Skip to contentSkip to conversation

staging: rtl8192e: matched alignment with open parenthesis

PATCH In review Mitali Borkar 2 participants 5 messages Apr 10, 2021 – Apr 13, 2021 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 4/6 staging: rtl8192e: matched alignment with open parenthesis

Matched the alignment with open parenthesis to meet linux kernel coding style.
Reported by checkpatch.

---
 drivers/staging/rtl8192e/rtl819x_HTProc.c | 20 ++++++++++----------
 drivers/staging/rtl8192e/rtl819x_TSProc.c | 18 +++++++++---------
 2 files changed, 19 insertions(+), 19 deletions(-)
drivers/staging/rtl8192e/rtl819x_HTProc.c +10 -10
index 0ded86da1562..12f31ba9aa13 100644
@@ -154,7 +154,7 @@ bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
 	    (net->ralink_cap_exist))
 		retValue = true;
 	else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||
-		!memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
+		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
 		!memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ||
 		(net->broadcom_cap_exist))
 		retValue = true;
@@ -547,7 +547,7 @@ void HTOnAssocRsp(struct rtllib_device *ieee)
 			     pPeerHTCap, sizeof(struct ht_capab_ele));
 #endif
 	HTSetConnectBwMode(ieee, (enum ht_channel_width)(pPeerHTCap->ChlWidth),
-			  (enum ht_extchnl_offset)(pPeerHTInfo->ExtChlOffset));
+			   (enum ht_extchnl_offset)(pPeerHTInfo->ExtChlOffset));
 	pHTInfo->bCurTxBW40MHz = ((pPeerHTInfo->RecommemdedTxWidth == 1) ?
 				 true : false);
 
@@ -574,9 +574,9 @@ void HTOnAssocRsp(struct rtllib_device *ieee)
 
 	pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
 	if (ieee->rtllib_ap_sec_type &&
-	   (ieee->rtllib_ap_sec_type(ieee) & (SEC_ALG_WEP | SEC_ALG_TKIP))) {
+	    (ieee->rtllib_ap_sec_type(ieee) & (SEC_ALG_WEP | SEC_ALG_TKIP))) {
 		if ((pHTInfo->IOTPeer == HT_IOT_PEER_ATHEROS) ||
-				(pHTInfo->IOTPeer == HT_IOT_PEER_UNKNOWN))
+		    (pHTInfo->IOTPeer == HT_IOT_PEER_UNKNOWN))
 			pHTInfo->bCurrentAMPDUEnable = false;
 	}
 
@@ -626,7 +626,7 @@ void HTOnAssocRsp(struct rtllib_device *ieee)
 	else
 		pMcsFilter = MCS_FILTER_ALL;
 	ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee,
-				   ieee->dot11HTOperationalRateSet, pMcsFilter);
+						       ieee->dot11HTOperationalRateSet, pMcsFilter);
 	ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
 
 	pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
@@ -654,13 +654,13 @@ void HTInitializeHTInfo(struct rtllib_device *ieee)
 	pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
 
 	memset((void *)(&(pHTInfo->SelfHTCap)), 0,
-		sizeof(pHTInfo->SelfHTCap));
+	       sizeof(pHTInfo->SelfHTCap));
 	memset((void *)(&(pHTInfo->SelfHTInfo)), 0,
-		sizeof(pHTInfo->SelfHTInfo));
+	       sizeof(pHTInfo->SelfHTInfo));
 	memset((void *)(&(pHTInfo->PeerHTCapBuf)), 0,
-		sizeof(pHTInfo->PeerHTCapBuf));
+	       sizeof(pHTInfo->PeerHTCapBuf));
 	memset((void *)(&(pHTInfo->PeerHTInfoBuf)), 0,
-		sizeof(pHTInfo->PeerHTInfoBuf));
+	       sizeof(pHTInfo->PeerHTInfoBuf));
 
 	pHTInfo->bSwBwInProgress = false;
 
@@ -815,7 +815,7 @@ void HTUseDefaultSetting(struct rtllib_device *ieee)
 		HTFilterMCSRate(ieee, ieee->Regdot11TxHTOperationalRateSet,
 				ieee->dot11HTOperationalRateSet);
 		ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee,
-					   ieee->dot11HTOperationalRateSet,
+							       ieee->dot11HTOperationalRateSet,
 					   MCS_FILTER_ALL);
 		ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
 
drivers/staging/rtl8192e/rtl819x_TSProc.c +9 -9
index 1b994a57633f..65eac33aaa5b 100644
@@ -34,7 +34,7 @@ static void RxPktPendingTimeout(struct timer_list *t)
 		while (!list_empty(&pRxTs->rx_pending_pkt_list)) {
 			pReorderEntry = (struct rx_reorder_entry *)
 					list_entry(pRxTs->rx_pending_pkt_list.prev,
-					struct rx_reorder_entry, List);
+						   struct rx_reorder_entry, List);
 			if (index == 0)
 				pRxTs->rx_indicate_seq = pReorderEntry->SeqNum;
 
@@ -45,7 +45,7 @@ static void RxPktPendingTimeout(struct timer_list *t)
 				list_del_init(&pReorderEntry->List);
 
 				if (SN_EQUAL(pReorderEntry->SeqNum,
-				    pRxTs->rx_indicate_seq))
+					     pRxTs->rx_indicate_seq))
 					pRxTs->rx_indicate_seq =
 					      (pRxTs->rx_indicate_seq + 1) % 4096;
 
@@ -158,7 +158,7 @@ void TSInitialize(struct rtllib_device *ieee)
 
 		ResetTxTsEntry(pTxTS);
 		list_add_tail(&pTxTS->TsCommonInfo.List,
-				&ieee->Tx_TS_Unused_List);
+			      &ieee->Tx_TS_Unused_List);
 		pTxTS++;
 	}
 
@@ -276,7 +276,7 @@ static void MakeTSEntry(struct ts_common_info *pTsCommonInfo, u8 *Addr,
 
 	if (pTSPEC != NULL)
 		memcpy((u8 *)(&(pTsCommonInfo->TSpec)), (u8 *)pTSPEC,
-			sizeof(union tspec_body));
+		       sizeof(union tspec_body));
 
 	for (count = 0; count < TCLAS_Num; count++)
 		memcpy((u8 *)(&(pTsCommonInfo->TClass[count])),
@@ -355,14 +355,14 @@ bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS,
 		if (TxRxSelect == TX_DIR) {
 			struct tx_ts_record *tmp =
 				container_of(*ppTS,
-				struct tx_ts_record,
-				TsCommonInfo);
+					     struct tx_ts_record,
+					     TsCommonInfo);
 			ResetTxTsEntry(tmp);
 		} else {
 			struct rx_ts_record *tmp =
 				 container_of(*ppTS,
-				 struct rx_ts_record,
-				 ts_common_info);
+					      struct rx_ts_record,
+					      ts_common_info);
 			ResetRxTsEntry(tmp);
 		}
 
@@ -409,7 +409,7 @@ static void RemoveTsEntry(struct rtllib_device *ieee,
 		while (!list_empty(&pRxTS->rx_pending_pkt_list)) {
 			pRxReorderEntry = (struct rx_reorder_entry *)
 					list_entry(pRxTS->rx_pending_pkt_list.prev,
-					struct rx_reorder_entry, List);
+						   struct rx_reorder_entry, List);
 			netdev_dbg(ieee->dev,  "%s(): Delete SeqNum %d!\n",
 				   __func__, pRxReorderEntry->SeqNum);
 			list_del_init(&pRxReorderEntry->List);
Signature · 1 line
2.30.2
#1 lore raw
Quoted 3 lines · Mitali Borkar

Matched the alignment with open parenthesis to meet linux kernel coding style.
Reported by checkpatch.

[]

drivers/staging/rtl8192e/rtl819x_HTProc.c

Quoted 1 line
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0

[]

Quoted 8 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0
@@ -154,7 +154,7 @@ bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
 �	    (net->ralink_cap_exist))
 �		retValue = true;

� else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		!memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
+		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||

� !memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ||
� (net->broadcom_cap_exist))

checkpatch is a stupid script.
Look further at the code not just at what checkpatch reports. Align all the contination lines, not just the first one.

It might be sensible to add a generic function like

static inline bool ether_oui_equal(const u8 *addr, const u8 *oui)

{
	return addr[0] == oui[0] && addr[1] == oui[1] && addr[2] == oui[2];
}	

to include/linux/etherdevice.h

(Maybe use & instead of && if it's speed sensitive)

so this would read

	else if (ether_oui_equal(net->bssid, UNKNOWN_BORADCOM) ||
		 ether_oui_equal(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM) ||
		 ether_oui_equal(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM) ||
		 net->broacom_cap_exist)

and it'd also be good to correct the typo of UNKNOWN_BORADCOM globally.

drivers/staging/rtl8192e/rtl819x_HTProc.c void HTInitializeHTInfo(struct rtllib_device *ieee) · line 657

Quoted 7 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0
@@ -654,13 +654,13 @@ void HTInitializeHTInfo(struct rtllib_device *ieee)
 �	pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;

�

� memset((void *)(&(pHTInfo->SelfHTCap)), 0,

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		sizeof(pHTInfo->SelfHTCap));
+	       sizeof(pHTInfo->SelfHTCap));

Doesn't need casts or parentheses.

	memset(&pHTInfo->SelfHTCap, 0, sizeof(pHTInfo->SelfHCap));

drivers/staging/rtl8192e/rtl819x_HTProc.c void HTInitializeHTInfo(struct rtllib_device *ieee) · line 659

Quoted 3 lines

� memset((void *)(&(pHTInfo->SelfHTInfo)), 0,

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		sizeof(pHTInfo->SelfHTInfo));
+	       sizeof(pHTInfo->SelfHTInfo));

etc...

drivers/staging/rtl8192e/rtl819x_HTProc.c void HTUseDefaultSetting(struct rtllib_device *ieee) · line 819

Quoted 7 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
@@ -815,7 +815,7 @@ void HTUseDefaultSetting(struct rtllib_device *ieee)
 �		HTFilterMCSRate(ieee, ieee->Regdot11TxHTOperationalRateSet,
 �				ieee->dot11HTOperationalRateSet);
 �		ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee,
-					   ieee->dot11HTOperationalRateSet,
+							       ieee->dot11HTOperationalRateSet,
 �					   MCS_FILTER_ALL);

multi line statement alignment etc...

#2 lore raw
Quoted 7 lines · Joe Perches
Quoted 3 lines · Mitali Borkar

Matched the alignment with open parenthesis to meet linux kernel coding style.
Reported by checkpatch.

[]

drivers/staging/rtl8192e/rtl819x_HTProc.c

Quoted 1 line
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0

[]

Quoted 13 lines
Quoted 8 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0
@@ -154,7 +154,7 @@ bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
  	    (net->ralink_cap_exist))
  		retValue = true;

  else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		!memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
+		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||

  !memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) || (net->broadcom_cap_exist))

checkpatch is a stupid script.
Look further at the code not just at what checkpatch reports. Align all the contination lines, not just the first one.

Sir, I have aligned them in last patch of this patchset.

Quoted 11 lines

It might be sensible to add a generic function like

static inline bool ether_oui_equal(const u8 *addr, const u8 *oui)

{
	return addr[0] == oui[0] && addr[1] == oui[1] && addr[2] == oui[2];
}	

to include/linux/etherdevice.h

(Maybe use & instead of && if it's speed sensitive)

Quoted 9 lines

so this would read

	else if (ether_oui_equal(net->bssid, UNKNOWN_BORADCOM) ||
		 ether_oui_equal(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM) ||
		 ether_oui_equal(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM) ||
		 net->broacom_cap_exist)

and it'd also be good to correct the typo of UNKNOWN_BORADCOM globally.

I will look into this.

Quoted 4 lines
Quoted 4 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0
@@ -654,13 +654,13 @@ void HTInitializeHTInfo(struct rtllib_device *ieee)
  	pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;

Quoted 8 lines

drivers/staging/rtl8192e/rtl819x_HTProc.c void HTInitializeHTInfo(struct rtllib_device *ieee) · line 657

Quoted 3 lines

  memset((void *)(&(pHTInfo->SelfHTCap)), 0,

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		sizeof(pHTInfo->SelfHTCap));
+	       sizeof(pHTInfo->SelfHTCap));

Doesn't need casts or parentheses.

	memset(&pHTInfo->SelfHTCap, 0, sizeof(pHTInfo->SelfHCap));

Ok Sir, i am on it.

Quoted 6 lines

drivers/staging/rtl8192e/rtl819x_HTProc.c void HTInitializeHTInfo(struct rtllib_device *ieee) · line 659

Quoted 3 lines

  memset((void *)(&(pHTInfo->SelfHTInfo)), 0,

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		sizeof(pHTInfo->SelfHTInfo));
+	       sizeof(pHTInfo->SelfHTInfo));

etc...

Quoted 10 lines

drivers/staging/rtl8192e/rtl819x_HTProc.c void HTUseDefaultSetting(struct rtllib_device *ieee) · line 819

Quoted 7 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
@@ -815,7 +815,7 @@ void HTUseDefaultSetting(struct rtllib_device *ieee)
  		HTFilterMCSRate(ieee, ieee->Regdot11TxHTOperationalRateSet,
  				ieee->dot11HTOperationalRateSet);
  		ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee,
-					   ieee->dot11HTOperationalRateSet,
+							       ieee->dot11HTOperationalRateSet,
  					   MCS_FILTER_ALL);

multi line statement alignment etc...

Sir, I have aligned this patch 6/6

Quoted 1 line
#3 lore raw
Quoted 21 lines · Mitali Borkar
Quoted 7 lines · Joe Perches
Quoted 3 lines · Mitali Borkar

Matched the alignment with open parenthesis to meet linux kernel coding style.
Reported by checkpatch.

[]

drivers/staging/rtl8192e/rtl819x_HTProc.c

Quoted 1 line
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0

[]

Quoted 13 lines
Quoted 8 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0
@@ -154,7 +154,7 @@ bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
 �	    (net->ralink_cap_exist))
 �		retValue = true;

� else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		!memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
+		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||

� !memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ||
� (net->broadcom_cap_exist))

checkpatch is a stupid script.
Look further at the code not just at what checkpatch reports. Align all the contination lines, not just the first one.

Quoted 1 line

Sir, I have aligned them in last patch of this patchset.

This sort of change should not require an additional patch.

#4 lore raw
Quoted 22 lines · Joe Perches
Quoted 21 lines · Mitali Borkar
Quoted 20 lines · Joe Perches
Quoted 3 lines · Mitali Borkar

Matched the alignment with open parenthesis to meet linux kernel coding style.
Reported by checkpatch.

[]

drivers/staging/rtl8192e/rtl819x_HTProc.c

Quoted 1 line
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0

[]

Quoted 8 lines
drivers/staging/rtl8192e/rtl819x_HTProc.c +0 -0
@@ -154,7 +154,7 @@ bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
  	    (net->ralink_cap_exist))
  		retValue = true;

  else if (!memcmp(net->bssid, UNKNOWN_BORADCOM, 3) ||

drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -1
-		!memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||
+		 !memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) ||

  !memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) || (net->broadcom_cap_exist))

checkpatch is a stupid script.
Look further at the code not just at what checkpatch reports. Align all the contination lines, not just the first one.

Quoted 4 lines
Quoted 1 line

Sir, I have aligned them in last patch of this patchset.

This sort of change should not require an additional patch.

So now should I compile this as a patchset of 5, removing the last patch of alignment?

Quoted 1 line