombios.h that were not referenced. Is there any appetite for removing them? Or is that one of those cases where the structs are there should one driver ever need it?

Ex.:
struct _ATOM_I2C_DATA_RECORD
struct _ATOM_I2C_DEVICE_SETUP_INFO
struct _ATOM_ASIC_MVDD_INFO

---
 .../gpu/drm/amd/display/dc/bios/bios_parser.c    |  5 ++---
 drivers/gpu/drm/amd/include/atombios.h           | 16 ++++++++--------
 2 files changed, 10 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +2 -3
index 39dd8b2dc254..6b9e64cd4379 100644
@@ -2606,8 +2606,7 @@ static enum bp_result update_slot_layout_info(
 
 	for (;;) {
 
-		record_header = (ATOM_COMMON_RECORD_HEADER *)
-			GET_IMAGE(ATOM_COMMON_RECORD_HEADER, record_offset);
+		record_header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, record_offset);
 		if (record_header == NULL) {
 			result = BP_RESULT_BADBIOSTABLE;
 			break;
@@ -2621,7 +2620,7 @@ static enum bp_result update_slot_layout_info(
 
 		if (record_header->ucRecordType ==
 			ATOM_BRACKET_LAYOUT_RECORD_TYPE &&
-			sizeof(ATOM_BRACKET_LAYOUT_RECORD)
+			struct_size(record, asConnInfo, 1)
 			<= record_header->ucRecordSize) {
 			record = (ATOM_BRACKET_LAYOUT_RECORD *)
 				(record_header);
drivers/gpu/drm/amd/include/atombios.h +8 -8
index 55ae93c1e365..60c44a8a067f 100644
@@ -4733,7 +4733,7 @@ typedef struct  _ATOM_CONNECTOR_DEVICE_TAG_RECORD
   ATOM_COMMON_RECORD_HEADER   sheader;
   UCHAR                       ucNumberOfDevice;
   UCHAR                       ucReserved;
-  ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[1];         //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
+  ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[];	       //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
 }ATOM_CONNECTOR_DEVICE_TAG_RECORD;
 
 
@@ -4793,7 +4793,7 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
   ATOM_COMMON_RECORD_HEADER   sheader;
   UCHAR                       ucFlags;                // Future expnadibility
   UCHAR                       ucNumberOfPins;         // Number of GPIO pins used to control the object
-  ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[1];              // the real gpio pin pair determined by number of pins ucNumberOfPins
+  ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[];               // the real gpio pin pair determined by number of pins ucNumberOfPins
 }ATOM_OBJECT_GPIO_CNTL_RECORD;
 
 //Definitions for GPIO pin state
@@ -4982,7 +4982,7 @@ typedef struct  _ATOM_BRACKET_LAYOUT_RECORD
   UCHAR                       ucWidth;
   UCHAR                       ucConnNum;
   UCHAR                       ucReserved;
-  ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[1];
+  ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[];
 }ATOM_BRACKET_LAYOUT_RECORD;
 
 
@@ -5161,7 +5161,7 @@ typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
    UCHAR  ucPhaseDelay;                      // phase delay in unit of micro second
    UCHAR  ucReserved;
    ULONG  ulGpioMaskVal;                     // GPIO Mask value
-   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];
+   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[];
 }ATOM_GPIO_VOLTAGE_OBJECT_V3;
 
 typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
@@ -5171,7 +5171,7 @@ typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
    UCHAR    ucLeakageEntryNum;               // indicate the entry number of LeakageId/Voltage Lut table
    UCHAR    ucReserved[2];
    ULONG    ulMaxVoltageLevel;
-   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
+   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[];
 }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
 
 
@@ -6599,7 +6599,7 @@ typedef struct _ATOM_FUSION_SYSTEM_INFO_V3
 typedef struct _ATOM_I2C_DATA_RECORD
 {
   UCHAR         ucNunberOfBytes;                                              //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
-  UCHAR         ucI2CData[1];                                                 //I2C data in bytes, should be less than 16 bytes usually
+  UCHAR         ucI2CData[];                                                  //I2C data in bytes, should be less than 16 bytes usually
 }ATOM_I2C_DATA_RECORD;
 
 
@@ -6610,14 +6610,14 @@ typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
   UCHAR                              ucSSChipID;             //SS chip being used
   UCHAR                              ucSSChipSlaveAddr;      //Slave Address to set up this SS chip
   UCHAR                           ucNumOfI2CDataRecords;  //number of data block
-  ATOM_I2C_DATA_RECORD            asI2CData[1];
+  ATOM_I2C_DATA_RECORD            asI2CData[];
 }ATOM_I2C_DEVICE_SETUP_INFO;
 
 //==========================================================================================
 typedef struct  _ATOM_ASIC_MVDD_INFO
 {
   ATOM_COMMON_TABLE_HEADER         sHeader;
-  ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[1];
+  ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[];
 }ATOM_ASIC_MVDD_INFO;
 
 //==========================================================================================
Signature · 1 line
2.37.3
#1 lore raw
Quoted 21 lines · Paulo Miguel Almeida

One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_CONNECTOR_DEVICE_TAG_RECORD, _ATOM_OBJECT_GPIO_CNTL_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3, _ATOM_FUSION_SYSTEM_INFO_V3, _ATOM_I2C_DATA_RECORD, _ATOM_I2C_DEVICE_SETUP_INFO, _ATOM_ASIC_MVDD_INFO and refactor the rest of the code accordingly. While at it, removed a redundant casting.

Important to mention is that doing a build before/after this patch results in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1].

Quoted 6 lines

---

Alex, I noticed a few structs in atombios.h that were not referenced. Is there any appetite for removing them? Or is that one of those cases where the structs are there should one driver ever need it?

A lot of userspace tools use these tables and I'd like to keep the headers compatible. Also, as I mentioned in the other thread, the atombios command tables often parse these tables when initializing the hardware so when you are debugging a command table, it helps to have the relevant structures defined so it's easier to understand what the command tables are doing.

Alex

Quoted 111 lines

Ex.:
struct _ATOM_I2C_DATA_RECORD
struct _ATOM_I2C_DEVICE_SETUP_INFO
struct _ATOM_ASIC_MVDD_INFO

---
 .../gpu/drm/amd/display/dc/bios/bios_parser.c    |  5 ++---
 drivers/gpu/drm/amd/include/atombios.h           | 16 ++++++++--------
 2 files changed, 10 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +2 -3
index 39dd8b2dc254..6b9e64cd4379 100644
@@ -2606,8 +2606,7 @@ static enum bp_result update_slot_layout_info(
 
        for (;;) {
 
-               record_header = (ATOM_COMMON_RECORD_HEADER *)
-                       GET_IMAGE(ATOM_COMMON_RECORD_HEADER, record_offset);
+               record_header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, record_offset);
                if (record_header == NULL) {
                        result = BP_RESULT_BADBIOSTABLE;
                        break;
@@ -2621,7 +2620,7 @@ static enum bp_result update_slot_layout_info(
 
                if (record_header->ucRecordType ==
                        ATOM_BRACKET_LAYOUT_RECORD_TYPE &&
-                       sizeof(ATOM_BRACKET_LAYOUT_RECORD)
+                       struct_size(record, asConnInfo, 1)
                        <= record_header->ucRecordSize) {
                        record = (ATOM_BRACKET_LAYOUT_RECORD *)
                                (record_header);
drivers/gpu/drm/amd/include/atombios.h +8 -9
index 55ae93c1e365..60c44a8a067f 100644
@@ -4733,7 +4733,7 @@ typedef struct  _ATOM_CONNECTOR_DEVICE_TAG_RECORD
   ATOM_COMMON_RECORD_HEADER   sheader;
   UCHAR                       ucNumberOfDevice;
   UCHAR                       ucReserved;
-  ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[1];         //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
+  ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[];          //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
 }ATOM_CONNECTOR_DEVICE_TAG_RECORD;
 
 
@@ -4793,7 +4793,7 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
   ATOM_COMMON_RECORD_HEADER   sheader;
   UCHAR                       ucFlags;                // Future expnadibility
   UCHAR                       ucNumberOfPins;         // Number of GPIO pins used to control the object
-  ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[1];              // the real gpio pin pair determined by number of pins ucNumberOfPins
+  ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[];               // the real gpio pin pair determined by number of pins ucNumberOfPins
 }ATOM_OBJECT_GPIO_CNTL_RECORD;
 
 //Definitions for GPIO pin state
@@ -4982,7 +4982,7 @@ typedef struct  _ATOM_BRACKET_LAYOUT_RECORD
   UCHAR                       ucWidth;
   UCHAR                       ucConnNum;
   UCHAR                       ucReserved;
-  ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[1];
+  ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[];
 }ATOM_BRACKET_LAYOUT_RECORD;
 
 
@@ -5161,7 +5161,7 @@ typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
    UCHAR  ucPhaseDelay;                      // phase delay in unit of micro second
    UCHAR  ucReserved;
    ULONG  ulGpioMaskVal;                     // GPIO Mask value
-   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];
+   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[];
 }ATOM_GPIO_VOLTAGE_OBJECT_V3;
 
 typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
@@ -5171,7 +5171,7 @@ typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
    UCHAR    ucLeakageEntryNum;               // indicate the entry number of LeakageId/Voltage Lut table
    UCHAR    ucReserved[2];
    ULONG    ulMaxVoltageLevel;
-   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
+   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[];
 }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
 
 
@@ -6599,7 +6599,7 @@ typedef struct _ATOM_FUSION_SYSTEM_INFO_V3
 typedef struct _ATOM_I2C_DATA_RECORD
 {
   UCHAR         ucNunberOfBytes;                                              //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
-  UCHAR         ucI2CData[1];                                                 //I2C data in bytes, should be less than 16 bytes usually
+  UCHAR         ucI2CData[];                                                  //I2C data in bytes, should be less than 16 bytes usually
 }ATOM_I2C_DATA_RECORD;
 
 
@@ -6610,14 +6610,14 @@ typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
   UCHAR                              ucSSChipID;             //SS chip being used
   UCHAR                              ucSSChipSlaveAddr;      //Slave Address to set up this SS chip
   UCHAR                           ucNumOfI2CDataRecords;  //number of data block
-  ATOM_I2C_DATA_RECORD            asI2CData[1];
+  ATOM_I2C_DATA_RECORD            asI2CData[];
 }ATOM_I2C_DEVICE_SETUP_INFO;
 
 //==========================================================================================
 typedef struct  _ATOM_ASIC_MVDD_INFO
 {
   ATOM_COMMON_TABLE_HEADER         sHeader;
-  ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[1];
+  ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[];
 }ATOM_ASIC_MVDD_INFO;
 
 //==========================================================================================
--

2.37.3

Applied
#2 lore raw
Quoted 31 lines · Alex Deucher
Quoted 21 lines · Paulo Miguel Almeida

One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_CONNECTOR_DEVICE_TAG_RECORD, _ATOM_OBJECT_GPIO_CNTL_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3, _ATOM_FUSION_SYSTEM_INFO_V3, _ATOM_I2C_DATA_RECORD, _ATOM_I2C_DEVICE_SETUP_INFO, _ATOM_ASIC_MVDD_INFO and refactor the rest of the code accordingly. While at it, removed a redundant casting.

Important to mention is that doing a build before/after this patch results in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1].

Quoted 6 lines

---

Alex, I noticed a few structs in atombios.h that were not referenced. Is there any appetite for removing them? Or is that one of those cases where the structs are there should one driver ever need it?

Quoted 6 lines

A lot of userspace tools use these tables and I'd like to keep the headers compatible. Also, as I mentioned in the other thread, the atombios command tables often parse these tables when initializing the hardware so when you are debugging a command table, it helps to have the relevant structures defined so it's easier to understand what the command tables are doing.

Also, because this header is shared by multiple components within AMD (linux, windows, bios, etc.), it would make things a lot easier if we maintained compatibility.

Applied this patch. Thanks,

Alex

Quoted 115 lines

Alex

Quoted 111 lines

Ex.:
struct _ATOM_I2C_DATA_RECORD
struct _ATOM_I2C_DEVICE_SETUP_INFO
struct _ATOM_ASIC_MVDD_INFO

---
 .../gpu/drm/amd/display/dc/bios/bios_parser.c    |  5 ++---
 drivers/gpu/drm/amd/include/atombios.h           | 16 ++++++++--------
 2 files changed, 10 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +2 -3
index 39dd8b2dc254..6b9e64cd4379 100644
@@ -2606,8 +2606,7 @@ static enum bp_result update_slot_layout_info(
 
        for (;;) {
 
-               record_header = (ATOM_COMMON_RECORD_HEADER *)
-                       GET_IMAGE(ATOM_COMMON_RECORD_HEADER, record_offset);
+               record_header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, record_offset);
                if (record_header == NULL) {
                        result = BP_RESULT_BADBIOSTABLE;
                        break;
@@ -2621,7 +2620,7 @@ static enum bp_result update_slot_layout_info(
 
                if (record_header->ucRecordType ==
                        ATOM_BRACKET_LAYOUT_RECORD_TYPE &&
-                       sizeof(ATOM_BRACKET_LAYOUT_RECORD)
+                       struct_size(record, asConnInfo, 1)
                        <= record_header->ucRecordSize) {
                        record = (ATOM_BRACKET_LAYOUT_RECORD *)
                                (record_header);
drivers/gpu/drm/amd/include/atombios.h +8 -9
index 55ae93c1e365..60c44a8a067f 100644
@@ -4733,7 +4733,7 @@ typedef struct  _ATOM_CONNECTOR_DEVICE_TAG_RECORD
   ATOM_COMMON_RECORD_HEADER   sheader;
   UCHAR                       ucNumberOfDevice;
   UCHAR                       ucReserved;
-  ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[1];         //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
+  ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[];          //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
 }ATOM_CONNECTOR_DEVICE_TAG_RECORD;
 
 
@@ -4793,7 +4793,7 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
   ATOM_COMMON_RECORD_HEADER   sheader;
   UCHAR                       ucFlags;                // Future expnadibility
   UCHAR                       ucNumberOfPins;         // Number of GPIO pins used to control the object
-  ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[1];              // the real gpio pin pair determined by number of pins ucNumberOfPins
+  ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[];               // the real gpio pin pair determined by number of pins ucNumberOfPins
 }ATOM_OBJECT_GPIO_CNTL_RECORD;
 
 //Definitions for GPIO pin state
@@ -4982,7 +4982,7 @@ typedef struct  _ATOM_BRACKET_LAYOUT_RECORD
   UCHAR                       ucWidth;
   UCHAR                       ucConnNum;
   UCHAR                       ucReserved;
-  ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[1];
+  ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[];
 }ATOM_BRACKET_LAYOUT_RECORD;
 
 
@@ -5161,7 +5161,7 @@ typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
    UCHAR  ucPhaseDelay;                      // phase delay in unit of micro second
    UCHAR  ucReserved;
    ULONG  ulGpioMaskVal;                     // GPIO Mask value
-   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];
+   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[];
 }ATOM_GPIO_VOLTAGE_OBJECT_V3;
 
 typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
@@ -5171,7 +5171,7 @@ typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
    UCHAR    ucLeakageEntryNum;               // indicate the entry number of LeakageId/Voltage Lut table
    UCHAR    ucReserved[2];
    ULONG    ulMaxVoltageLevel;
-   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
+   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[];
 }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
 
 
@@ -6599,7 +6599,7 @@ typedef struct _ATOM_FUSION_SYSTEM_INFO_V3
 typedef struct _ATOM_I2C_DATA_RECORD
 {
   UCHAR         ucNunberOfBytes;                                              //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
-  UCHAR         ucI2CData[1];                                                 //I2C data in bytes, should be less than 16 bytes usually
+  UCHAR         ucI2CData[];                                                  //I2C data in bytes, should be less than 16 bytes usually
 }ATOM_I2C_DATA_RECORD;
 
 
@@ -6610,14 +6610,14 @@ typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
   UCHAR                              ucSSChipID;             //SS chip being used
   UCHAR                              ucSSChipSlaveAddr;      //Slave Address to set up this SS chip
   UCHAR                           ucNumOfI2CDataRecords;  //number of data block
-  ATOM_I2C_DATA_RECORD            asI2CData[1];
+  ATOM_I2C_DATA_RECORD            asI2CData[];
 }ATOM_I2C_DEVICE_SETUP_INFO;
 
 //==========================================================================================
 typedef struct  _ATOM_ASIC_MVDD_INFO
 {
   ATOM_COMMON_TABLE_HEADER         sHeader;
-  ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[1];
+  ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[];
 }ATOM_ASIC_MVDD_INFO;
 
 //==========================================================================================
--

2.37.3