Skip to contentSkip to conversation

PCI: Add func1 DMA quirk for Marvell 88SE9125 SATA controller

PATCH RESEND In review Yifeng Li 2 participants 2 messages Dec 2, 2021 – Dec 15, 2021 PCI

lore
Share & tools
lore

Yifeng Li

author
#0 lore raw

PATCH RESEND v3 1/1 PCI: Add func1 DMA quirk for Marvell 88SE9125 SATA controller

Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. This patch adds its device ID 0x9125 to the Function 1 DMA alias quirk list.

This patch should not be confused with an earlier patch, commit 059983790a4c ("PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller"), which applies to a different chip with a similar model number, 88SE9215.

Without this patch, device initialization fails with DMA errors.

ata8: softreset failed (1st FIS failed)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized.

    ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
    ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
    ata8.00: configured for UDMA/100
    scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5

---

Notes:
v3: Use full names in Reported-by and Tested-by tags.

v2: I accidentally sent an earlier version of the commit without CCing [email protected]. The mail itself was also rejected by many servers due to a DKIM issue. Thus [PATCH v2], sorry for the noise.

 drivers/pci/quirks.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/pci/quirks.c +3 -0
index 003950c73..20a932690 100644
@@ -4103,6 +4103,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120,
 			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
 			 quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
 			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
Signature · 1 line
2.31.1
#1 lore raw
Quoted 24 lines · Yifeng Li

Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. This patch adds its device ID 0x9125 to the Function 1 DMA alias quirk list.

This patch should not be confused with an earlier patch, commit 059983790a4c ("PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller"), which applies to a different chip with a similar model number, 88SE9215.

Without this patch, device initialization fails with DMA errors.

ata8: softreset failed (1st FIS failed)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized.

    ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
    ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
    ata8.00: configured for UDMA/100
    scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5
Quoted 6 lines

I tweaked the subject line to match similar previous commits and applied to pci/virtualization for v5.17, thanks!

e44537588288 ("PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller") 059983790a4c ("PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller") 9cde402a5977 ("PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller") 7695e73f3db4 ("PCI: Add function 1 DMA alias quirk for Marvell 88SS9183") 1903be8222b7 ("PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L") 832e4e1f76b8 ("PCI: Add function 1 DMA alias quirk for Marvell 88SE9220") aa0082066343 ("PCI: Add function 1 DMA alias quirk for Marvell 9128") 00456b35a527 ("PCI: Add function 1 DMA alias quirk for Marvell 88SE9182")

Quoted 29 lines

---

Notes:
v3: Use full names in Reported-by and Tested-by tags.

v2: I accidentally sent an earlier version of the commit without CCing [email protected]. The mail itself was also rejected by many servers due to a DKIM issue. Thus [PATCH v2], sorry for the noise.

 drivers/pci/quirks.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/pci/quirks.c +3 -0
index 003950c73..20a932690 100644
@@ -4103,6 +4103,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120,
 			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
 			 quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
 			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
Signature · 1 line
2.31.1