2.4.23 : timeouts and lost interrupts using IDE-SCSI
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 3 lines · Jimmie Mayfield
Since upgrading from 2.4.20 to 2.4.23, I can no longer mount my ATAPI CDROM and CDR/W drives using IDE-SCSI. Attempts to mount those drives result in lost interrupts messages:
That is normal and intended. You should see some "dma disabled" messages in your kernel-log (unless if you haven't enabled "DMA only for disks"). ATAPI/cdrom does not work reliable with DMA on 2.4. I think Andre Hedrick has switched that off after 2.4.20. If you really want ide-scsi with dma you should try 2.6.
This is how it should like:
SCSI subsystem driver Revision: 1.00
hdb: attached ide-scsi driver.
hdb: DMA disabled <------
hdd: attached ide-scsi driver.
hdd: DMA disabled <------
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: COMPAQ Model: CD-ROM LTN485 Rev: KQA4 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HP Model: CD-Writer+ 9100b Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02
So you should disable that option in your config or if you prefer using hdparm try it with "-d0 /dev/cdrom".
*Kristian
Quoted 7 lines · Kristian Peters
Quoted 3 lines · Jimmie Mayfield
Since upgrading from 2.4.20 to 2.4.23, I can no longer mount my ATAPI CDROM and CDR/W drives using IDE-SCSI. Attempts to mount those drives result in lost interrupts messages:
That is ... intended.
Huh? Losing interrupts is intended?
Daniel
Signature · 2 lines
Daniel Barclay [email protected]