Skip to contentSkip to conversation

ovm6211 linux driver

DISCUSSION Petko Manolov 3 participants 5 messages Dec 3, 2021 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi guys,

On request by certain company we've developed a media driver for OmniVision's ovm6211 camera sensor. We just got permission to mainline the code. How shall i proceed?

cheers,
Petko

#1 lore raw

Hi Petko,

Quoted 10 lines · Petko Manolov

Hi guys,

On request by certain company we've developed a media driver for OmniVision's ovm6211 camera sensor. We just got permission to mainline the code. How shall i proceed?

cheers,
Petko

You found the correct mailinglist, so that's good :-)

This is a good starting page:

https://www.linuxtv.org/wiki/index.php/Developer_section

Check the 'Kernel driver development' - 'Submitting Your Work:' links.

Regards,

Hans

#2 lore raw
Quoted 18 lines · Hans Verkuil

Hi Petko,

Quoted 10 lines · Petko Manolov

Hi guys,

On request by certain company we've developed a media driver for OmniVision's ovm6211 camera sensor. We just got permission to mainline the code. How shall i proceed?

cheers,
Petko

You found the correct mailinglist, so that's good :-)

This is a good starting page:

Quoted 8 lines

https://www.linuxtv.org/wiki/index.php/Developer_section

Check the 'Kernel driver development' - 'Submitting Your Work:' links.

Regards,

Hans

Actually, this is a better source (for the media-subsystem-specific stuff):

https://www.kernel.org/doc/html/latest/driver-api/media/maintainer-entry-profile.html

together with this (general kernel development):

https://www.kernel.org/doc/html/latest/process/index.html

Regards,

Hans

#3 lore raw
Quoted 22 lines · Hans Verkuil
Quoted 21 lines · Hans Verkuil

Hi Petko,

Quoted 9 lines · Petko Manolov

Hi guys,

On request by certain company we've developed a media driver for OmniVision's ovm6211 camera sensor. We just got permission to mainline the code. How shall i proceed?

cheers, Petko

You found the correct mailinglist, so that's good :-)

This is a good starting page:

https://www.linuxtv.org/wiki/index.php/Developer_section

Check the 'Kernel driver development' - 'Submitting Your Work:' links.

Quoted 8 lines
Quoted 4 lines

Regards,

Hans

Actually, this is a better source (for the media-subsystem-specific stuff):

https://www.kernel.org/doc/html/latest/driver-api/media/maintainer-entry-profile.html

Thanks for the pointers. Perhaps i should have mentioned that i am already maintaining several kernel drivers. This is my first 'media' driver and my question was more in the lines of how you guys are doing it, although i did not vocalize it explicitly. I assume the above link will give me the bits i still don't know about.

I'll send the v0 patch shortly.

thanks,
Petko

#4 lore raw
In reply to Petko Manolov

From: "Petko Manolov" <[email protected]>

Quoted 3 lines

On request by certain company we've developed a media driver for OmniVision's ovm6211 camera sensor. We just got permission to mainline the code. How shall i proceed?

Hi Petko, the Linux kernel documentation has all the information you need:

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/Documentation/process/submitting-patches.rst

Best Regards,
-Robert