Skip to contentSkip to conversation

Add MNT Reform 2 board support

PATCH Superseded Patrick Wildt 1 participant 3 messages Jul 10, 2021

Subsystems (3)

v1 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

cover Add MNT Reform 2 board support

The MNT Reform 2 is a modular DIY laptop. In its initial version it is based on the BoundaryDevices i.MX8MQ SoM. Some parts have been lifted from BoundaryDevices official U-Boot downstream project.

The device tree has not yet been merged into mainline Linux, but it's already available as v4 on the Linux ARM Kernel Architecture mailing list, which hopefully will now be merged as is.

This U-Boot patchset supports the serial console, the SD card and eMMC, and Gigabit Ethernet.

Best regards,
Patrick

Patrick Wildt (2):
arm: dts: imx8mq: add MNT Reform 2
board: mntre: imx8mq: Add MNT Reform 2 board support

 arch/arm/dts/Makefile                         |    1 +
 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi   |   11 +
 arch/arm/dts/imx8mq-mnt-reform2.dts           |  164 +++
 arch/arm/dts/imx8mq-nitrogen-som.dtsi         |  275 +++++
 arch/arm/mach-imx/imx8m/Kconfig               |    6 +
 board/mntre/imx8mq_reform2/Kconfig            |   12 +
 board/mntre/imx8mq_reform2/MAINTAINERS        |    7 +
 board/mntre/imx8mq_reform2/Makefile           |   12 +
 board/mntre/imx8mq_reform2/imx8mq_reform2.c   |  215 ++++
 board/mntre/imx8mq_reform2/lpddr4_timing.c    | 1014 +++++++++++++++++
 .../mntre/imx8mq_reform2/lpddr4_timing_ch2.h  |   95 ++
 board/mntre/imx8mq_reform2/spl.c              |  260 +++++
 configs/imx8mq_reform2_defconfig              |   56 +
 include/configs/imx8mq_reform2.h              |  149 +++
 14 files changed, 2277 insertions(+)
 create mode 100644 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mq-mnt-reform2.dts
 create mode 100644 arch/arm/dts/imx8mq-nitrogen-som.dtsi
 create mode 100644 board/mntre/imx8mq_reform2/Kconfig
 create mode 100644 board/mntre/imx8mq_reform2/MAINTAINERS
 create mode 100644 board/mntre/imx8mq_reform2/Makefile
 create mode 100644 board/mntre/imx8mq_reform2/imx8mq_reform2.c
 create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing.c
 create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h
 create mode 100644 board/mntre/imx8mq_reform2/spl.c
 create mode 100644 configs/imx8mq_reform2_defconfig
 create mode 100644 include/configs/imx8mq_reform2.h
Signature · 1 line
2.32.0
#1 lore raw

PATCH 1/2 arm: dts: imx8mq: add MNT Reform 2

Device tree taken from v4 of the MNT Reform 2 series on the Linux ARM Kernel Architecture mailing list:

https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=500045

---
 arch/arm/dts/Makefile                 |   1 +
 arch/arm/dts/imx8mq-mnt-reform2.dts   | 164 +++++++++++++++
 arch/arm/dts/imx8mq-nitrogen-som.dtsi | 275 ++++++++++++++++++++++++++
 3 files changed, 440 insertions(+)
 create mode 100644 arch/arm/dts/imx8mq-mnt-reform2.dts
 create mode 100644 arch/arm/dts/imx8mq-nitrogen-som.dtsi
arch/arm/dts/Makefile +1 -0
index 59d8078558..e01924c797 100644
@@ -873,6 +873,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-evk.dtb \
 	imx8mm-beacon-kit.dtb \
 	imx8mn-beacon-kit.dtb \
+	imx8mq-mnt-reform2.dtb \
 	imx8mq-phanbell.dtb \
 	imx8mp-evk.dtb \
 	imx8mp-phyboard-pollux-rdk.dtb \
arch/arm/dts/imx8mq-mnt-reform2.dts new file +164 -0

164 lines not on this page · raw message

arch/arm/dts/imx8mq-nitrogen-som.dtsi new file +275 -0

275 lines not on this page · raw message

Signature · 1 line
2.32.0
#2 lore raw

PATCH 2/2 board: mntre: imx8mq: Add MNT Reform 2 board support

In reply to Patrick Wildt

The MNT Reform 2 is a modular DIY laptop. In its initial version it is based on the BoundaryDevices i.MX8MQ SoM. Some parts have been lifted from BoundaryDevices official U-Boot downstream project.

---
 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi   |   11 +
 arch/arm/mach-imx/imx8m/Kconfig               |    6 +
 board/mntre/imx8mq_reform2/Kconfig            |   12 +
 board/mntre/imx8mq_reform2/MAINTAINERS        |    7 +
 board/mntre/imx8mq_reform2/Makefile           |   12 +
 board/mntre/imx8mq_reform2/imx8mq_reform2.c   |  215 ++++
 board/mntre/imx8mq_reform2/lpddr4_timing.c    | 1014 +++++++++++++++++
 .../mntre/imx8mq_reform2/lpddr4_timing_ch2.h  |   95 ++
 board/mntre/imx8mq_reform2/spl.c              |  260 +++++
 configs/imx8mq_reform2_defconfig              |   56 +
 include/configs/imx8mq_reform2.h              |  149 +++
 11 files changed, 1837 insertions(+)
 create mode 100644 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi
 create mode 100644 board/mntre/imx8mq_reform2/Kconfig
 create mode 100644 board/mntre/imx8mq_reform2/MAINTAINERS
 create mode 100644 board/mntre/imx8mq_reform2/Makefile
 create mode 100644 board/mntre/imx8mq_reform2/imx8mq_reform2.c
 create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing.c
 create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h
 create mode 100644 board/mntre/imx8mq_reform2/spl.c
 create mode 100644 configs/imx8mq_reform2_defconfig
 create mode 100644 include/configs/imx8mq_reform2.h
arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi new file +11 -0
new file mode 100644
index 0000000000..7e928e875b
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+&usdhc1 {
+	mmc-hs400-1_8v;
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
arch/arm/mach-imx/imx8m/Kconfig +6 -0
index 0669363c0f..623c852ae4 100644
@@ -44,6 +44,11 @@ config TARGET_IMX8MQ_PHANBELL
         select IMX8MQ
         select IMX8M_LPDDR4
 
+config TARGET_IMX8MQ_REFORM2
+	bool "imx8mq_reform2"
+	select IMX8MQ
+	select IMX8M_LPDDR4
+
 config TARGET_IMX8MM_EVK
 	bool "imx8mm LPDDR4 EVK board"
 	select BINMAN
@@ -149,6 +154,7 @@ source "board/freescale/imx8mn_evk/Kconfig"
 source "board/freescale/imx8mp_evk/Kconfig"
 source "board/gateworks/venice/Kconfig"
 source "board/google/imx8mq_phanbell/Kconfig"
+source "board/mntre/imx8mq_reform2/Kconfig"
 source "board/phytec/phycore_imx8mm/Kconfig"
 source "board/phytec/phycore_imx8mp/Kconfig"
 source "board/ronetix/imx8mq-cm/Kconfig"
board/mntre/imx8mq_reform2/Kconfig new file +12 -0
new file mode 100644
index 0000000000..8070ef377b
@@ -0,0 +1,12 @@
+if TARGET_IMX8MQ_REFORM2
+
+config SYS_BOARD
+	default "imx8mq_reform2"
+
+config SYS_VENDOR
+	default "mntre"
+
+config SYS_CONFIG_NAME
+	default "imx8mq_reform2"
+
+endif
board/mntre/imx8mq_reform2/MAINTAINERS new file +7 -0
new file mode 100644
index 0000000000..946f287ecf
@@ -0,0 +1,7 @@
+REFORM2 IMX8MQ BOARD
+M:	Lukas F. Hartmann <[email protected]>
+M:	Patrick Wildt <[email protected]>
+S:	Maintained
+F:	board/mntre/imx8mq_reform2/
+F:	include/configs/imx8mq_reform2.h
+F:	configs/imx8mq_reform2_defconfig
board/mntre/imx8mq_reform2/Makefile new file +12 -0
new file mode 100644
index 0000000000..2efd56bb4a
@@ -0,0 +1,12 @@
+#
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx8mq_reform2.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o
+endif
board/mntre/imx8mq_reform2/imx8mq_reform2.c new file +215 -0

215 lines not on this page · raw message

board/mntre/imx8mq_reform2/lpddr4_timing.c new file +1014 -0

1,014 lines not on this page · raw message

board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h new file +95 -0

95 lines not on this page · raw message

board/mntre/imx8mq_reform2/spl.c new file +260 -0

260 lines not on this page · raw message

configs/imx8mq_reform2_defconfig new file +56 -0

56 lines not on this page · raw message

include/configs/imx8mq_reform2.h new file +149 -0

149 lines not on this page · raw message

Signature · 1 line
2.32.0