Skip to contentSkip to conversation

mv88e6xxx: fixes for reading serdes state

PATCH Applied Russell King (Oracle) 3 participants 5 messages Jun 7, 2022 – Jun 9, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover mv88e6xxx: fixes for reading serdes state

Hi,

These are some low-priority fixes to the mv88e6xxx serdes code. Patch 1 fixes the reporting of an_complete, which is used in the emulation of a conventional C22 PHY. Patch from Marek.

Patch 2 makes one of the error messages in patch 2 to be consistent with the other error messages in this function.

Patch 3 ensures that we do not miss a link-failure event.

 drivers/net/dsa/mv88e6xxx/serdes.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
#1 lore raw

PATCH 1/3 net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete

From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <[email protected]>

Commit ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") added the ability to link if AN was bypassed, and added filling of state->an_complete field, but set it to true if AN was enabled in BMCR, not when AN was reported complete in BMSR.

This was done because for some reason, when I wanted to use BMSR value to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was always 1), instead of BMSR_ANEGCOMPLETE bit.

Use BMSR_ANEGCOMPLETE for filling state->an_complete.

Fixes ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed")
---
 drivers/net/dsa/mv88e6xxx/serdes.c | 27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)
drivers/net/dsa/mv88e6xxx/serdes.c +11 -16
index 7b37d45bc9fb..1a19c5284f2c 100644
@@ -50,22 +50,17 @@ static int mv88e6390_serdes_write(struct mv88e6xxx_chip *chip,
 }
 
 static int mv88e6xxx_serdes_pcs_get_state(struct mv88e6xxx_chip *chip,
-					  u16 ctrl, u16 status, u16 lpa,
+					  u16 bmsr, u16 lpa, u16 status,
 					  struct phylink_link_state *state)
 {
 	state->link = !!(status & MV88E6390_SGMII_PHY_STATUS_LINK);
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
 
 	if (status & MV88E6390_SGMII_PHY_STATUS_SPD_DPL_VALID) {
 		/* The Spped and Duplex Resolved register is 1 if AN is enabled
 		 * and complete, or if AN is disabled. So with disabled AN we
-		 * still get here on link up. But we want to set an_complete
-		 * only if AN was enabled, thus we look at BMCR_ANENABLE.
-		 * (According to 802.3-2008 section 22.2.4.2.10, we should be
-		 *  able to get this same value from BMSR_ANEGCAPABLE, but tests
-		 *  show that these Marvell PHYs don't conform to this part of
-		 *  the specificaion - BMSR_ANEGCAPABLE is simply always 1.)
+		 * still get here on link up.
 		 */
-		state->an_complete = !!(ctrl & BMCR_ANENABLE);
 		state->duplex = status &
 				MV88E6390_SGMII_PHY_STATUS_DUPLEX_FULL ?
 			                         DUPLEX_FULL : DUPLEX_HALF;
@@ -191,12 +186,12 @@ int mv88e6352_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 				   int lane, struct phylink_link_state *state)
 {
-	u16 lpa, status, ctrl;
+	u16 bmsr, lpa, status;
 	int err;
 
-	err = mv88e6352_serdes_read(chip, MII_BMCR, &ctrl);
+	err = mv88e6352_serdes_read(chip, MII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes PHY control: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes BMSR: %d\n", err);
 		return err;
 	}
 
@@ -212,7 +207,7 @@ int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 		return err;
 	}
 
-	return mv88e6xxx_serdes_pcs_get_state(chip, ctrl, status, lpa, state);
+	return mv88e6xxx_serdes_pcs_get_state(chip, bmsr, lpa, status, state);
 }
 
 int mv88e6352_serdes_pcs_an_restart(struct mv88e6xxx_chip *chip, int port,
@@ -918,13 +913,13 @@ int mv88e6390_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 static int mv88e6390_serdes_pcs_get_state_sgmii(struct mv88e6xxx_chip *chip,
 	int port, int lane, struct phylink_link_state *state)
 {
-	u16 lpa, status, ctrl;
+	u16 bmsr, lpa, status;
 	int err;
 
 	err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
-				    MV88E6390_SGMII_BMCR, &ctrl);
+				    MV88E6390_SGMII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes PHY control: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes PHY BMSR: %d\n", err);
 		return err;
 	}
 
@@ -942,7 +937,7 @@ static int mv88e6390_serdes_pcs_get_state_sgmii(struct mv88e6xxx_chip *chip,
 		return err;
 	}
 
-	return mv88e6xxx_serdes_pcs_get_state(chip, ctrl, status, lpa, state);
+	return mv88e6xxx_serdes_pcs_get_state(chip, bmsr, lpa, status, state);
 }
 
 static int mv88e6390_serdes_pcs_get_state_10g(struct mv88e6xxx_chip *chip,
Signature · 1 line
2.30.2
#2 lore raw

PATCH 2/3 net: dsa: mv88e6xxx: fix BMSR error to be consistent with others

In reply to Russell King (Oracle)

Other errors accessing the registers in mv88e6352_serdes_pcs_get_state() print "PHY " before the register name, except for the BMSR. Make this consistent with the other error messages.

---
 drivers/net/dsa/mv88e6xxx/serdes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/dsa/mv88e6xxx/serdes.c +1 -1
index 1a19c5284f2c..47bf87d530b0 100644
@@ -191,7 +191,7 @@ int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 
 	err = mv88e6352_serdes_read(chip, MII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes BMSR: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes PHY BMSR: %d\n", err);
 		return err;
 	}
 
Signature · 1 line
2.30.2
#3 lore raw

PATCH 3/3 net: dsa: mv88e6xxx: correctly report serdes link failure

In reply to Russell King (Oracle)

Phylink wants to know if the link has dropped since the last time state was retrieved, and the BMSR gives us that. Read the BMSR and use it when deciding the link state. Fill in the an_complete member as well for the emulated PHY state.

---
 drivers/net/dsa/mv88e6xxx/serdes.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/net/dsa/mv88e6xxx/serdes.c +8 -0
index 47bf87d530b0..d94150d8f3f4 100644
@@ -53,6 +53,14 @@ static int mv88e6xxx_serdes_pcs_get_state(struct mv88e6xxx_chip *chip,
 					  u16 bmsr, u16 lpa, u16 status,
 					  struct phylink_link_state *state)
 {
+	state->link = false;
+
+	/* If the BMSR reports that the link had failed, report this to
+	 * phylink.
+	 */
+	if (!(bmsr & BMSR_LSTATUS))
+		return 0;
+
 	state->link = !!(status & MV88E6390_SGMII_PHY_STATUS_LINK);
 	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
 
Signature · 1 line
2.30.2
#4 lore raw
In reply to Russell King (Oracle)
This series was applied to netdev/net.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net.git (master) by Jakub Kicinski <[email protected]>:

Quoted 10 lines · On Tue, 7 Jun 2022 12:28:15 +0100 you wrote:

Hi,

These are some low-priority fixes to the mv88e6xxx serdes code. Patch 1 fixes the reporting of an_complete, which is used in the emulation of a conventional C22 PHY. Patch from Marek.

Patch 2 makes one of the error messages in patch 2 to be consistent with the other error messages in this function.

[...]

Here is the summary with links:
- [net,1/3] net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete

    https://git.kernel.org/netdev/net/c/47e96930d6e6
  - [net,2/3] net: dsa: mv88e6xxx: fix BMSR error to be consistent with others
    https://git.kernel.org/netdev/net/c/2b4bb9cd9bcd
  - [net,3/3] net: dsa: mv88e6xxx: correctly report serdes link failure
    https://git.kernel.org/netdev/net/c/b4d78731b34b

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html