staging: rtl8192e: remove condition with no effect
PATCH 1/1 staging: rtl8192e: remove condition with no effect
Remove the if and else code section for variable pHTInfo->bRegBW40MHz. Just before the if condition variable is assign with value 1. So if condition check for pHTInfo->bRegBW40MHz is always true.
Similarly for the variable pHTInfo->SelfMimoPs value '3' is assign. So if condition check with value '2' will never be true. Remove the if condition check for pHTInfo->SelfMimoPs.
Remove the extra blank lines from HTUpdateDefaultSetting function.
--- drivers/staging/rtl8192e/rtl819x_HTProc.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-)
drivers/staging/rtl8192e/rtl819x_HTProc.c +1 -15
@@ -72,34 +72,20 @@ void HTUpdateDefaultSetting(struct rtllib_device *ieee)struct rt_hi_throughput *pHTInfo = ieee->pHTInfo; pHTInfo->bAcceptAddbaReq =1 ; - pHTInfo->bRegShortGI20MHz =1 ; pHTInfo->bRegShortGI40MHz =1 ; - pHTInfo->bRegBW40MHz =1 ; - -if (pHTInfo->bRegBW40MHz) - pHTInfo->bRegSuppCCK =1 ; -else - pHTInfo->bRegSuppCCK = true; - + pHTInfo->bRegSuppCCK =1 ; pHTInfo->nAMSDU_MaxSize =7935UL ; pHTInfo->bAMSDU_Support =0 ; - pHTInfo->bAMPDUEnable =1 ; pHTInfo->AMPDU_Factor =2 ; pHTInfo->MPDU_Density =0 ; - pHTInfo->SelfMimoPs =3 ; -if (pHTInfo->SelfMimoPs ==2 ) - pHTInfo->SelfMimoPs =3 ; ieee->bTxDisableRateFallBack =0 ; ieee->bTxUseDriverAssingedRate =0 ; - ieee->bTxEnableFwCalcDur =1 ; - pHTInfo->bRegRT2RTAggregation =1 ; - pHTInfo->bRegRxReorderEnable =1 ; pHTInfo->RxReorderWinSize =64 ; pHTInfo->RxReorderPendingTime =30 ;
--
2.33.0
Greg KH
maintainerQuoted 56 lines · Saurav Girepunje
Remove the if and else code section for variable
pHTInfo->bRegBW40MHz. Just before the if condition variable is assign with value 1. So if condition check forpHTInfo->bRegBW40MHzis always true.Similarly for the variable
pHTInfo->SelfMimoPsvalue '3' is assign. So if condition check with value '2' will never be true. Remove the if condition check forpHTInfo->SelfMimoPs.Remove the extra blank lines from HTUpdateDefaultSetting function.
Signed-off-by Saurav Girepunje <[email protected]>--- drivers/staging/rtl8192e/rtl819x_HTProc.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-)drivers/staging/rtl8192e/rtl819x_HTProc.c +1
-16@@ -72,34 +72,20 @@ void HTUpdateDefaultSetting(struct rtllib_device *ieee)struct rt_hi_throughput *pHTInfo = ieee->pHTInfo; pHTInfo->bAcceptAddbaReq =1 ; - pHTInfo->bRegShortGI20MHz =1 ; pHTInfo->bRegShortGI40MHz =1 ; - pHTInfo->bRegBW40MHz =1 ; - -if (pHTInfo->bRegBW40MHz) - pHTInfo->bRegSuppCCK =1 ; -else - pHTInfo->bRegSuppCCK = true; - + pHTInfo->bRegSuppCCK =1 ; pHTInfo->nAMSDU_MaxSize =7935UL ; pHTInfo->bAMSDU_Support =0 ; - pHTInfo->bAMPDUEnable =1 ; pHTInfo->AMPDU_Factor =2 ; pHTInfo->MPDU_Density =0 ; - pHTInfo->SelfMimoPs =3 ; -if (pHTInfo->SelfMimoPs ==2 ) - pHTInfo->SelfMimoPs =3 ; ieee->bTxDisableRateFallBack =0 ; ieee->bTxUseDriverAssingedRate =0 ; - ieee->bTxEnableFwCalcDur =1 ; - pHTInfo->bRegRT2RTAggregation =1 ; - pHTInfo->bRegRxReorderEnable =1 ; pHTInfo->RxReorderWinSize =64 ; pHTInfo->RxReorderPendingTime =30 ; --
Quoted 3 lines
2.33.0
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- Your patch did many different things all at once, making it difficult to review. All Linux kernel patches need to only do one thing at a time. If you need to do multiple things (such as clean up all coding style issues in a file/driver), do it in a sequence of patches, each one doing only one thing. This will make it easier to review the patches to ensure that they are correct, and to help alleviate any merge issues that larger patches can cause.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot
Quoted 82 lines · Greg KH
Quoted 56 lines · Saurav Girepunje
Remove the if and else code section for variable
pHTInfo->bRegBW40MHz. Just before the if condition variable is assign with value 1. So if condition check forpHTInfo->bRegBW40MHzis always true.Similarly for the variable
pHTInfo->SelfMimoPsvalue '3' is assign. So if condition check with value '2' will never be true. Remove the if condition check forpHTInfo->SelfMimoPs.Remove the extra blank lines from HTUpdateDefaultSetting function.
Signed-off-by Saurav Girepunje <[email protected]>--- drivers/staging/rtl8192e/rtl819x_HTProc.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-)drivers/staging/rtl8192e/rtl819x_HTProc.c +1
-16@@ -72,34 +72,20 @@ void HTUpdateDefaultSetting(struct rtllib_device *ieee)struct rt_hi_throughput *pHTInfo = ieee->pHTInfo; pHTInfo->bAcceptAddbaReq =1 ; - pHTInfo->bRegShortGI20MHz =1 ; pHTInfo->bRegShortGI40MHz =1 ; - pHTInfo->bRegBW40MHz =1 ; - -if (pHTInfo->bRegBW40MHz) - pHTInfo->bRegSuppCCK =1 ; -else - pHTInfo->bRegSuppCCK = true; - + pHTInfo->bRegSuppCCK =1 ; pHTInfo->nAMSDU_MaxSize =7935UL ; pHTInfo->bAMSDU_Support =0 ; - pHTInfo->bAMPDUEnable =1 ; pHTInfo->AMPDU_Factor =2 ; pHTInfo->MPDU_Density =0 ; - pHTInfo->SelfMimoPs =3 ; -if (pHTInfo->SelfMimoPs ==2 ) - pHTInfo->SelfMimoPs =3 ; ieee->bTxDisableRateFallBack =0 ; ieee->bTxUseDriverAssingedRate =0 ; - ieee->bTxEnableFwCalcDur =1 ; - pHTInfo->bRegRT2RTAggregation =1 ; - pHTInfo->bRegRxReorderEnable =1 ; pHTInfo->RxReorderWinSize =64 ; pHTInfo->RxReorderPendingTime =30 ; --Quoted 3 lines
2.33.0
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- Your patch did many different things all at once, making it difficult to review. All Linux kernel patches need to only do one thing at a time. If you need to do multiple things (such as clean up all coding style issues in a file/driver), do it in a sequence of patches, each one doing only one thing. This will make it easier to review the patches to ensure that they are correct, and to help alleviate any merge issues that larger patches can cause.
Quoted 9 lines
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot
I will break this in multiple patch , One thing at a time.
Regards,
Saurav