sunxi:dts: remove r40 can node
Subsystems (2)
PATCH 1/1 sunxi:dts: remove r40 can node
it does not have can in r40/a40i/t3.so delete it.
--- arch/arm/boot/dts/sun8i-r40.dtsi | 9 --------- 1 file changed, 9 deletions(-)
arch/arm/boot/dts/sun8i-r40.dtsi +0 -9
@@ -936,15 +936,6 @@ i2c3: i2c@1c2b800 { #size-cells = <0>; }; - can0: can@1c2bc00 { - compatible = "allwinner,sun8i-r40-can"; - reg = <0x01c2bc00 0x400>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_CAN>; - resets = <&ccu RST_BUS_CAN>; - status = "disabled"; - }; - i2c4: i2c@1c2c000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2c000 0x400>;
Signature · 5 lines
2.32.0 -- Technology is exciting
Hi,
as I explained in the original commit message, CAN is definitely there and is working perfectly at least on A40i. I know it was removed from the user manual, but I personally verified that it is working.
Maybe you can tell why CAN should be removed besides not being described in the manual? Are there some hardware or maybe license issues?
Thanks!
--
Best wishes,
Evgeny Boger
CTO @ wirenboard.com
Quoted 6 lines · Evgeny Boger
Hi,
as I explained in the original commit message, CAN is definitely there and is working perfectly at least on A40i.
I know it was removed from the user manual, but I personally verified that it is working.
sorry, I forgot read the commit msg;
Quoted 3 lines
Maybe you can tell why CAN should be removed besides not being described in the manual? Are there some hardware or maybe license issues?
i will test it again.
thanks!
Quoted 11 lines
Thanks!
--
Best wishes,
Evgeny Boger
CTO @ wirenboard.com
Signature · 7 lines
Technology is exciting _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel