KASAN support for 64-bit Book 3S powerpc
Subsystems (6)
cover KASAN support for 64-bit Book 3S powerpc
This patch series implements KASAN on 64-bit POWER with radix MMU, such as POWER9 or POWER10. Daniel Axtens posted previous versions of these patches, but is no longer working on KASAN, and I have been asked to get them ready for inclusion.
Because of various technical difficulties, mostly around the need to allow for code that runs in real mode, we only support "outline" mode (as opposed to "inline" mode), where the compiler adds a call to a checking procedure before every store to memory.
The main patch is still marked [RFC] because of known deficiencies, specifically that the kernel will crash on boot on a HPT system, and that out-of-bounds accesses to module global data are not caught (which leads to one of the KASAN tests failing).
Comments welcome. I may not have addressed all the comments about previous versions of these patches; if so, then please just repeat your comments.
Paul.
Documentation/dev-tools/kasan.rst | 7 +-
Documentation/powerpc/kasan.txt | 58 ++++++++++++
arch/powerpc/Kconfig | 5 +-
arch/powerpc/Kconfig.debug | 3 +-
arch/powerpc/include/asm/book3s/64/hash.h | 4 +
arch/powerpc/include/asm/book3s/64/pgtable.h | 3 +
arch/powerpc/include/asm/book3s/64/radix.h | 13 ++-
arch/powerpc/include/asm/interrupt.h | 52 ++++++++---
arch/powerpc/include/asm/kasan.h | 22 +++++
arch/powerpc/include/asm/ptrace.h | 6 --
arch/powerpc/kernel/Makefile | 11 +++
arch/powerpc/kernel/process.c | 16 ++--
arch/powerpc/kernel/smp.c | 22 ++---
arch/powerpc/kernel/traps.c | 6 +-
arch/powerpc/kexec/Makefile | 2 +
arch/powerpc/kvm/Makefile | 5 +
arch/powerpc/lib/Makefile | 3 +
arch/powerpc/mm/book3s64/Makefile | 9 ++
arch/powerpc/mm/kasan/Makefile | 3 +-
.../mm/kasan/{kasan_init_32.c => init_32.c} | 0
arch/powerpc/mm/kasan/init_book3s_64.c | 103 +++++++++++++++++++++
arch/powerpc/mm/ptdump/ptdump.c | 3 +-
arch/powerpc/platforms/Kconfig.cputype | 1 +
arch/powerpc/platforms/powernv/Makefile | 8 ++
arch/powerpc/platforms/powernv/smp.c | 2 +-
arch/powerpc/platforms/pseries/Makefile | 6 ++
arch/powerpc/sysdev/xics/xics-common.c | 4 +-
arch/powerpc/sysdev/xive/common.c | 4 +-
28 files changed, 330 insertions(+), 51 deletions(-)PATCH 1/3 kasan: Document support on 32-bit powerpc
From: Daniel Axtens <[email protected]>
KASAN is supported on 32-bit powerpc and the docs should reflect this.
--- Documentation/dev-tools/kasan.rst | 8 ++++++-- Documentation/powerpc/kasan.txt | 12 ++++++++++++ 2 files changed, 18 insertions(+), 2 deletions(-) create mode 100644 Documentation/powerpc/kasan.txt
Documentation/dev-tools/kasan.rst +6 -2
@@ -36,7 +36,8 @@ Both software KASAN modes work with SLUB and SLAB memory allocators, while the hardware tag-based KASAN currently only supports SLUB. Currently, generic KASAN is supported for the x86_64, arm, arm64, xtensa, s390, -and riscv architectures, and tag-based KASAN modes are supported only for arm64. +and riscv architectures. It is also supported on 32-bit powerpc kernels. +Tag-based KASAN modes are supported only for arm64. Usage -----
@@ -349,7 +350,10 @@ CONFIG_KASAN_VMALLOC With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the cost of greater memory usage. Currently, this is supported on x86, -riscv, s390, and powerpc. +riscv, s390, and 32-bit powerpc. + +It is optional, except on 32-bit powerpc kernels with module support, +where it is required. This works by hooking into vmalloc and vmap and dynamically allocating real shadow memory to back the mappings.
Documentation/powerpc/kasan.txt new file +12 -0
@@ -0,0 +1,12 @@ +KASAN is supported on powerpc on 32-bit only. + +32 bit support +============== + +KASAN is supported on both hash and nohash MMUs on 32-bit. + +The shadow area sits at the top of the kernel virtual memory space above the +fixmap area and occupies one eighth of the total kernel virtual memory space. + +Instrumentation of the vmalloc area is optional, unless built with modules, +in which case it is required.
Signature · 1 line
2.35.3
PATCH 2/3 powerpc/mm/kasan: rename kasan_init_32.c to init_32.c
In reply to Paul MackerrasFrom: Daniel Axtens <[email protected]>
kasan is already implied by the directory name, we don't need to repeat it.
---
arch/powerpc/mm/kasan/Makefile | 2 +-
arch/powerpc/mm/kasan/{kasan_init_32.c => init_32.c} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/powerpc/mm/kasan/{kasan_init_32.c => init_32.c} (100%)arch/powerpc/mm/kasan/Makefile +1 -1
@@ -2,6 +2,6 @@ KASAN_SANITIZE := n -obj-$(CONFIG_PPC32) += kasan_init_32.o +obj-$(CONFIG_PPC32) += init_32.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_BOOK3S_32) += book3s_32.o
arch/powerpc/mm/kasan/init_32.c renamed from arch/powerpc/mm/kasan/kasan_init_32.c +0 -0
Signature · 1 line
2.35.3
RFC PATCH 3/3 powerpc: Book3S 64-bit outline-only KASAN support
In reply to Paul MackerrasFrom: Daniel Axtens <[email protected]>
Implement a limited form of KASAN for Book3S 64-bit machines running under the Radix MMU, supporting only outline mode.
- Enable the compiler instrumentation to check addresses and maintain the shadow region. (This is the guts of KASAN which we can easily reuse.)
- Require kasan-vmalloc support to handle modules and anything else in vmalloc space.
- KASAN needs to be able to validate all pointer accesses, but we can't instrument all kernel addresses - only linear map and vmalloc. On boot, set up a single page of read-only shadow that marks all iomap and vmemmap accesses as valid.
- Document KASAN in both generic and powerpc docs.
Background
----------
KASAN support on Book3S is a bit tricky to get right:
- It would be good to support inline instrumentation so as to be able to catch stack issues that cannot be caught with outline mode.
- Inline instrumentation requires a fixed offset.
- Book3S runs code with translations off ("real mode") during boot, including a lot of generic device-tree parsing code which is used to determine MMU features.
[ppc64 mm note: The kernel installs a linear mapping at effective address c000...-c008.... This is a one-to-one mapping with physical memory from 0000... onward. Because of how memory accesses work on powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the same memory both with translations on (accessing as an 'effective address'), and with translations off (accessing as a 'real address'). This works in both guests and the hypervisor. For more details, see s5.7 of Book III of version 3 of the ISA, in particular the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this KASAN implementation currently only supports Radix.]
- Some code - most notably a lot of KVM code - also runs with translations off after boot.
- Therefore any offset has to point to memory that is valid with translations on or off.
One approach is just to give up on inline instrumentation. This way boot-time checks can be delayed until after the MMU is set is up, and we can just not instrument any code that runs with translations off after booting. Take this approach for now and require outline instrumentation.
Previous attempts allowed inline instrumentation. However, they came with some unfortunate restrictions: only physically contiguous memory could be used and it had to be specified at compile time. Maybe we can do better in the future.
[[email protected] - Rebased onto 5.17. Still RFC because:
(a) A kernel with CONFIG_KASAN=y will crash during boot on a machine using HPT translation because not all the entry points to the generic KASAN code are protected with a call to kasan_arch_is_ready() -- at least __kasan_kfree_large() and __kasan_check_byte() need such a guard, and probably others. Previous versions of this code had a panic() call in kasan_init() to prevent a KASAN-enabled kernel from booting on a HPT machine, but unfortunately the panic string doesn't actually get printed to the console, because kasan_init gets called very early.
(b) Of the KASAN tests included in the kernel source, all the relevant ones pass except for the "global_oob_right" test, and it only fails when CONFIG_KASAN_KUNIT_TEST=m; it passes when the kunit tests are built in. That is, KASAN is not detecting out-of-bounds accesses to module-global data.
]
--- Documentation/dev-tools/kasan.rst | 11 +- Documentation/powerpc/kasan.txt | 48 ++++++++- arch/powerpc/Kconfig | 5 +- arch/powerpc/Kconfig.debug | 3 +- arch/powerpc/include/asm/book3s/64/hash.h | 4 + arch/powerpc/include/asm/book3s/64/pgtable.h | 3 + arch/powerpc/include/asm/book3s/64/radix.h | 13 ++- arch/powerpc/include/asm/interrupt.h | 52 +++++++--- arch/powerpc/include/asm/kasan.h | 22 ++++ arch/powerpc/include/asm/ptrace.h | 6 -- arch/powerpc/kernel/Makefile | 11 ++ arch/powerpc/kernel/process.c | 16 +-- arch/powerpc/kernel/smp.c | 22 ++-- arch/powerpc/kernel/traps.c | 6 +- arch/powerpc/kexec/Makefile | 2 + arch/powerpc/kvm/Makefile | 5 + arch/powerpc/lib/Makefile | 3 + arch/powerpc/mm/book3s64/Makefile | 9 ++ arch/powerpc/mm/kasan/Makefile | 1 + arch/powerpc/mm/kasan/init_book3s_64.c | 103 +++++++++++++++++++ arch/powerpc/mm/ptdump/ptdump.c | 3 +- arch/powerpc/platforms/Kconfig.cputype | 1 + arch/powerpc/platforms/powernv/Makefile | 8 ++ arch/powerpc/platforms/powernv/smp.c | 2 +- arch/powerpc/platforms/pseries/Makefile | 6 ++ arch/powerpc/sysdev/xics/xics-common.c | 4 +- arch/powerpc/sysdev/xive/common.c | 4 +- 27 files changed, 318 insertions(+), 55 deletions(-) create mode 100644 arch/powerpc/mm/kasan/init_book3s_64.c
Documentation/dev-tools/kasan.rst +6 -5
@@ -36,8 +36,9 @@ Both software KASAN modes work with SLUB and SLAB memory allocators, while the hardware tag-based KASAN currently only supports SLUB. Currently, generic KASAN is supported for the x86_64, arm, arm64, xtensa, s390, -and riscv architectures. It is also supported on 32-bit powerpc kernels. -Tag-based KASAN modes are supported only for arm64. +and riscv architectures. It is also supported on powerpc for 32-bit kernels and +for 64-bit kernels running under the Radix MMU. Tag-based KASAN modes are +supported only for arm64. Usage -----
@@ -350,10 +351,10 @@ CONFIG_KASAN_VMALLOC With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the cost of greater memory usage. Currently, this is supported on x86, -riscv, s390, and 32-bit powerpc. +riscv, s390, and powerpc. -It is optional, except on 32-bit powerpc kernels with module support, -where it is required. +It is optional, except on 64-bit powerpc kernels, and on 32-bit +powerpc kernels with module support, where it is required. This works by hooking into vmalloc and vmap and dynamically allocating real shadow memory to back the mappings.
Documentation/powerpc/kasan.txt +47 -1
54 lines not on this page · raw message
arch/powerpc/Kconfig +4 -1
@@ -105,6 +105,7 @@ config PPC # Please keep this list sorted alphabetically. # select ARCH_32BIT_OFF_T if PPC32 + select ARCH_DISABLE_KASAN_INLINE if PPC_RADIX_MMU select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVE select ARCH_HAS_COPY_MC if PPC64
@@ -152,6 +153,7 @@ config PPC select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_IRQS_OFF_ACTIVATE_MM select ARCH_WANT_LD_ORPHAN_WARN + select ARCH_WANTS_NO_INSTR select ARCH_WEAK_RELEASE_ACQUIRE select BINFMT_ELF select BUILDTIME_TABLE_SORT
@@ -183,7 +185,8 @@ config PPC select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_JUMP_LABEL_RELATIVE select HAVE_ARCH_KASAN if PPC32 && PPC_PAGE_SHIFT <= 14 - select HAVE_ARCH_KASAN_VMALLOC if PPC32 && PPC_PAGE_SHIFT <= 14 + select HAVE_ARCH_KASAN if PPC_RADIX_MMU + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN select HAVE_ARCH_KFENCE if PPC_BOOK3S_32 || PPC_8xx || 40x select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS
arch/powerpc/Kconfig.debug +2 -1
@@ -374,4 +374,5 @@ config PPC_FAST_ENDIAN_SWITCH config KASAN_SHADOW_OFFSET hex depends on KASAN - default 0xe0000000 + default 0xe0000000 if PPC32 + default 0xa80e000000000000 if PPC64
arch/powerpc/include/asm/book3s/64/hash.h +4 -0
@@ -18,6 +18,10 @@#include <asm/book3s/64/hash-4k.h> #endif +#define H_PTRS_PER_PTE (1 << H_PTE_INDEX_SIZE) +#define H_PTRS_PER_PMD (1 << H_PMD_INDEX_SIZE) +#define H_PTRS_PER_PUD (1 << H_PUD_INDEX_SIZE) +/* Bits to set in a PMD/PUD/PGD entry valid bit*/ #define HASH_PMD_VAL_BITS (0x8000000000000000UL)#define HASH_PUD_VAL_BITS (0x8000000000000000UL)
arch/powerpc/include/asm/book3s/64/pgtable.h +3 -0
@@ -232,6 +232,9 @@ extern unsigned long __pmd_frag_size_shift;#define PTRS_PER_PUD (1 << PUD_INDEX_SIZE)#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) +#define MAX_PTRS_PER_PTE ((H_PTRS_PER_PTE > R_PTRS_PER_PTE) ? H_PTRS_PER_PTE : R_PTRS_PER_PTE) +#define MAX_PTRS_PER_PMD ((H_PTRS_PER_PMD > R_PTRS_PER_PMD) ? H_PTRS_PER_PMD : R_PTRS_PER_PMD) +#define MAX_PTRS_PER_PUD ((H_PTRS_PER_PUD > R_PTRS_PER_PUD) ? H_PTRS_PER_PUD : R_PTRS_PER_PUD)#define MAX_PTRS_PER_PGD (1 << (H_PGD_INDEX_SIZE > RADIX_PGD_INDEX_SIZE ? \ H_PGD_INDEX_SIZE : RADIX_PGD_INDEX_SIZE))
arch/powerpc/include/asm/book3s/64/radix.h +10 -3
@@ -35,6 +35,11 @@#define RADIX_PMD_SHIFT (PAGE_SHIFT + RADIX_PTE_INDEX_SIZE)#define RADIX_PUD_SHIFT (RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE)#define RADIX_PGD_SHIFT (RADIX_PUD_SHIFT + RADIX_PUD_INDEX_SIZE) + +#define R_PTRS_PER_PTE (1 << RADIX_PTE_INDEX_SIZE) +#define R_PTRS_PER_PMD (1 << RADIX_PMD_INDEX_SIZE) +#define R_PTRS_PER_PUD (1 << RADIX_PUD_INDEX_SIZE) +/* * Size of EA range mapped by our pagetables. */
@@ -68,11 +73,11 @@* * * 3rd quadrant expanded: -* +------------------------------+ +* +------------------------------+ Highest address (0xc010000000000000) +* +------------------------------+ KASAN shadow end (0xc00fc00000000000) * | | * | | -* | | -* +------------------------------+ Kernel vmemmap end (0xc010000000000000) +* +------------------------------+ Kernel vmemmap end/shadow start (0xc00e000000000000) * | | * | 512TB | * | |
@@ -126,6 +131,8 @@#define RADIX_VMEMMAP_SIZE RADIX_KERN_MAP_SIZE#define RADIX_VMEMMAP_END (RADIX_VMEMMAP_START + RADIX_VMEMMAP_SIZE) +/* For the sizes of the shadow area, see kasan.h */ +#ifndef __ASSEMBLY__#define RADIX_PTE_TABLE_SIZE (sizeof(pte_t) << RADIX_PTE_INDEX_SIZE)#define RADIX_PMD_TABLE_SIZE (sizeof(pmd_t) << RADIX_PMD_INDEX_SIZE)
arch/powerpc/include/asm/interrupt.h +40 -12
90 lines not on this page · raw message
arch/powerpc/include/asm/kasan.h +22 -0
@@ -30,9 +30,31 @@#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET) +#ifdef CONFIG_PPC32 #define KASAN_SHADOW_END (-(-KASAN_SHADOW_START >> KASAN_SHADOW_SCALE_SHIFT)) +#endif #ifdef CONFIG_KASAN +#ifdef CONFIG_PPC_BOOK3S_64 +/* +* The shadow ends before the highest accessible address +* because we don't need a shadow for the shadow. Instead: +* c00e000000000000 << 3 + a80e000000000000 = c00fc00000000000 +*/ +#define KASAN_SHADOW_END 0xc00fc00000000000UL + +DECLARE_STATIC_KEY_FALSE (powerpc_kasan_enabled_key); + +static __always_inline bool kasan_arch_is_ready(void) +{ +if (static_branch_likely (&powerpc_kasan_enabled_key)) +return true; +return false; +} + +#define kasan_arch_is_ready kasan_arch_is_ready +#endif +void kasan_early_init (void );void kasan_mmu_init (void );void kasan_init (void );
arch/powerpc/include/asm/ptrace.h +0 -6
@@ -305,12 +305,6 @@ static inline void regs_set_recoverable(struct pt_regs *regs)regs_set_return_msr (regs, regs->msr |MSR_RI ); } -static inline void regs_set_unrecoverable (struct pt_regs *regs) -{ -if (cpu_has_msr_ri ()) -regs_set_return_msr (regs, regs->msr & ~MSR_RI ); -} -#define arch_has_single_step () (1)#define arch_has_block_step () (true)#define ARCH_HAS_USER_SINGLE_STEP_REPORT
arch/powerpc/kernel/Makefile +11 -0
@@ -33,6 +33,17 @@ KASAN_SANITIZE_early_32.o := n KASAN_SANITIZE_cputable.o := n KASAN_SANITIZE_prom_init.o := n KASAN_SANITIZE_btext.o := n +KASAN_SANITIZE_paca.o := n +KASAN_SANITIZE_setup_64.o := n +KASAN_SANITIZE_mce.o := n +KASAN_SANITIZE_mce_power.o := n + +# we have to be particularly careful in ppc64 to exclude code that +# runs with translations off, as we cannot access the shadow with +# translations off. However, ppc32 can sanitize this. +ifdef CONFIG_PPC64 +KASAN_SANITIZE_traps.o := n +endif ifdef CONFIG_KASAN CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILING
arch/powerpc/kernel/process.c +9 -7
@@ -2220,8 +2220,8 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,break ; stack = (unsigned long *) sp; - newsp = stack[0 ]; - ip = stack[STACK_FRAME_LR_SAVE ]; + newsp =READ_ONCE_NOCHECK (stack[0 ]); + ip =READ_ONCE_NOCHECK (stack[STACK_FRAME_LR_SAVE ]);if (!firstframe || ip != lr) {printk ("%s[" REG "] [" REG "] %pS" , loglvl, sp, ip, (void *)ip);
@@ -2239,17 +2239,19 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,* See if this is an exception frame. * We look for the "regshere" marker in the current frame. */ -if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) - && stack[STACK_FRAME_MARKER ] ==STACK_FRAME_REGS_MARKER ) { +if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) && + (READ_ONCE_NOCHECK (stack[STACK_FRAME_MARKER ]) == +STACK_FRAME_REGS_MARKER )) {struct pt_regs *regs = (struct pt_regs *) (sp +STACK_FRAME_OVERHEAD ); - lr = regs->link; + lr =READ_ONCE_NOCHECK (regs->link);printk ("%s--- interrupt: %lx at %pS\n" , - loglvl, regs->trap, (void *)regs->nip); + loglvl,READ_ONCE_NOCHECK (regs->trap), + (void *)READ_ONCE_NOCHECK (regs->nip));__show_regs (regs);printk ("%s--- interrupt: %lx\n" , - loglvl, regs->trap); + loglvl,READ_ONCE_NOCHECK (regs->trap)); firstframe =1 ; }
arch/powerpc/kernel/smp.c +11 -11
@@ -413,32 +413,32 @@ static struct cpumask nmi_ipi_pending_mask;static bool nmi_ipi_busy = false;static void (*nmi_ipi_function)(struct pt_regs *) =NULL ; -static void nmi_ipi_lock_start (unsigned long *flags) +noinstr static void nmi_ipi_lock_start(unsigned long *flags) {raw_local_irq_save (*flags);hard_irq_disable (); -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) { +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) {raw_local_irq_restore (*flags); -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 );raw_local_irq_save (*flags);hard_irq_disable (); } } -static void nmi_ipi_lock (void ) +noinstr static void nmi_ipi_lock(void) { -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 ); } -static void nmi_ipi_unlock (void ) +noinstr static void nmi_ipi_unlock(void) {smp_mb (); -WARN_ON (atomic_read (&__nmi_ipi_lock) !=1 ); -atomic_set (&__nmi_ipi_lock,0 ); +WARN_ON (arch_atomic_read (&__nmi_ipi_lock) !=1 ); +arch_atomic_set (&__nmi_ipi_lock,0 ); } -static void nmi_ipi_unlock_end (unsigned long *flags) +noinstr static void nmi_ipi_unlock_end(unsigned long *flags) {nmi_ipi_unlock ();raw_local_irq_restore (*flags);
@@ -447,7 +447,7 @@ static void nmi_ipi_unlock_end(unsigned long *flags)/* * Platform NMI handler calls this to ack */ -int smp_handle_nmi_ipi (struct pt_regs *regs) +noinstr int smp_handle_nmi_ipi(struct pt_regs *regs) {void (*fn)(struct pt_regs *) =NULL ;unsigned long flags;
arch/powerpc/kernel/traps.c +4 -2
@@ -393,7 +393,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)* Builds that do not support KVM could take this second option to increase * the recoverability of NMIs. */ -void hv_nmi_check_nonrecoverable (struct pt_regs *regs) +noinstr void hv_nmi_check_nonrecoverable(struct pt_regs *regs) {#ifdef CONFIG_PPC_POWERNV unsigned long kbase = (unsigned long )_stext;
@@ -433,7 +433,9 @@ void hv_nmi_check_nonrecoverable(struct pt_regs *regs)return ; nonrecoverable: -regs_set_unrecoverable (regs); + regs->msr &= ~MSR_RI ; + local_paca->hsrr_valid =0 ; + local_paca->srr_valid =0 ;#endif }DEFINE_INTERRUPT_HANDLER_NMI (system_reset_exception)
arch/powerpc/kexec/Makefile +2 -0
@@ -13,3 +13,5 @@ obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS) GCOV_PROFILE_core_$(BITS).o := n KCOV_INSTRUMENT_core_$(BITS).o := n UBSAN_SANITIZE_core_$(BITS).o := n +KASAN_SANITIZE_core.o := n +KASAN_SANITIZE_core_$(BITS) := n
arch/powerpc/kvm/Makefile +5 -0
@@ -134,3 +134,8 @@ obj-$(CONFIG_KVM_BOOK3S_64_PR) += kvm-pr.o obj-$(CONFIG_KVM_BOOK3S_64_HV) += kvm-hv.o obj-y += $(kvm-book3s_64-builtin-objs-y) + +# KVM does a lot in real-mode, and 64-bit Book3S KASAN doesn't support that +ifdef CONFIG_PPC_BOOK3S_64 +KASAN_SANITIZE := n +endif
arch/powerpc/lib/Makefile +3 -0
@@ -13,6 +13,9 @@ CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE) KASAN_SANITIZE_code-patching.o := n KASAN_SANITIZE_feature-fixups.o := n +# restart_table.o contains functions called in the NMI interrupt path +# which can be in real mode. Disable KASAN. +KASAN_SANITIZE_restart_table.o := n ifdef CONFIG_KASAN CFLAGS_code-patching.o += -DDISABLE_BRANCH_PROFILING
arch/powerpc/mm/book3s64/Makefile +9 -0
@@ -24,3 +24,12 @@ obj-$(CONFIG_PPC_PKEY) += pkeys.o # Instrumenting the SLB fault path can lead to duplicate SLB entries KCOV_INSTRUMENT_slb.o := n + +# Parts of these can run in real mode and therefore are +# not safe with the current outline KASAN implementation +KASAN_SANITIZE_mmu_context.o := n +KASAN_SANITIZE_pgtable.o := n +KASAN_SANITIZE_radix_pgtable.o := n +KASAN_SANITIZE_radix_tlb.o := n +KASAN_SANITIZE_slb.o := n +KASAN_SANITIZE_pkeys.o := n
arch/powerpc/mm/kasan/Makefile +1 -0
@@ -5,3 +5,4 @@ KASAN_SANITIZE := n obj-$(CONFIG_PPC32) += init_32.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_BOOK3S_32) += book3s_32.o +obj-$(CONFIG_PPC_BOOK3S_64) += init_book3s_64.o
arch/powerpc/mm/kasan/init_book3s_64.c new file +103 -0
103 lines not on this page · raw message
arch/powerpc/mm/ptdump/ptdump.c +2 -1
@@ -21,6 +21,7 @@#include <linux/seq_file.h> #include <asm/fixmap.h> #include <linux/const.h> +#include <linux/kasan.h> #include <asm/page.h> #include <asm/hugetlb.h>
@@ -289,11 +290,11 @@ static void populate_markers(void)#endif address_markers[i++].start_address =FIXADDR_START ; address_markers[i++].start_address =FIXADDR_TOP ; +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_KASAN address_markers[i++].start_address =KASAN_SHADOW_START ; address_markers[i++].start_address =KASAN_SHADOW_END ;#endif -#endif /* CONFIG_PPC64 */ }static int ptdump_show (struct seq_file *m,void *v)
arch/powerpc/platforms/Kconfig.cputype +1 -0
@@ -104,6 +104,7 @@ config PPC_BOOK3S_64 select HAVE_MOVE_PUD select IRQ_WORK select PPC_64S_HASH_MMU if !PPC_RADIX_MMU + select KASAN_VMALLOC if KASAN config PPC_BOOK3E_64 bool "Embedded processors"
arch/powerpc/platforms/powernv/Makefile +8 -0
@@ -1,4 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 + +# nothing that deals with real mode is safe to KASAN +# in particular, idle code runs a bunch of things in real mode +KASAN_SANITIZE_idle.o := n +KASAN_SANITIZE_pci-ioda.o := n +# pnv_machine_check_early +KASAN_SANITIZE_setup.o := n + obj-y += setup.o opal-call.o opal-wrappers.o opal.o opal-async.o obj-y += idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
arch/powerpc/platforms/powernv/smp.c +1 -1
@@ -345,7 +345,7 @@ static void __init pnv_smp_probe(void) } } -static int pnv_system_reset_exception (struct pt_regs *regs) +noinstr static int pnv_system_reset_exception(struct pt_regs *regs) {if (smp_handle_nmi_ipi (regs))return 1 ;
arch/powerpc/platforms/pseries/Makefile +6 -0
@@ -32,3 +32,9 @@ obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_PPC_VAS) += vas.o obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += cc_platform.o + +# nothing that operates in real mode is safe for KASAN +KASAN_SANITIZE_ras.o := n +KASAN_SANITIZE_kexec.o := n +#machine_kexec +KASAN_SANITIZE_setup.o := n
arch/powerpc/sysdev/xics/xics-common.c +2 -2
@@ -146,7 +146,7 @@ void __init xics_smp_probe(void)#endif /* CONFIG_SMP */ -void xics_teardown_cpu (void ) +noinstr void xics_teardown_cpu(void) {struct xics_cppr *os_cppr =this_cpu_ptr (&xics_cppr);
@@ -159,7 +159,7 @@ void xics_teardown_cpu(void) icp_ops->teardown_cpu (); } -void xics_kexec_teardown_cpu (int secondary) +noinstr void xics_kexec_teardown_cpu(int secondary) {xics_teardown_cpu ();
arch/powerpc/sysdev/xive/common.c +2 -2
@@ -1241,7 +1241,7 @@ static int xive_setup_cpu_ipi(unsigned int cpu)return 0 ; } -static void xive_cleanup_cpu_ipi (unsigned int cpu,struct xive_cpu *xc) +noinstr static void xive_cleanup_cpu_ipi(unsigned int cpu, struct xive_cpu *xc) {unsigned int xive_ipi_irq =xive_ipi_cpu_to_irq (cpu);
@@ -1634,7 +1634,7 @@ void xive_flush_interrupt(void)#endif /* CONFIG_SMP */ -void xive_teardown_cpu (void ) +noinstr void xive_teardown_cpu(void) {struct xive_cpu *xc =__this_cpu_read (xive_cpu);unsigned int cpu =smp_processor_id ();
Signature · 1 line
2.35.3
Re: [PATCH 3/3] [RFC] powerpc: Book3S 64-bit outline-only KASAN support
Le 11/05/2022 à 09:28, Paul Mackerras a écrit :
Quoted 215 lines
From: Daniel Axtens <[email protected]>
Implement a limited form of KASAN for Book3S 64-bit machines running under the Radix MMU, supporting only outline mode.
- Enable the compiler instrumentation to check addresses and maintain the shadow region. (This is the guts of KASAN which we can easily reuse.)
- Require kasan-vmalloc support to handle modules and anything else in vmalloc space.
- KASAN needs to be able to validate all pointer accesses, but we can't instrument all kernel addresses - only linear map and vmalloc. On boot, set up a single page of read-only shadow that marks all iomap and vmemmap accesses as valid.
- Document KASAN in both generic and powerpc docs.
Background
----------KASAN support on Book3S is a bit tricky to get right:
- It would be good to support inline instrumentation so as to be able to catch stack issues that cannot be caught with outline mode.
- Inline instrumentation requires a fixed offset.
- Book3S runs code with translations off ("real mode") during boot, including a lot of generic device-tree parsing code which is used to determine MMU features.
[ppc64 mm note: The kernel installs a linear mapping at effective address c000...-c008.... This is a one-to-one mapping with physical memory from 0000... onward. Because of how memory accesses work on powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the same memory both with translations on (accessing as an 'effective address'), and with translations off (accessing as a 'real address'). This works in both guests and the hypervisor. For more details, see s5.7 of Book III of version 3 of the ISA, in particular the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this KASAN implementation currently only supports Radix.]
- Some code - most notably a lot of KVM code - also runs with translations off after boot.
- Therefore any offset has to point to memory that is valid with translations on or off.
One approach is just to give up on inline instrumentation. This way boot-time checks can be delayed until after the MMU is set is up, and we can just not instrument any code that runs with translations off after booting. Take this approach for now and require outline instrumentation.
Previous attempts allowed inline instrumentation. However, they came with some unfortunate restrictions: only physically contiguous memory could be used and it had to be specified at compile time. Maybe we can do better in the future.
[[email protected] - Rebased onto 5.17. Still RFC because:
(a) A kernel with
CONFIG_KASAN=ywill crash during boot on a machine using HPT translation because not all the entry points to the generic KASAN code are protected with a call tokasan_arch_is_ready()-- at least__kasan_kfree_large()and__kasan_check_byte()need such a guard, and probably others. Previous versions of this code had apanic()call inkasan_init()to prevent a KASAN-enabled kernel from booting on a HPT machine, but unfortunately the panic string doesn't actually get printed to the console, becausekasan_initgets called very early.(b) Of the KASAN tests included in the kernel source, all the relevant ones pass except for the "
global_oob_right" test, and it only fails whenCONFIG_KASAN_KUNIT_TEST=m; it passes when the kunit tests are built in. That is, KASAN is not detecting out-of-bounds accesses to module-global data.
]Signed-off-by Daniel Axtens <[email protected]>Signed-off-by Paul Mackerras <[email protected]>--- Documentation/dev-tools/kasan.rst | 11 +- Documentation/powerpc/kasan.txt | 48 ++++++++- arch/powerpc/Kconfig | 5 +- arch/powerpc/Kconfig.debug | 3 +- arch/powerpc/include/asm/book3s/64/hash.h | 4 + arch/powerpc/include/asm/book3s/64/pgtable.h | 3 + arch/powerpc/include/asm/book3s/64/radix.h | 13 ++- arch/powerpc/include/asm/interrupt.h | 52 +++++++--- arch/powerpc/include/asm/kasan.h | 22 ++++ arch/powerpc/include/asm/ptrace.h | 6 -- arch/powerpc/kernel/Makefile | 11 ++ arch/powerpc/kernel/process.c | 16 +-- arch/powerpc/kernel/smp.c | 22 ++-- arch/powerpc/kernel/traps.c | 6 +- arch/powerpc/kexec/Makefile | 2 + arch/powerpc/kvm/Makefile | 5 + arch/powerpc/lib/Makefile | 3 + arch/powerpc/mm/book3s64/Makefile | 9 ++ arch/powerpc/mm/kasan/Makefile | 1 + arch/powerpc/mm/kasan/init_book3s_64.c | 103 +++++++++++++++++++ arch/powerpc/mm/ptdump/ptdump.c | 3 +- arch/powerpc/platforms/Kconfig.cputype | 1 + arch/powerpc/platforms/powernv/Makefile | 8 ++ arch/powerpc/platforms/powernv/smp.c | 2 +- arch/powerpc/platforms/pseries/Makefile | 6 ++ arch/powerpc/sysdev/xics/xics-common.c | 4 +- arch/powerpc/sysdev/xive/common.c | 4 +- 27 files changed, 318 insertions(+), 55 deletions(-)create mode 100644
arch/powerpc/mm/kasan/init_book3s_64.cDocumentation/dev-tools/kasan.rst +6
-5@@ -36,8 +36,9 @@ Both software KASAN modes work with SLUB and SLAB memory allocators, while the hardware tag-based KASAN currently only supports SLUB. Currently, generic KASAN is supported for the x86_64, arm, arm64, xtensa, s390, -and riscv architectures. It is also supported on 32-bit powerpc kernels. -Tag-based KASAN modes are supported only for arm64. +and riscv architectures. It is also supported on powerpc for 32-bit kernels and +for 64-bit kernels running under the Radix MMU. Tag-based KASAN modes are +supported only for arm64. Usage -----@@ -350,10 +351,10 @@ CONFIG_KASAN_VMALLOC With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the cost of greater memory usage. Currently, this is supported on x86, -riscv, s390, and 32-bit powerpc. +riscv, s390, and powerpc. -It is optional, except on 32-bit powerpc kernels with module support, -where it is required. +It is optional, except on 64-bit powerpc kernels, and on 32-bit +powerpc kernels with module support, where it is required. This works by hooking into vmalloc and vmap and dynamically allocating real shadow memory to back the mappings.Documentation/powerpc/kasan.txt +47
-1@@ -1,4 +1,4 @@ -KASAN is supported on powerpc on 32-bit only. +KASAN is supported on powerpc on 32-bit and Radix 64-bit only. 32 bit support ==============@@ -10,3 +10,49 @@ fixmap area and occupies one eighth of the total kernel virtual memory space. Instrumentation of the vmalloc area is optional, unless built with modules, in which case it is required. + +64 bit support +============== + +Currently, only the radix MMU is supported. There have been versions for hash +and Book3E processors floating around on the mailing list, but nothing has been +merged. + +KASAN support on Book3S is a bit tricky to get right: + + - It would be good to support inline instrumentation so as to be able to catch + stack issues that cannot be caught with outline mode. + + - Inline instrumentation requires a fixed offset. + + - Book3S runs code with translations off ("real mode") during boot, including a + lot of generic device-tree parsing code which is used to determine MMU + features. + + - Some code - most notably a lot of KVM code - also runs with translations off + after boot. + + - Therefore any offset has to point to memory that is valid with + translations on or off. + +One approach is just to give up on inline instrumentation. This way boot-time +checks can be delayed until after the MMU is set is up, and we can just not +instrument any code that runs with translations off after booting. This is the +current approach. + +To avoid this limitiation, the KASAN shadow would have to be placed inside the +linear mapping, using the same high-bits trick we use for the rest of the linear +mapping. This is tricky: + + - We'd like to place it near the start of physical memory. In theory we can do + this at run-time based on how much physical memory we have, but this requires + being able to arbitrarily relocate the kernel, which is basically the tricky + part of KASLR. Not being game to implement both tricky things at once, this + is hopefully something we can revisit once we get KASLR for Book3S. + + - Alternatively, we can place the shadow at the _end_ of memory, but this + requires knowing how much contiguous physical memory a system has _at compile + time_. This is a big hammer, and has some unfortunate consequences: inablity + to handle discontiguous physical memory, total failure to boot on machines + with less memory than specified, and that machines with more memory than + specified can't use it. This was deemed unacceptable.arch/powerpc/Kconfig +1
-0@@ -105,6 +105,7 @@ config PPC # Please keep this list sorted alphabetically. # select ARCH_32BIT_OFF_T if PPC32 + select ARCH_DISABLE_KASAN_INLINE if PPC_RADIX_MMU select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVE select ARCH_HAS_COPY_MC if PPC64
arch/powerpc/Kconfig config PPC · line 156
Quoted 4 lines
arch/powerpc/Kconfig +1
-0@@ -152,6 +153,7 @@ config PPC select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_IRQS_OFF_ACTIVATE_MM select ARCH_WANT_LD_ORPHAN_WARN + select ARCH_WANTS_NO_INSTR
Can you explain why we need that ?
Is it tied to KASAN ? Is yes, why didn't we have it for PPC32 until now ?
Maybe that's independant of KASAN and would be worth a separate patch ?
Quoted 85 lines
arch/powerpc/Kconfig +2
-1select ARCH_WEAK_RELEASE_ACQUIRE select BINFMT_ELF select BUILDTIME_TABLE_SORT@@ -183,7 +185,8 @@ config PPC select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_JUMP_LABEL_RELATIVE select HAVE_ARCH_KASAN if PPC32 && PPC_PAGE_SHIFT <= 14 - select HAVE_ARCH_KASAN_VMALLOC if PPC32 && PPC_PAGE_SHIFT <= 14 + select HAVE_ARCH_KASAN if PPC_RADIX_MMU + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN select HAVE_ARCH_KFENCE if PPC_BOOK3S_32 || PPC_8xx || 40x select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITSarch/powerpc/Kconfig.debug +2
-1@@ -374,4 +374,5 @@ config PPC_FAST_ENDIAN_SWITCH config KASAN_SHADOW_OFFSET hex depends on KASAN - default 0xe0000000 + default 0xe0000000 if PPC32 + default 0xa80e000000000000 if PPC64arch/powerpc/include/asm/book3s/64/hash.h +4
-0@@ -18,6 +18,10 @@#include <asm/book3s/64/hash-4k.h> #endif +#define H_PTRS_PER_PTE (1 << H_PTE_INDEX_SIZE) +#define H_PTRS_PER_PMD (1 << H_PMD_INDEX_SIZE) +#define H_PTRS_PER_PUD (1 << H_PUD_INDEX_SIZE) +/* Bits to set in a PMD/PUD/PGD entry valid bit*/ #define HASH_PMD_VAL_BITS (0x8000000000000000UL)#define HASH_PUD_VAL_BITS (0x8000000000000000UL)arch/powerpc/include/asm/book3s/64/pgtable.h +3
-0@@ -232,6 +232,9 @@ extern unsigned long __pmd_frag_size_shift;#define PTRS_PER_PUD (1 << PUD_INDEX_SIZE)#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) +#define MAX_PTRS_PER_PTE ((H_PTRS_PER_PTE > R_PTRS_PER_PTE) ? H_PTRS_PER_PTE : R_PTRS_PER_PTE) +#define MAX_PTRS_PER_PMD ((H_PTRS_PER_PMD > R_PTRS_PER_PMD) ? H_PTRS_PER_PMD : R_PTRS_PER_PMD) +#define MAX_PTRS_PER_PUD ((H_PTRS_PER_PUD > R_PTRS_PER_PUD) ? H_PTRS_PER_PUD : R_PTRS_PER_PUD)#define MAX_PTRS_PER_PGD (1 << (H_PGD_INDEX_SIZE > RADIX_PGD_INDEX_SIZE ? \ H_PGD_INDEX_SIZE : RADIX_PGD_INDEX_SIZE))arch/powerpc/include/asm/book3s/64/radix.h +8
-3@@ -35,6 +35,11 @@#define RADIX_PMD_SHIFT (PAGE_SHIFT + RADIX_PTE_INDEX_SIZE)#define RADIX_PUD_SHIFT (RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE)#define RADIX_PGD_SHIFT (RADIX_PUD_SHIFT + RADIX_PUD_INDEX_SIZE) + +#define R_PTRS_PER_PTE (1 << RADIX_PTE_INDEX_SIZE) +#define R_PTRS_PER_PMD (1 << RADIX_PMD_INDEX_SIZE) +#define R_PTRS_PER_PUD (1 << RADIX_PUD_INDEX_SIZE) +/* * Size of EA range mapped by our pagetables. */ @@ -68,11 +73,11 @@* * * 3rd quadrant expanded: -* +------------------------------+ +* +------------------------------+ Highest address (0xc010000000000000) +* +------------------------------+ KASAN shadow end (0xc00fc00000000000) * | | * | | -* | | -* +------------------------------+ Kernel vmemmap end (0xc010000000000000) +* +------------------------------+ Kernel vmemmap end/shadow start (0xc00e000000000000) * | | * | 512TB | * | |
arch/powerpc/include/asm/book3s/64/radix.h line 135
Quoted 5 lines
arch/powerpc/include/asm/book3s/64/radix.h +2
-0@@ -126,6 +131,8 @@#define RADIX_VMEMMAP_SIZE RADIX_KERN_MAP_SIZE#define RADIX_VMEMMAP_END (RADIX_VMEMMAP_START + RADIX_VMEMMAP_SIZE) +/* For the sizes of the shadow area, see kasan.h */ +
Why does this comment pops up here ?
Quoted 50 lines
arch/powerpc/include/asm/book3s/64/radix.h +0
-0#ifndef __ASSEMBLY__#define RADIX_PTE_TABLE_SIZE (sizeof(pte_t) << RADIX_PTE_INDEX_SIZE)#define RADIX_PMD_TABLE_SIZE (sizeof(pmd_t) << RADIX_PMD_INDEX_SIZE)arch/powerpc/include/asm/interrupt.h +23
-8@@ -327,22 +327,46 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte }#endif +/* If data relocations are enabled, it's safe to use nmi_enter() */ +if (mfmsr () &MSR_DR ) { +nmi_enter (); +return ; + } +/* -* Do not use nmi_enter() for pseries hash guest taking a real-mode +* But do not use nmi_enter() for pseries hash guest taking a real-mode * NMI because not everything it touches is within the RMA limit. */ -if (!IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) || - !firmware_has_feature (FW_FEATURE_LPAR ) || -radix_enabled () || (mfmsr () &MSR_DR )) -nmi_enter (); +if (IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) && +firmware_has_feature (FW_FEATURE_LPAR ) && + !radix_enabled ()) +return ; + +/* +* Likewise, don't use it if we have some form of instrumentation (like +* KASAN shadow) that is not safe to access in real mode (even on radix) +*/ +if (IS_ENABLED (CONFIG_KASAN )) +return ; + +/* Otherwise, it should be safe to call it */ +nmi_enter (); }static inline void interrupt_nmi_exit_prepare (struct pt_regs *regs,struct interrupt_nmi_state *state) { -if (!IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) || - !firmware_has_feature (FW_FEATURE_LPAR ) || -radix_enabled () || (mfmsr () &MSR_DR )) +if (mfmsr () &MSR_DR ) { +// nmi_exit if relocations are on nmi_exit ();
arch/powerpc/include/asm/interrupt.h static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte · line 370
Quoted 10 lines
arch/powerpc/include/asm/interrupt.h +9
-0+ }else if (IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) && +firmware_has_feature (FW_FEATURE_LPAR ) && + !radix_enabled ()) { +// no nmi_exit for a pseries hash guest taking a real mode exception + }else if (IS_ENABLED (CONFIG_KASAN )) { +// no nmi_exit for KASAN in real mode + }else { +nmi_exit (); + }
I think all this changeset around MSR_DR versus NMI would be worth a separate patch with a dedicated explanation.
arch/powerpc/include/asm/interrupt.h static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter · line 437
Quoted 8 lines
arch/powerpc/include/asm/interrupt.h +1
-1/* * nmi does not call nap_adjust_return because nmi should not create @@ -410,7 +434,8 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter* Specific handlers may have additional restrictions. */ #define DEFINE_INTERRUPT_HANDLER_RAW (func) \ -static __always_inline long ____##func(struct pt_regs *regs); \ +static __always_inline __no_sanitize_address __no_kcsan long \
Why is this required for PPC64 while it wasn't for PPC32 ?
Any side effect on PPC32 ?
Quoted 44 lines
arch/powerpc/include/asm/interrupt.h +7
-3+____##func(struct pt_regs *regs); \ \ interrupt_handler long func(struct pt_regs *regs) \ { \@@ -424,7 +449,8 @@ interrupt_handler long func(struct pt_regs *regs) \ } \NOKPROBE_SYMBOL (func); \ \ -static __always_inline long ____##func(struct pt_regs *regs) +static __always_inline __no_sanitize_address __no_kcsan long \ +____##func(struct pt_regs *regs)/** * DECLARE_INTERRUPT_HANDLER - Declare synchronous interrupt handler function @@ -549,7 +575,8 @@ static __always_inline void ____##func(struct pt_regs *regs)* body with a pair of curly brackets. */ #define DEFINE_INTERRUPT_HANDLER_NMI (func) \ -static __always_inline long ____##func(struct pt_regs *regs); \ +static __always_inline __no_sanitize_address __no_kcsan long \ +____##func(struct pt_regs *regs); \ \ interrupt_handler long func(struct pt_regs *regs) \ { \@@ -566,7 +593,8 @@ interrupt_handler long func(struct pt_regs *regs) \ } \NOKPROBE_SYMBOL (func); \ \ -static __always_inline long ____##func(struct pt_regs *regs) +static __always_inline __no_sanitize_address __no_kcsan long \ +____##func(struct pt_regs *regs)/* Interrupt handlers */ arch/powerpc/include/asm/kasan.h +1
-0@@ -30,9 +30,31 @@#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET) +#ifdef CONFIG_PPC32 #define KASAN_SHADOW_END (-(-KASAN_SHADOW_START >> KASAN_SHADOW_SCALE_SHIFT))
arch/powerpc/include/asm/kasan.h line 44
Quoted 10 lines
arch/powerpc/include/asm/kasan.h +8
-0+#endif #ifdef CONFIG_KASAN +#ifdef CONFIG_PPC_BOOK3S_64 +/* +* The shadow ends before the highest accessible address +* because we don't need a shadow for the shadow. Instead: +* c00e000000000000 << 3 + a80e000000000000 = c00fc00000000000 +*/ +#define KASAN_SHADOW_END 0xc00fc00000000000UL
Would be easer to read if we could group that with PPC32 in a #ifdef/#else/#endif
Quoted 85 lines
arch/powerpc/include/asm/kasan.h +13
-0+ +DECLARE_STATIC_KEY_FALSE (powerpc_kasan_enabled_key); + +static __always_inline bool kasan_arch_is_ready(void) +{ +if (static_branch_likely (&powerpc_kasan_enabled_key)) +return true; +return false; +} + +#define kasan_arch_is_ready kasan_arch_is_ready +#endif +void kasan_early_init (void );void kasan_mmu_init (void );void kasan_init (void );arch/powerpc/include/asm/ptrace.h +0
-6@@ -305,12 +305,6 @@ static inline void regs_set_recoverable(struct pt_regs *regs)regs_set_return_msr (regs, regs->msr |MSR_RI ); } -static inline void regs_set_unrecoverable (struct pt_regs *regs) -{ -if (cpu_has_msr_ri ()) -regs_set_return_msr (regs, regs->msr & ~MSR_RI ); -} -#define arch_has_single_step () (1)#define arch_has_block_step () (true)#define ARCH_HAS_USER_SINGLE_STEP_REPORT arch/powerpc/kernel/Makefile +11
-0@@ -33,6 +33,17 @@ KASAN_SANITIZE_early_32.o := n KASAN_SANITIZE_cputable.o := n KASAN_SANITIZE_prom_init.o := n KASAN_SANITIZE_btext.o := n +KASAN_SANITIZE_paca.o := n +KASAN_SANITIZE_setup_64.o := n +KASAN_SANITIZE_mce.o := n +KASAN_SANITIZE_mce_power.o := n + +# we have to be particularly careful in ppc64 to exclude code that +# runs with translations off, as we cannot access the shadow with +# translations off. However, ppc32 can sanitize this. +ifdef CONFIG_PPC64 +KASAN_SANITIZE_traps.o := n +endif ifdef CONFIG_KASAN CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILINGarch/powerpc/kernel/process.c +6
-5@@ -2220,8 +2220,8 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,break ; stack = (unsigned long *) sp; - newsp = stack[0 ]; - ip = stack[STACK_FRAME_LR_SAVE ]; + newsp =READ_ONCE_NOCHECK (stack[0 ]); + ip =READ_ONCE_NOCHECK (stack[STACK_FRAME_LR_SAVE ]);if (!firstframe || ip != lr) {printk ("%s[" REG "] [" REG "] %pS" , loglvl, sp, ip, (void *)ip);@@ -2239,17 +2239,19 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,* See if this is an exception frame. * We look for the "regshere" marker in the current frame. */ -if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) - && stack[STACK_FRAME_MARKER ] ==STACK_FRAME_REGS_MARKER ) { +if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) && + (READ_ONCE_NOCHECK (stack[STACK_FRAME_MARKER ]) == +STACK_FRAME_REGS_MARKER )) {struct pt_regs *regs = (struct pt_regs *) (sp +STACK_FRAME_OVERHEAD ); - lr = regs->link; + lr =READ_ONCE_NOCHECK (regs->link); printk("%s--- interrupt: %lx at %pS\n",
arch/powerpc/kernel/process.c void __no_sanitize_address show_stack(struct task_struct *tsk, · line 2257
Quoted 10 lines
arch/powerpc/kernel/process.c +3
-2- loglvl, regs->trap, (void *)regs->nip); + loglvl,READ_ONCE_NOCHECK (regs->trap), + (void *)READ_ONCE_NOCHECK(regs->nip));__show_regs (regs);printk ("%s--- interrupt: %lx\n" , - loglvl, regs->trap); + loglvl,READ_ONCE_NOCHECK (regs->trap)); firstframe =1 ; }
This change we submitted as a standalone patch and was rejected as is, see
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/
v2 was accepted, see
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/
Therefore AFAIU this change is redundant with the accepted v2 and should be dropped.
Quoted 48 lines
arch/powerpc/kernel/smp.c +10
-10@@ -413,32 +413,32 @@ static struct cpumask nmi_ipi_pending_mask;static bool nmi_ipi_busy = false;static void (*nmi_ipi_function)(struct pt_regs *) =NULL ; -static void nmi_ipi_lock_start (unsigned long *flags) +noinstr static void nmi_ipi_lock_start(unsigned long *flags) {raw_local_irq_save (*flags);hard_irq_disable (); -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) { +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) {raw_local_irq_restore (*flags); -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 );raw_local_irq_save (*flags);hard_irq_disable (); } } -static void nmi_ipi_lock (void ) +noinstr static void nmi_ipi_lock(void) { -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 ); } -static void nmi_ipi_unlock (void ) +noinstr static void nmi_ipi_unlock(void) {smp_mb (); -WARN_ON (atomic_read (&__nmi_ipi_lock) !=1 ); -atomic_set (&__nmi_ipi_lock,0 ); +WARN_ON (arch_atomic_read (&__nmi_ipi_lock) !=1 ); +arch_atomic_set (&__nmi_ipi_lock,0 ); } -static void nmi_ipi_unlock_end (unsigned long *flags) +noinstr static void nmi_ipi_unlock_end(unsigned long *flags) {nmi_ipi_unlock ();raw_local_irq_restore (*flags);
arch/powerpc/kernel/smp.c static void nmi_ipi_unlock_end(unsigned long *flags) · line 453
Quoted 8 lines
arch/powerpc/kernel/smp.c +1
-1@@ -447,7 +447,7 @@ static void nmi_ipi_unlock_end(unsigned long *flags)/* * Platform NMI handler calls this to ack */ -int smp_handle_nmi_ipi (struct pt_regs *regs) +noinstr int smp_handle_nmi_ipi(struct pt_regs *regs) {void (*fn)(struct pt_regs *) =NULL ;unsigned long flags;
Can you explain those changes from atomic_xxx to arch_atomic_xxx ?
Should it be a separate patch ?
Quoted 66 lines
arch/powerpc/kernel/traps.c +4
-2@@ -393,7 +393,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)* Builds that do not support KVM could take this second option to increase * the recoverability of NMIs. */ -void hv_nmi_check_nonrecoverable (struct pt_regs *regs) +noinstr void hv_nmi_check_nonrecoverable(struct pt_regs *regs) {#ifdef CONFIG_PPC_POWERNV unsigned long kbase = (unsigned long )_stext;@@ -433,7 +433,9 @@ void hv_nmi_check_nonrecoverable(struct pt_regs *regs)return ; nonrecoverable: -regs_set_unrecoverable (regs); + regs->msr &= ~MSR_RI ; + local_paca->hsrr_valid =0 ; + local_paca->srr_valid =0 ;#endif }DEFINE_INTERRUPT_HANDLER_NMI (system_reset_exception)arch/powerpc/kexec/Makefile +2
-0@@ -13,3 +13,5 @@ obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS) GCOV_PROFILE_core_$(BITS).o := n KCOV_INSTRUMENT_core_$(BITS).o := n UBSAN_SANITIZE_core_$(BITS).o := n +KASAN_SANITIZE_core.o := n +KASAN_SANITIZE_core_$(BITS) := narch/powerpc/kvm/Makefile +5
-0@@ -134,3 +134,8 @@ obj-$(CONFIG_KVM_BOOK3S_64_PR) += kvm-pr.o obj-$(CONFIG_KVM_BOOK3S_64_HV) += kvm-hv.o obj-y += $(kvm-book3s_64-builtin-objs-y) + +# KVM does a lot in real-mode, and 64-bit Book3S KASAN doesn't support that +ifdef CONFIG_PPC_BOOK3S_64 +KASAN_SANITIZE := n +endifarch/powerpc/lib/Makefile +3
-0@@ -13,6 +13,9 @@ CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE) KASAN_SANITIZE_code-patching.o := n KASAN_SANITIZE_feature-fixups.o := n +# restart_table.o contains functions called in the NMI interrupt path +# which can be in real mode. Disable KASAN. +KASAN_SANITIZE_restart_table.o := n ifdef CONFIG_KASAN CFLAGS_code-patching.o += -DDISABLE_BRANCH_PROFILINGarch/powerpc/mm/book3s64/Makefile +0
-0
arch/powerpc/mm/book3s64/Makefile obj-$(CONFIG_PPC_PKEY) += pkeys.o · line 29
Quoted 6 lines
arch/powerpc/mm/book3s64/Makefile +3
-0@@ -24,3 +24,12 @@ obj-$(CONFIG_PPC_PKEY) += pkeys.o # Instrumenting the SLB fault path can lead to duplicate SLB entries KCOV_INSTRUMENT_slb.o := n + +# Parts of these can run in real mode and therefore are +# not safe with the current outline KASAN implementation
But are we not safe about KASAN being disabled when in real mode ? Isn't it the purpose of kasan_arch_is_ready ?
Quoted 111 lines
arch/powerpc/mm/book3s64/Makefile +6
-0+KASAN_SANITIZE_mmu_context.o := n +KASAN_SANITIZE_pgtable.o := n +KASAN_SANITIZE_radix_pgtable.o := n +KASAN_SANITIZE_radix_tlb.o := n +KASAN_SANITIZE_slb.o := n +KASAN_SANITIZE_pkeys.o := narch/powerpc/mm/kasan/Makefile +1
-0@@ -5,3 +5,4 @@ KASAN_SANITIZE := n obj-$(CONFIG_PPC32) += init_32.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_BOOK3S_32) += book3s_32.o +obj-$(CONFIG_PPC_BOOK3S_64) += init_book3s_64.oarch/powerpc/mm/kasan/init_book3s_64.c new file +90
-0@@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* KASAN for 64-bit Book3S powerpc +* +* Copyright (C) 2019-2020 IBM Corporation +* Author: Daniel Axtens <[email protected]> +*/ + +/* +# ppc64 turns on virtual memory late in boot, after calling into generic code +# like the device-tree parser, so it uses this in conjunction with a hook in +# outline mode to avoid invalid access early in boot. +*/ + +#define DISABLE_BRANCH_PROFILING + +#include <linux/kasan.h> +#include <linux/printk.h> +#include <linux/sched/task.h> +#include <linux/memblock.h> +#include <asm/pgalloc.h> + +DEFINE_STATIC_KEY_FALSE (powerpc_kasan_enabled_key); + +static void __init kasan_init_phys_region (void *start,void *end) +{ +unsigned long k_start, k_end, k_cur; +void *va; + +if (start >= end) +return ; + + k_start =ALIGN_DOWN ((unsigned long )kasan_mem_to_shadow (start),PAGE_SIZE ); + k_end =ALIGN ((unsigned long )kasan_mem_to_shadow (end),PAGE_SIZE ); + + va =memblock_alloc (k_end - k_start,PAGE_SIZE ); +for (k_cur = k_start; k_cur < k_end; k_cur +=PAGE_SIZE , va +=PAGE_SIZE ) +map_kernel_page (k_cur,__pa (va),PAGE_KERNEL ); +} + +void __init kasan_init (void ) +{ +/* +* We want to do the following things: +* 1) Map real memory into the shadow for all physical memblocks +* This takes us from c000... to c008... +* 2) Leave a hole over the shadow of vmalloc space. KASAN_VMALLOC +* will manage this for us. +* This takes us from c008... to c00a... +* 3) Map the 'early shadow'/zero page over iomap and vmemmap space. +* This takes us up to where we start at c00e... +*/ + +void *k_start =kasan_mem_to_shadow ((void *)RADIX_VMALLOC_END ); +void *k_end =kasan_mem_to_shadow ((void *)RADIX_VMEMMAP_END ); +phys_addr_t start, end; +u64 i; +pte_t zero_pte =pfn_pte (virt_to_pfn (kasan_early_shadow_page),PAGE_KERNEL ); + +if (!early_radix_enabled ()) { +pr_warn ("KASAN not enabled as it requires radix!" ); +return ; + } + +for_each_mem_range (i, &start, &end) +kasan_init_phys_region ((void *)start, (void *)end); + +for (i =0 ; i <PTRS_PER_PTE ; i++) +__set_pte_at (&init_mm, (unsigned long )kasan_early_shadow_page, + &kasan_early_shadow_pte[i], zero_pte,0 ); + +for (i =0 ; i <PTRS_PER_PMD ; i++) +pmd_populate_kernel (&init_mm, &kasan_early_shadow_pmd[i], + kasan_early_shadow_pte); + +for (i =0 ; i <PTRS_PER_PUD ; i++) +pud_populate (&init_mm, &kasan_early_shadow_pud[i], + kasan_early_shadow_pmd); + +/* map the early shadow over the iomap and vmemmap space */ +kasan_populate_early_shadow (k_start, k_end); + +/* mark early shadow region as RO and wipe it */ + zero_pte =pfn_pte (virt_to_pfn (kasan_early_shadow_page),PAGE_KERNEL_RO ); +for (i =0 ; i <PTRS_PER_PTE ; i++) +__set_pte_at (&init_mm, (unsigned long )kasan_early_shadow_page, + &kasan_early_shadow_pte[i], zero_pte,0 ); + +/* +* clear_page relies on some cache info that hasn't been set up yet.
arch/powerpc/mm/kasan/init_book3s_64.c line 100
Quoted 10 lines
arch/powerpc/mm/kasan/init_book3s_64.c new file +10
-0+* It ends up looping ~forever and blows up other data. +* Use memset instead. +*/ +memset (kasan_early_shadow_page,0 ,PAGE_SIZE ); + +static_branch_inc (&powerpc_kasan_enabled_key); + +/* Enable error messages */ + init_task.kasan_depth =0 ; +pr_info ("KASAN init done (64-bit Book3S)\n" );
Maybe mention RADIX in the printed message ?
Quoted 128 lines
arch/powerpc/mm/kasan/init_book3s_64.c new file +3
-0+} + +void __init kasan_late_init (void ) { }arch/powerpc/mm/ptdump/ptdump.c +2
-1@@ -21,6 +21,7 @@#include <linux/seq_file.h> #include <asm/fixmap.h> #include <linux/const.h> +#include <linux/kasan.h> #include <asm/page.h> #include <asm/hugetlb.h> @@ -289,11 +290,11 @@ static void populate_markers(void)#endif address_markers[i++].start_address =FIXADDR_START ; address_markers[i++].start_address =FIXADDR_TOP ; +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_KASAN address_markers[i++].start_address =KASAN_SHADOW_START ; address_markers[i++].start_address =KASAN_SHADOW_END ;#endif -#endif /* CONFIG_PPC64 */ }static int ptdump_show (struct seq_file *m,void *v)arch/powerpc/platforms/Kconfig.cputype +1
-0@@ -104,6 +104,7 @@ config PPC_BOOK3S_64 select HAVE_MOVE_PUD select IRQ_WORK select PPC_64S_HASH_MMU if !PPC_RADIX_MMU + select KASAN_VMALLOC if KASAN config PPC_BOOK3E_64 bool "Embedded processors"arch/powerpc/platforms/powernv/Makefile +8
-0@@ -1,4 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 + +# nothing that deals with real mode is safe to KASAN +# in particular, idle code runs a bunch of things in real mode +KASAN_SANITIZE_idle.o := n +KASAN_SANITIZE_pci-ioda.o := n +# pnv_machine_check_early +KASAN_SANITIZE_setup.o := n + obj-y += setup.o opal-call.o opal-wrappers.o opal.o opal-async.o obj-y += idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.oarch/powerpc/platforms/powernv/smp.c +1
-1@@ -345,7 +345,7 @@ static void __init pnv_smp_probe(void) } } -static int pnv_system_reset_exception (struct pt_regs *regs) +noinstr static int pnv_system_reset_exception(struct pt_regs *regs) {if (smp_handle_nmi_ipi (regs))return 1 ;arch/powerpc/platforms/pseries/Makefile +6
-0@@ -32,3 +32,9 @@ obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_PPC_VAS) += vas.o obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += cc_platform.o + +# nothing that operates in real mode is safe for KASAN +KASAN_SANITIZE_ras.o := n +KASAN_SANITIZE_kexec.o := n +#machine_kexec +KASAN_SANITIZE_setup.o := narch/powerpc/sysdev/xics/xics-common.c +2
-2@@ -146,7 +146,7 @@ void __init xics_smp_probe(void)#endif /* CONFIG_SMP */ -void xics_teardown_cpu (void ) +noinstr void xics_teardown_cpu(void) {struct xics_cppr *os_cppr =this_cpu_ptr (&xics_cppr);@@ -159,7 +159,7 @@ void xics_teardown_cpu(void) icp_ops->teardown_cpu (); } -void xics_kexec_teardown_cpu (int secondary) +noinstr void xics_kexec_teardown_cpu(int secondary) {xics_teardown_cpu ();arch/powerpc/sysdev/xive/common.c +2
-2@@ -1241,7 +1241,7 @@ static int xive_setup_cpu_ipi(unsigned int cpu)return 0 ; } -static void xive_cleanup_cpu_ipi (unsigned int cpu,struct xive_cpu *xc) +noinstr static void xive_cleanup_cpu_ipi(unsigned int cpu, struct xive_cpu *xc) {unsigned int xive_ipi_irq =xive_ipi_cpu_to_irq (cpu);@@ -1634,7 +1634,7 @@ void xive_flush_interrupt(void)#endif /* CONFIG_SMP */ -void xive_teardown_cpu (void ) +noinstr void xive_teardown_cpu(void) {struct xive_cpu *xc =__this_cpu_read (xive_cpu);unsigned int cpu =smp_processor_id ();
Re: [PATCH 3/3] [RFC] powerpc: Book3S 64-bit outline-only KASAN support
Quoted 7 lines · Christophe Leroy
Le 11/05/2022 à 09:28, Paul Mackerras a écrit :
Quoted 4 lines
From: Daniel Axtens <[email protected]>
Implement a limited form of KASAN for Book3S 64-bit machines running under the Radix MMU, supporting only outline mode.
[snip]
Quoted 11 lines
Quoted 11 lines
arch/powerpc/Kconfig +1
-0@@ -105,6 +105,7 @@ config PPC # Please keep this list sorted alphabetically. # select ARCH_32BIT_OFF_T if PPC32 + select ARCH_DISABLE_KASAN_INLINE if PPC_RADIX_MMU select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVE
Quoted 8 lines
arch/powerpc/Kconfig config PPC · line 156
Quoted 6 lines
arch/powerpc/Kconfig +1
-0select ARCH_HAS_COPY_MC if PPC64@@ -152,6 +153,7 @@ config PPC select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_IRQS_OFF_ACTIVATE_MM select ARCH_WANT_LD_ORPHAN_WARN + select ARCH_WANTS_NO_INSTRCan you explain why we need that ?
The help text for the option says:
An architecture should select this if the noinstr macro is being used on functions to denote that the toolchain should avoid instrumenting such functions and is required for correctness.
All it really seems to do is restrict the conditions under which the GCOV and KCOV options can be enabled.
Quoted 1 line
Is it tied to KASAN ? Is yes, why didn't we have it for PPC32 until now ?
Since we really do need to avoid instrumenting certain functions on ppc64 (as in things will break if we do instrument them), I think we need to select ARCH_WANTS_NO_INSTR.
For ppc32, as far as I recall there is much less code that runs in real mode and it is mostly assembler (except for some boot code), mostly because all addresses have to be explicitly translated to physical addresses for 32-bit real-mode code, unlike ppc64 where we can use access memory in the linear mapping using virtual addresses because of the fact that the CPU ignores the top 4 bits of the effective address in real mode. That said, there is a lot less code that runs in real mode on ppc64 than there used to be.
Quoted 1 line
Maybe that's independant of KASAN and would be worth a separate patch ?
Yes, possibly, though KASAN does appear to be the only user of noinstr in arch/powerpc.
[snip]
Quoted 35 lines
Quoted 35 lines
arch/powerpc/include/asm/book3s/64/radix.h +8
-3@@ -35,6 +35,11 @@#define RADIX_PMD_SHIFT (PAGE_SHIFT + RADIX_PTE_INDEX_SIZE)#define RADIX_PUD_SHIFT (RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE)#define RADIX_PGD_SHIFT (RADIX_PUD_SHIFT + RADIX_PUD_INDEX_SIZE) + +#define R_PTRS_PER_PTE (1 << RADIX_PTE_INDEX_SIZE) +#define R_PTRS_PER_PMD (1 << RADIX_PMD_INDEX_SIZE) +#define R_PTRS_PER_PUD (1 << RADIX_PUD_INDEX_SIZE) +/* * Size of EA range mapped by our pagetables. */ @@ -68,11 +73,11 @@* * * 3rd quadrant expanded: -* +------------------------------+ +* +------------------------------+ Highest address (0xc010000000000000) +* +------------------------------+ KASAN shadow end (0xc00fc00000000000) * | | * | | -* | | -* +------------------------------+ Kernel vmemmap end (0xc010000000000000) +* +------------------------------+ Kernel vmemmap end/shadow start (0xc00e000000000000) * | | * | 512TB | * | | @@ -126,6 +131,8 @@#define RADIX_VMEMMAP_SIZE RADIX_KERN_MAP_SIZE#define RADIX_VMEMMAP_END (RADIX_VMEMMAP_START + RADIX_VMEMMAP_SIZE)
Quoted 4 lines
arch/powerpc/include/asm/book3s/64/radix.h line 135
Quoted 2 lines
arch/powerpc/include/asm/book3s/64/radix.h +2
-0+/* For the sizes of the shadow area, see kasan.h */ +Why does this comment pops up here ?
Do you mean, why is it there at all, or do you mean why is it in that particular place rather than closer to the "3rd quadrant expanded" diagram or something?
Quoted 51 lines
Quoted 51 lines
arch/powerpc/include/asm/book3s/64/radix.h +0
-0#ifndef __ASSEMBLY__#define RADIX_PTE_TABLE_SIZE (sizeof(pte_t) << RADIX_PTE_INDEX_SIZE)#define RADIX_PMD_TABLE_SIZE (sizeof(pmd_t) << RADIX_PMD_INDEX_SIZE)arch/powerpc/include/asm/interrupt.h +28
-4@@ -327,22 +327,46 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte }#endif +/* If data relocations are enabled, it's safe to use nmi_enter() */ +if (mfmsr () &MSR_DR ) { +nmi_enter (); +return ; + } +/* -* Do not use nmi_enter() for pseries hash guest taking a real-mode +* But do not use nmi_enter() for pseries hash guest taking a real-mode * NMI because not everything it touches is within the RMA limit. */ +if (IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) && +firmware_has_feature (FW_FEATURE_LPAR ) && + !radix_enabled ()) +return ; + +/* +* Likewise, don't use it if we have some form of instrumentation (like +* KASAN shadow) that is not safe to access in real mode (even on radix) +*/ +if (IS_ENABLED (CONFIG_KASAN )) +return ; + +/* Otherwise, it should be safe to call it */ +nmi_enter (); }static inline void interrupt_nmi_exit_prepare (struct pt_regs *regs,struct interrupt_nmi_state *state) { -if (!IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) || - !firmware_has_feature (FW_FEATURE_LPAR ) || -radix_enabled () || (mfmsr () &MSR_DR )) +if (mfmsr () &MSR_DR ) { +// nmi_exit if relocations are on nmi_exit (); + }else if (IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) && +firmware_has_feature (FW_FEATURE_LPAR ) && + !radix_enabled ()) { +// no nmi_exit for a pseries hash guest taking a real mode exception + }else if (IS_ENABLED (CONFIG_KASAN )) {
Quoted 8 lines
arch/powerpc/include/asm/interrupt.h static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte · line 370
Quoted 5 lines
arch/powerpc/include/asm/interrupt.h +4
-0+// no nmi_exit for KASAN in real mode + }else { +nmi_exit (); + }I think all this changeset around
MSR_DRversus NMI would be worth a separate patch with a dedicated explanation.
It's actually not as much of a change as it might appear. All that is really being done is to add !IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() and nmi_exit() when the CPU is in real mode. In other words, the condition is equivalent to:
if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !firmware_has_feature(FW_FEATURE_LPAR) || radix_enabled()) && !IS_ENABLED(CONFIG_KASAN)) || (mfmsr() & MSR_DR)) nmi_enter();
I think the version as Daniel has transformed it is more readable though. It could be a separate patch, sure.
Quoted 10 lines
arch/powerpc/include/asm/interrupt.h static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter · line 437
Quoted 8 lines
arch/powerpc/include/asm/interrupt.h +1
-1/* * nmi does not call nap_adjust_return because nmi should not create @@ -410,7 +434,8 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter* Specific handlers may have additional restrictions. */ #define DEFINE_INTERRUPT_HANDLER_RAW (func) \ -static __always_inline long ____##func(struct pt_regs *regs); \ +static __always_inline __no_sanitize_address __no_kcsan long \Why is this required for PPC64 while it wasn't for PPC32 ?
I assume because we switch into virtual mode sooner on ppc32, because of the need to transform addresses explicitly in real mode. I haven't looked at the ppc32 interrupt code for a long time (and even the ppc64 interrupt code is now quite different from what I recall).
Quoted 1 line
Any side effect on PPC32 ?
I suppose you won't get KASAN coverage of those interrupt handling functions, where you did previously. Do you want me to make the "__no_sanitize_address __no_kcsan" apply only on ppc64?
[snip]
Quoted 12 lines
Quoted 12 lines
arch/powerpc/include/asm/kasan.h +2
-0@@ -30,9 +30,31 @@#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET) +#ifdef CONFIG_PPC32 #define KASAN_SHADOW_END (-(-KASAN_SHADOW_START >> KASAN_SHADOW_SCALE_SHIFT)) +#endif
Quoted 11 lines
arch/powerpc/include/asm/kasan.h line 44
Quoted 8 lines
arch/powerpc/include/asm/kasan.h +7
-0#ifdef CONFIG_KASAN +#ifdef CONFIG_PPC_BOOK3S_64 +/* +* The shadow ends before the highest accessible address +* because we don't need a shadow for the shadow. Instead: +* c00e000000000000 << 3 + a80e000000000000 = c00fc00000000000 +*/ +#define KASAN_SHADOW_END 0xc00fc00000000000ULWould be easer to read if we could group that with PPC32 in a #ifdef/#else/#endif
Sure. It's a bit weird that KASAN_SHADOW_END is always defined for ppc32, but only if CONFIG_KASAN=y for ppc64. I'll fix it.
[snip]
Quoted 67 lines
Quoted 52 lines
arch/powerpc/kernel/Makefile +11
-0@@ -33,6 +33,17 @@ KASAN_SANITIZE_early_32.o := n KASAN_SANITIZE_cputable.o := n KASAN_SANITIZE_prom_init.o := n KASAN_SANITIZE_btext.o := n +KASAN_SANITIZE_paca.o := n +KASAN_SANITIZE_setup_64.o := n +KASAN_SANITIZE_mce.o := n +KASAN_SANITIZE_mce_power.o := n + +# we have to be particularly careful in ppc64 to exclude code that +# runs with translations off, as we cannot access the shadow with +# translations off. However, ppc32 can sanitize this. +ifdef CONFIG_PPC64 +KASAN_SANITIZE_traps.o := n +endif ifdef CONFIG_KASAN CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILINGarch/powerpc/kernel/process.c +6
-5@@ -2220,8 +2220,8 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,break ; stack = (unsigned long *) sp; - newsp = stack[0 ]; - ip = stack[STACK_FRAME_LR_SAVE ]; + newsp =READ_ONCE_NOCHECK (stack[0 ]); + ip =READ_ONCE_NOCHECK (stack[STACK_FRAME_LR_SAVE ]);if (!firstframe || ip != lr) {printk ("%s[" REG "] [" REG "] %pS" , loglvl, sp, ip, (void *)ip);@@ -2239,17 +2239,19 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,* See if this is an exception frame. * We look for the "regshere" marker in the current frame. */ -if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) - && stack[STACK_FRAME_MARKER ] ==STACK_FRAME_REGS_MARKER ) { +if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) && + (READ_ONCE_NOCHECK (stack[STACK_FRAME_MARKER ]) == +STACK_FRAME_REGS_MARKER )) {struct pt_regs *regs = (struct pt_regs *) (sp +STACK_FRAME_OVERHEAD ); - lr = regs->link; + lr =READ_ONCE_NOCHECK (regs->link); printk("%s--- interrupt: %lx at %pS\n",arch/powerpc/kernel/process.c void __no_sanitize_address show_stack(struct task_struct *tsk, · line 2257
Quoted 10 lines
arch/powerpc/kernel/process.c +3
-2- loglvl, regs->trap, (void *)regs->nip); + loglvl,READ_ONCE_NOCHECK (regs->trap), + (void *)READ_ONCE_NOCHECK(regs->nip));__show_regs (regs);printk ("%s--- interrupt: %lx\n" , - loglvl, regs->trap); + loglvl,READ_ONCE_NOCHECK (regs->trap)); firstframe =1 ; }This change we submitted as a standalone patch and was rejected as is, see
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/
Quoted 5 lines
v2 was accepted, see
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/Therefore AFAIU this change is redundant with the accepted v2 and should be dropped.
OK, thanks for the history. I'll drop this change.
Quoted 42 lines
Quoted 42 lines
arch/powerpc/kernel/smp.c +9
-9@@ -413,32 +413,32 @@ static struct cpumask nmi_ipi_pending_mask;static bool nmi_ipi_busy = false;static void (*nmi_ipi_function)(struct pt_regs *) =NULL ; -static void nmi_ipi_lock_start (unsigned long *flags) +noinstr static void nmi_ipi_lock_start(unsigned long *flags) {raw_local_irq_save (*flags);hard_irq_disable (); -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) { +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) {raw_local_irq_restore (*flags); -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 );raw_local_irq_save (*flags);hard_irq_disable (); } } -static void nmi_ipi_lock (void ) +noinstr static void nmi_ipi_lock(void) { -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 ); } -static void nmi_ipi_unlock (void ) +noinstr static void nmi_ipi_unlock(void) {smp_mb (); -WARN_ON (atomic_read (&__nmi_ipi_lock) !=1 ); -atomic_set (&__nmi_ipi_lock,0 ); +WARN_ON (arch_atomic_read (&__nmi_ipi_lock) !=1 ); +arch_atomic_set (&__nmi_ipi_lock,0 ); }
Quoted 16 lines
Quoted 6 lines
arch/powerpc/kernel/smp.c +1
-1-static void nmi_ipi_unlock_end (unsigned long *flags) +noinstr static void nmi_ipi_unlock_end(unsigned long *flags) {nmi_ipi_unlock ();raw_local_irq_restore (*flags);arch/powerpc/kernel/smp.c static void nmi_ipi_unlock_end(unsigned long *flags) · line 453
Quoted 8 lines
arch/powerpc/kernel/smp.c +1
-1@@ -447,7 +447,7 @@ static void nmi_ipi_unlock_end(unsigned long *flags)/* * Platform NMI handler calls this to ack */ -int smp_handle_nmi_ipi (struct pt_regs *regs) +noinstr int smp_handle_nmi_ipi(struct pt_regs *regs) {void (*fn)(struct pt_regs *) =NULL ;unsigned long flags;Can you explain those changes from
atomic_xxxtoarch_atomic_xxx?
With KASAN enabled, atomic_read() and similar functions become wrappers which explicitly call KASAN checking functions. See include/linux/atomic/atomic-instrumented.h and include/linux/instrumented.h. Since we don't want those NMI functions instrumented, we have to use the arch_atomic_* functions so as to avoid getting the explicit instrumentation calls. As to why we don't want instrumentation here, it's because we want to avoid crashing when doing kexec or more particularly kdump, I believe.
Quoted 1 line
Should it be a separate patch ?
Could be - matter of taste I guess.
[snip]
Quoted 6 lines
Quoted 6 lines
arch/powerpc/mm/book3s64/Makefile +0
-0@@ -24,3 +24,12 @@ obj-$(CONFIG_PPC_PKEY) += pkeys.o
Quoted 8 lines
arch/powerpc/mm/book3s64/Makefile obj-$(CONFIG_PPC_PKEY) += pkeys.o · line 29
Quoted 5 lines
arch/powerpc/mm/book3s64/Makefile +3
-0# Instrumenting the SLB fault path can lead to duplicate SLB entries KCOV_INSTRUMENT_slb.o := n + +# Parts of these can run in real mode and therefore are +# not safe with the current outline KASAN implementationBut are we not safe about KASAN being disabled when in real mode ? Isn't it the purpose of
kasan_arch_is_ready?
We have not added kasan_arch_is_ready() checks to all of the KASAN entry points, only those that are called early in boot before KASAN has been initialized, as I found out when I changed kasan_init() to just return without doing anything if radix is not enabled. On POWER8, the kernel crashed shortly afterwards in generic KASAN code that didn't have a kasan_arch_is_ready() call in it.
As to whether we should add such calls to every entry point in the generic KASAN code -- it would probably be a good idea to do that, though a bit fragile in the long term because people will add stuff to the generic KASAN code without realizing there needs to be the guard, since their architecture won't need it.
In the really long term, hopefully we can eventually drop HPT and get to the point where practically nothing runs in real mode. That's a fair way off though.
Quoted 115 lines
Quoted 115 lines
arch/powerpc/mm/book3s64/Makefile +6
-0+KASAN_SANITIZE_mmu_context.o := n +KASAN_SANITIZE_pgtable.o := n +KASAN_SANITIZE_radix_pgtable.o := n +KASAN_SANITIZE_radix_tlb.o := n +KASAN_SANITIZE_slb.o := n +KASAN_SANITIZE_pkeys.o := narch/powerpc/mm/kasan/Makefile +1
-0@@ -5,3 +5,4 @@ KASAN_SANITIZE := n obj-$(CONFIG_PPC32) += init_32.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_BOOK3S_32) += book3s_32.o +obj-$(CONFIG_PPC_BOOK3S_64) += init_book3s_64.oarch/powerpc/mm/kasan/init_book3s_64.c new file +94
-0@@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* KASAN for 64-bit Book3S powerpc +* +* Copyright (C) 2019-2020 IBM Corporation +* Author: Daniel Axtens <[email protected]> +*/ + +/* +# ppc64 turns on virtual memory late in boot, after calling into generic code +# like the device-tree parser, so it uses this in conjunction with a hook in +# outline mode to avoid invalid access early in boot. +*/ + +#define DISABLE_BRANCH_PROFILING + +#include <linux/kasan.h> +#include <linux/printk.h> +#include <linux/sched/task.h> +#include <linux/memblock.h> +#include <asm/pgalloc.h> + +DEFINE_STATIC_KEY_FALSE (powerpc_kasan_enabled_key); + +static void __init kasan_init_phys_region (void *start,void *end) +{ +unsigned long k_start, k_end, k_cur; +void *va; + +if (start >= end) +return ; + + k_start =ALIGN_DOWN ((unsigned long )kasan_mem_to_shadow (start),PAGE_SIZE ); + k_end =ALIGN ((unsigned long )kasan_mem_to_shadow (end),PAGE_SIZE ); + + va =memblock_alloc (k_end - k_start,PAGE_SIZE ); +for (k_cur = k_start; k_cur < k_end; k_cur +=PAGE_SIZE , va +=PAGE_SIZE ) +map_kernel_page (k_cur,__pa (va),PAGE_KERNEL ); +} + +void __init kasan_init (void ) +{ +/* +* We want to do the following things: +* 1) Map real memory into the shadow for all physical memblocks +* This takes us from c000... to c008... +* 2) Leave a hole over the shadow of vmalloc space. KASAN_VMALLOC +* will manage this for us. +* This takes us from c008... to c00a... +* 3) Map the 'early shadow'/zero page over iomap and vmemmap space. +* This takes us up to where we start at c00e... +*/ + +void *k_start =kasan_mem_to_shadow ((void *)RADIX_VMALLOC_END ); +void *k_end =kasan_mem_to_shadow ((void *)RADIX_VMEMMAP_END ); +phys_addr_t start, end; +u64 i; +pte_t zero_pte =pfn_pte (virt_to_pfn (kasan_early_shadow_page),PAGE_KERNEL ); + +if (!early_radix_enabled ()) { +pr_warn ("KASAN not enabled as it requires radix!" ); +return ; + } + +for_each_mem_range (i, &start, &end) +kasan_init_phys_region ((void *)start, (void *)end); + +for (i =0 ; i <PTRS_PER_PTE ; i++) +__set_pte_at (&init_mm, (unsigned long )kasan_early_shadow_page, + &kasan_early_shadow_pte[i], zero_pte,0 ); + +for (i =0 ; i <PTRS_PER_PMD ; i++) +pmd_populate_kernel (&init_mm, &kasan_early_shadow_pmd[i], + kasan_early_shadow_pte); + +for (i =0 ; i <PTRS_PER_PUD ; i++) +pud_populate (&init_mm, &kasan_early_shadow_pud[i], + kasan_early_shadow_pmd); + +/* map the early shadow over the iomap and vmemmap space */ +kasan_populate_early_shadow (k_start, k_end); + +/* mark early shadow region as RO and wipe it */ + zero_pte =pfn_pte (virt_to_pfn (kasan_early_shadow_page),PAGE_KERNEL_RO ); +for (i =0 ; i <PTRS_PER_PTE ; i++) +__set_pte_at (&init_mm, (unsigned long )kasan_early_shadow_page, + &kasan_early_shadow_pte[i], zero_pte,0 ); + +/* +* clear_page relies on some cache info that hasn't been set up yet. +* It ends up looping ~forever and blows up other data. +* Use memset instead. +*/ +memset (kasan_early_shadow_page,0 ,PAGE_SIZE );
Quoted 8 lines
arch/powerpc/mm/kasan/init_book3s_64.c line 100
Quoted 6 lines
arch/powerpc/mm/kasan/init_book3s_64.c new file +6
-0+ +static_branch_inc (&powerpc_kasan_enabled_key); + +/* Enable error messages */ + init_task.kasan_depth =0 ; +pr_info ("KASAN init done (64-bit Book3S)\n" );Maybe mention RADIX in the printed message ?
Why? As in, who would find it useful?
Paul.
Re: [PATCH 3/3] [RFC] powerpc: Book3S 64-bit outline-only KASAN support
Le 17/05/2022 à 09:31, Paul Mackerras a écrit :
Quoted 97 lines · Christophe Leroy
Quoted 7 lines
Le 11/05/2022 à 09:28, Paul Mackerras a écrit :
Quoted 4 lines
From: Daniel Axtens <[email protected]>
Implement a limited form of KASAN for Book3S 64-bit machines running under the Radix MMU, supporting only outline mode.
[snip]
Quoted 11 lines
Quoted 11 lines
arch/powerpc/Kconfig +1
-0@@ -105,6 +105,7 @@ config PPC # Please keep this list sorted alphabetically. # select ARCH_32BIT_OFF_T if PPC32 + select ARCH_DISABLE_KASAN_INLINE if PPC_RADIX_MMU select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVEQuoted 8 lines
arch/powerpc/Kconfig config PPC · line 156
Quoted 6 lines
arch/powerpc/Kconfig +1
-0select ARCH_HAS_COPY_MC if PPC64@@ -152,6 +153,7 @@ config PPC select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_IRQS_OFF_ACTIVATE_MM select ARCH_WANT_LD_ORPHAN_WARN + select ARCH_WANTS_NO_INSTRCan you explain why we need that ?
The help text for the option says:
An architecture should select this if the noinstr macro is being used on functions to denote that the toolchain should avoid instrumenting such functions and is required for correctness.
All it really seems to do is restrict the conditions under which the GCOV and KCOV options can be enabled.
Quoted 1 line
Is it tied to KASAN ? Is yes, why didn't we have it for PPC32 until now ?
Since we really do need to avoid instrumenting certain functions on ppc64 (as in things will break if we do instrument them), I think we need to select
ARCH_WANTS_NO_INSTR.For ppc32, as far as I recall there is much less code that runs in real mode and it is mostly assembler (except for some boot code), mostly because all addresses have to be explicitly translated to physical addresses for 32-bit real-mode code, unlike ppc64 where we can use access memory in the linear mapping using virtual addresses because of the fact that the CPU ignores the top 4 bits of the effective address in real mode. That said, there is a lot less code that runs in real mode on ppc64 than there used to be.
Quoted 1 line
Maybe that's independant of KASAN and would be worth a separate patch ?
Yes, possibly, though KASAN does appear to be the only user of noinstr in
arch/powerpc.[snip]
Quoted 35 lines
Quoted 35 lines
arch/powerpc/include/asm/book3s/64/radix.h +8
-3@@ -35,6 +35,11 @@#define RADIX_PMD_SHIFT (PAGE_SHIFT + RADIX_PTE_INDEX_SIZE)#define RADIX_PUD_SHIFT (RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE)#define RADIX_PGD_SHIFT (RADIX_PUD_SHIFT + RADIX_PUD_INDEX_SIZE) + +#define R_PTRS_PER_PTE (1 << RADIX_PTE_INDEX_SIZE) +#define R_PTRS_PER_PMD (1 << RADIX_PMD_INDEX_SIZE) +#define R_PTRS_PER_PUD (1 << RADIX_PUD_INDEX_SIZE) +/* * Size of EA range mapped by our pagetables. */ @@ -68,11 +73,11 @@* * * 3rd quadrant expanded: -* +------------------------------+ +* +------------------------------+ Highest address (0xc010000000000000) +* +------------------------------+ KASAN shadow end (0xc00fc00000000000) * | | * | | -* | | -* +------------------------------+ Kernel vmemmap end (0xc010000000000000) +* +------------------------------+ Kernel vmemmap end/shadow start (0xc00e000000000000) * | | * | 512TB | * | | @@ -126,6 +131,8 @@#define RADIX_VMEMMAP_SIZE RADIX_KERN_MAP_SIZE#define RADIX_VMEMMAP_END (RADIX_VMEMMAP_START + RADIX_VMEMMAP_SIZE)
Quoted 8 lines
Quoted 4 lines
arch/powerpc/include/asm/book3s/64/radix.h line 135
Quoted 2 lines
arch/powerpc/include/asm/book3s/64/radix.h +2
-0+/* For the sizes of the shadow area, see kasan.h */ +Why does this comment pops up here ?
Do you mean, why is it there at all, or do you mean why is it in that particular place rather than closer to the "3rd quadrant expanded" diagram or something?
Why at this place mainly, I mean I can't see the relationship between the added comment and the following lines starting with a #ifndef ASSEMBLY.
If the comment is to be usefull, it should be added to a related place I guess.
Quoted 91 lines
Quoted 52 lines
Quoted 52 lines
arch/powerpc/include/asm/book3s/64/radix.h +0
-0#ifndef __ASSEMBLY__#define RADIX_PTE_TABLE_SIZE (sizeof(pte_t) << RADIX_PTE_INDEX_SIZE)#define RADIX_PMD_TABLE_SIZE (sizeof(pmd_t) << RADIX_PMD_INDEX_SIZE)arch/powerpc/include/asm/interrupt.h +28
-4@@ -327,22 +327,46 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte }#endif +/* If data relocations are enabled, it's safe to use nmi_enter() */ +if (mfmsr () &MSR_DR ) { +nmi_enter (); +return ; + } +/* -* Do not use nmi_enter() for pseries hash guest taking a real-mode +* But do not use nmi_enter() for pseries hash guest taking a real-mode * NMI because not everything it touches is within the RMA limit. */ +if (IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) && +firmware_has_feature (FW_FEATURE_LPAR ) && + !radix_enabled ()) +return ; + +/* +* Likewise, don't use it if we have some form of instrumentation (like +* KASAN shadow) that is not safe to access in real mode (even on radix) +*/ +if (IS_ENABLED (CONFIG_KASAN )) +return ; + +/* Otherwise, it should be safe to call it */ +nmi_enter (); }static inline void interrupt_nmi_exit_prepare (struct pt_regs *regs,struct interrupt_nmi_state *state) { -if (!IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) || - !firmware_has_feature (FW_FEATURE_LPAR ) || -radix_enabled () || (mfmsr () &MSR_DR )) +if (mfmsr () &MSR_DR ) { +// nmi_exit if relocations are on nmi_exit (); + }else if (IS_ENABLED (CONFIG_PPC_BOOK3S_64 ) && +firmware_has_feature (FW_FEATURE_LPAR ) && + !radix_enabled ()) { +// no nmi_exit for a pseries hash guest taking a real mode exception + }else if (IS_ENABLED (CONFIG_KASAN )) {Quoted 8 lines
arch/powerpc/include/asm/interrupt.h static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte · line 370
Quoted 5 lines
arch/powerpc/include/asm/interrupt.h +4
-0+// no nmi_exit for KASAN in real mode + }else { +nmi_exit (); + }I think all this changeset around
MSR_DRversus NMI would be worth a separate patch with a dedicated explanation.It's actually not as much of a change as it might appear. All that is really being done is to add !IS_ENABLED(CONFIG_KASAN) to the conditions for calling
nmi_enter()andnmi_exit()when the CPU is in real mode. In other words, the condition is equivalent to:if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !firmware_has_feature(FW_FEATURE_LPAR) || radix_enabled()) && !IS_ENABLED(CONFIG_KASAN)) || (mfmsr() & MSR_DR)) nmi_enter();I think the version as Daniel has transformed it is more readable though. It could be a separate patch, sure.
Quoted 10 lines
arch/powerpc/include/asm/interrupt.h static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter · line 437
Quoted 8 lines
arch/powerpc/include/asm/interrupt.h +1
-1/* * nmi does not call nap_adjust_return because nmi should not create @@ -410,7 +434,8 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter* Specific handlers may have additional restrictions. */ #define DEFINE_INTERRUPT_HANDLER_RAW (func) \ -static __always_inline long ____##func(struct pt_regs *regs); \ +static __always_inline __no_sanitize_address __no_kcsan long \Why is this required for PPC64 while it wasn't for PPC32 ?
I assume because we switch into virtual mode sooner on ppc32, because of the need to transform addresses explicitly in real mode. I haven't looked at the ppc32 interrupt code for a long time (and even the ppc64 interrupt code is now quite different from what I recall).
Quoted 5 lines
Quoted 1 line
Any side effect on PPC32 ?
I suppose you won't get KASAN coverage of those interrupt handling functions, where you did previously. Do you want me to make the "
__no_sanitize_address__no_kcsan" apply only on ppc64?
No, I think that should be OK for PPC32 as well now that you explained what it really does.
Quoted 27 lines
[snip]
Quoted 12 lines
Quoted 12 lines
arch/powerpc/include/asm/kasan.h +2
-0@@ -30,9 +30,31 @@#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET) +#ifdef CONFIG_PPC32 #define KASAN_SHADOW_END (-(-KASAN_SHADOW_START >> KASAN_SHADOW_SCALE_SHIFT)) +#endif Quoted 11 lines
arch/powerpc/include/asm/kasan.h line 44
Quoted 8 lines
arch/powerpc/include/asm/kasan.h +7
-0#ifdef CONFIG_KASAN +#ifdef CONFIG_PPC_BOOK3S_64 +/* +* The shadow ends before the highest accessible address +* because we don't need a shadow for the shadow. Instead: +* c00e000000000000 << 3 + a80e000000000000 = c00fc00000000000 +*/ +#define KASAN_SHADOW_END 0xc00fc00000000000ULWould be easer to read if we could group that with PPC32 in a #ifdef/#else/#endif
Quoted 2 lines
Sure. It's a bit weird that
KASAN_SHADOW_ENDis always defined for ppc32, but only ifCONFIG_KASAN=yfor ppc64. I'll fix it.
Thanks
Quoted 146 lines
[snip]
Quoted 67 lines
Quoted 52 lines
arch/powerpc/kernel/Makefile +11
-0@@ -33,6 +33,17 @@ KASAN_SANITIZE_early_32.o := n KASAN_SANITIZE_cputable.o := n KASAN_SANITIZE_prom_init.o := n KASAN_SANITIZE_btext.o := n +KASAN_SANITIZE_paca.o := n +KASAN_SANITIZE_setup_64.o := n +KASAN_SANITIZE_mce.o := n +KASAN_SANITIZE_mce_power.o := n + +# we have to be particularly careful in ppc64 to exclude code that +# runs with translations off, as we cannot access the shadow with +# translations off. However, ppc32 can sanitize this. +ifdef CONFIG_PPC64 +KASAN_SANITIZE_traps.o := n +endif ifdef CONFIG_KASAN CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILINGarch/powerpc/kernel/process.c +6
-5@@ -2220,8 +2220,8 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,break ; stack = (unsigned long *) sp; - newsp = stack[0 ]; - ip = stack[STACK_FRAME_LR_SAVE ]; + newsp =READ_ONCE_NOCHECK (stack[0 ]); + ip =READ_ONCE_NOCHECK (stack[STACK_FRAME_LR_SAVE ]);if (!firstframe || ip != lr) {printk ("%s[" REG "] [" REG "] %pS" , loglvl, sp, ip, (void *)ip);@@ -2239,17 +2239,19 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,* See if this is an exception frame. * We look for the "regshere" marker in the current frame. */ -if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) - && stack[STACK_FRAME_MARKER ] ==STACK_FRAME_REGS_MARKER ) { +if (validate_sp (sp, tsk,STACK_FRAME_WITH_PT_REGS ) && + (READ_ONCE_NOCHECK (stack[STACK_FRAME_MARKER ]) == +STACK_FRAME_REGS_MARKER )) {struct pt_regs *regs = (struct pt_regs *) (sp +STACK_FRAME_OVERHEAD ); - lr = regs->link; + lr =READ_ONCE_NOCHECK (regs->link); printk("%s--- interrupt: %lx at %pS\n",arch/powerpc/kernel/process.c void __no_sanitize_address show_stack(struct task_struct *tsk, · line 2257
Quoted 10 lines
arch/powerpc/kernel/process.c +3
-2- loglvl, regs->trap, (void *)regs->nip); + loglvl,READ_ONCE_NOCHECK (regs->trap), + (void *)READ_ONCE_NOCHECK(regs->nip));__show_regs (regs);printk ("%s--- interrupt: %lx\n" , - loglvl, regs->trap); + loglvl,READ_ONCE_NOCHECK (regs->trap)); firstframe =1 ; }This change we submitted as a standalone patch and was rejected as is, see
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/Quoted 5 lines
v2 was accepted, see
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/Therefore AFAIU this change is redundant with the accepted v2 and should be dropped.
OK, thanks for the history. I'll drop this change.
Quoted 42 lines
Quoted 42 lines
arch/powerpc/kernel/smp.c +9
-9@@ -413,32 +413,32 @@ static struct cpumask nmi_ipi_pending_mask;static bool nmi_ipi_busy = false;static void (*nmi_ipi_function)(struct pt_regs *) =NULL ; -static void nmi_ipi_lock_start (unsigned long *flags) +noinstr static void nmi_ipi_lock_start(unsigned long *flags) {raw_local_irq_save (*flags);hard_irq_disable (); -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) { +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) {raw_local_irq_restore (*flags); -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 );raw_local_irq_save (*flags);hard_irq_disable (); } } -static void nmi_ipi_lock (void ) +noinstr static void nmi_ipi_lock(void) { -while (atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) -spin_until_cond (atomic_read (&__nmi_ipi_lock) ==0 ); +while (arch_atomic_cmpxchg (&__nmi_ipi_lock,0 ,1 ) ==1 ) +spin_until_cond (arch_atomic_read (&__nmi_ipi_lock) ==0 ); } -static void nmi_ipi_unlock (void ) +noinstr static void nmi_ipi_unlock(void) {smp_mb (); -WARN_ON (atomic_read (&__nmi_ipi_lock) !=1 ); -atomic_set (&__nmi_ipi_lock,0 ); +WARN_ON (arch_atomic_read (&__nmi_ipi_lock) !=1 ); +arch_atomic_set (&__nmi_ipi_lock,0 ); }Quoted 16 lines
Quoted 6 lines
arch/powerpc/kernel/smp.c +1
-1-static void nmi_ipi_unlock_end (unsigned long *flags) +noinstr static void nmi_ipi_unlock_end(unsigned long *flags) {nmi_ipi_unlock ();raw_local_irq_restore (*flags);arch/powerpc/kernel/smp.c static void nmi_ipi_unlock_end(unsigned long *flags) · line 453
Quoted 8 lines
arch/powerpc/kernel/smp.c +1
-1@@ -447,7 +447,7 @@ static void nmi_ipi_unlock_end(unsigned long *flags)/* * Platform NMI handler calls this to ack */ -int smp_handle_nmi_ipi (struct pt_regs *regs) +noinstr int smp_handle_nmi_ipi(struct pt_regs *regs) {void (*fn)(struct pt_regs *) =NULL ;unsigned long flags;Can you explain those changes from
atomic_xxxtoarch_atomic_xxx?With KASAN enabled,
atomic_read()and similar functions become wrappers which explicitly call KASAN checking functions. Seeinclude/linux/atomic/atomic-instrumented.handinclude/linux/instrumented.h. Since we don't want those NMI functions instrumented, we have to use the arch_atomic_* functions so as to avoid getting the explicit instrumentation calls. As to why we don't want instrumentation here, it's because we want to avoid crashing when doing kexec or more particularly kdump, I believe.
Quoted 3 lines
Quoted 1 line
Should it be a separate patch ?
Could be - matter of taste I guess.
Well, this patch being quite big it's usually appreciable to get it split with some preparation patches, that's the way we do usually, I remember when I submitted the series to Switch to CONFIG_THREAD_INFO_IN_TASK, there was already half a dozen of preparation patches and Michael split them into several more.
Quoted 159 lines
[snip]
Quoted 6 lines
Quoted 6 lines
arch/powerpc/mm/book3s64/Makefile +0
-0@@ -24,3 +24,12 @@ obj-$(CONFIG_PPC_PKEY) += pkeys.oQuoted 8 lines
arch/powerpc/mm/book3s64/Makefile obj-$(CONFIG_PPC_PKEY) += pkeys.o · line 29
Quoted 5 lines
arch/powerpc/mm/book3s64/Makefile +3
-0# Instrumenting the SLB fault path can lead to duplicate SLB entries KCOV_INSTRUMENT_slb.o := n + +# Parts of these can run in real mode and therefore are +# not safe with the current outline KASAN implementationBut are we not safe about KASAN being disabled when in real mode ? Isn't it the purpose of
kasan_arch_is_ready?We have not added
kasan_arch_is_ready()checks to all of the KASAN entry points, only those that are called early in boot before KASAN has been initialized, as I found out when I changedkasan_init()to just return without doing anything if radix is not enabled. On POWER8, the kernel crashed shortly afterwards in generic KASAN code that didn't have akasan_arch_is_ready()call in it.As to whether we should add such calls to every entry point in the generic KASAN code -- it would probably be a good idea to do that, though a bit fragile in the long term because people will add stuff to the generic KASAN code without realizing there needs to be the guard, since their architecture won't need it.
In the really long term, hopefully we can eventually drop HPT and get to the point where practically nothing runs in real mode. That's a fair way off though.
Quoted 115 lines
Quoted 115 lines
arch/powerpc/mm/book3s64/Makefile +6
-0+KASAN_SANITIZE_mmu_context.o := n +KASAN_SANITIZE_pgtable.o := n +KASAN_SANITIZE_radix_pgtable.o := n +KASAN_SANITIZE_radix_tlb.o := n +KASAN_SANITIZE_slb.o := n +KASAN_SANITIZE_pkeys.o := narch/powerpc/mm/kasan/Makefile +1
-0@@ -5,3 +5,4 @@ KASAN_SANITIZE := n obj-$(CONFIG_PPC32) += init_32.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_BOOK3S_32) += book3s_32.o +obj-$(CONFIG_PPC_BOOK3S_64) += init_book3s_64.oarch/powerpc/mm/kasan/init_book3s_64.c new file +94
-0@@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* KASAN for 64-bit Book3S powerpc +* +* Copyright (C) 2019-2020 IBM Corporation +* Author: Daniel Axtens <[email protected]> +*/ + +/* +# ppc64 turns on virtual memory late in boot, after calling into generic code +# like the device-tree parser, so it uses this in conjunction with a hook in +# outline mode to avoid invalid access early in boot. +*/ + +#define DISABLE_BRANCH_PROFILING + +#include <linux/kasan.h> +#include <linux/printk.h> +#include <linux/sched/task.h> +#include <linux/memblock.h> +#include <asm/pgalloc.h> + +DEFINE_STATIC_KEY_FALSE (powerpc_kasan_enabled_key); + +static void __init kasan_init_phys_region (void *start,void *end) +{ +unsigned long k_start, k_end, k_cur; +void *va; + +if (start >= end) +return ; + + k_start =ALIGN_DOWN ((unsigned long )kasan_mem_to_shadow (start),PAGE_SIZE ); + k_end =ALIGN ((unsigned long )kasan_mem_to_shadow (end),PAGE_SIZE ); + + va =memblock_alloc (k_end - k_start,PAGE_SIZE ); +for (k_cur = k_start; k_cur < k_end; k_cur +=PAGE_SIZE , va +=PAGE_SIZE ) +map_kernel_page (k_cur,__pa (va),PAGE_KERNEL ); +} + +void __init kasan_init (void ) +{ +/* +* We want to do the following things: +* 1) Map real memory into the shadow for all physical memblocks +* This takes us from c000... to c008... +* 2) Leave a hole over the shadow of vmalloc space. KASAN_VMALLOC +* will manage this for us. +* This takes us from c008... to c00a... +* 3) Map the 'early shadow'/zero page over iomap and vmemmap space. +* This takes us up to where we start at c00e... +*/ + +void *k_start =kasan_mem_to_shadow ((void *)RADIX_VMALLOC_END ); +void *k_end =kasan_mem_to_shadow ((void *)RADIX_VMEMMAP_END ); +phys_addr_t start, end; +u64 i; +pte_t zero_pte =pfn_pte (virt_to_pfn (kasan_early_shadow_page),PAGE_KERNEL ); + +if (!early_radix_enabled ()) { +pr_warn ("KASAN not enabled as it requires radix!" ); +return ; + } + +for_each_mem_range (i, &start, &end) +kasan_init_phys_region ((void *)start, (void *)end); + +for (i =0 ; i <PTRS_PER_PTE ; i++) +__set_pte_at (&init_mm, (unsigned long )kasan_early_shadow_page, + &kasan_early_shadow_pte[i], zero_pte,0 ); + +for (i =0 ; i <PTRS_PER_PMD ; i++) +pmd_populate_kernel (&init_mm, &kasan_early_shadow_pmd[i], + kasan_early_shadow_pte); + +for (i =0 ; i <PTRS_PER_PUD ; i++) +pud_populate (&init_mm, &kasan_early_shadow_pud[i], + kasan_early_shadow_pmd); + +/* map the early shadow over the iomap and vmemmap space */ +kasan_populate_early_shadow (k_start, k_end); + +/* mark early shadow region as RO and wipe it */ + zero_pte =pfn_pte (virt_to_pfn (kasan_early_shadow_page),PAGE_KERNEL_RO ); +for (i =0 ; i <PTRS_PER_PTE ; i++) +__set_pte_at (&init_mm, (unsigned long )kasan_early_shadow_page, + &kasan_early_shadow_pte[i], zero_pte,0 ); + +/* +* clear_page relies on some cache info that hasn't been set up yet. +* It ends up looping ~forever and blows up other data. +* Use memset instead. +*/ +memset (kasan_early_shadow_page,0 ,PAGE_SIZE );Quoted 8 lines
arch/powerpc/mm/kasan/init_book3s_64.c line 100
Quoted 6 lines
arch/powerpc/mm/kasan/init_book3s_64.c new file +6
-0+ +static_branch_inc (&powerpc_kasan_enabled_key); + +/* Enable error messages */ + init_task.kasan_depth =0 ; +pr_info ("KASAN init done (64-bit Book3S)\n" );Maybe mention RADIX in the printed message ?
Quoted 1 line
Why? As in, who would find it useful?
Don't know. Is it usefull to mention 64-bit Book3S at all then ?
Christophe
Le 11/05/2022 à 09:25, Paul Mackerras a écrit :
Quoted 12 lines
[Vous ne recevez pas souvent de courriers de la part de [email protected]. D?couvrez pourquoi cela peut ?tre important ? l'adresse https://aka.ms/LearnAboutSenderIdentification.]
This patch series implements KASAN on 64-bit POWER with radix MMU, such as POWER9 or POWER10. Daniel Axtens posted previous versions of these patches, but is no longer working on KASAN, and I have been asked to get them ready for inclusion.
Because of various technical difficulties, mostly around the need to allow for code that runs in real mode, we only support "outline" mode (as opposed to "inline" mode), where the compiler adds a call to a checking procedure before every store to memory.
Quoted 8 lines
The main patch is still marked [RFC] because of known deficiencies, specifically that the kernel will crash on boot on a HPT system, and that out-of-bounds accesses to module global data are not caught (which leads to one of the KASAN tests failing).
Comments welcome. I may not have addressed all the comments about previous versions of these patches; if so, then please just repeat your comments.
Last patch is quite big. I think it would be worth splitting in several patches. A made a few suggestions while reviewing it. I think it could also be worth putting all the adding of no_instr and KASAN_SANITIZE := n in a preparatory patch.
Also, your last patch includes v1 of "powerpc: make stack walking KASAN-safe"
(https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/)
while v2 was merged
(https://patchwork.ozlabs.org/project/linuxppc-dev/patch/[email protected]/)
Christophe