Skip to contentSkip to conversation

usb: dwc3: core: fix some leaks in probe

PATCH New Dan Carpenter 1 participant 1 message Sep 22, 2022

Subsystems (3)
USB Kernel janitors DesignWare USB3 DRD IP driver
lore
Share & tools
lore

Dan Carpenter

author
#0 lore raw

PATCH 1/1 usb: dwc3: core: fix some leaks in probe

The dwc3_get_properties() function calls:

	dwc->usb_psy = power_supply_get_by_name(usb_psy_name);

so there is some additional clean up required on these error paths.

Fixes 6f0764b5adea ("usb: dwc3: add a power supply for current control")
Signed-off-by Dan Carpenter <[email protected]>
---
 drivers/usb/dwc3/core.c | 58 +++++++++++++++++++++++++----------------
 1 file changed, 36 insertions(+), 22 deletions(-)
drivers/usb/dwc3/core.c +36 -22
index 656bbf9285a5..92b5fea9fe3e 100644
@@ -1753,8 +1753,10 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc3_get_properties(dwc);
 
 	dwc->reset = devm_reset_control_array_get_optional_shared(dev);
-	if (IS_ERR(dwc->reset))
-		return PTR_ERR(dwc->reset);
+	if (IS_ERR(dwc->reset)) {
+		ret = PTR_ERR(dwc->reset);
+		goto put_usb_psy;
+	}
 
 	if (dev->of_node) {
 		/*

@@ -1764,45 +1766,57 @@ static int dwc3_probe(struct platform_device *pdev)
 		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
-		if (IS_ERR(dwc->bus_clk))
-			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
-					     "could not get bus clock\n");
+		if (IS_ERR(dwc->bus_clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+					    "could not get bus clock\n");
+			goto put_usb_psy;
+		}
 
 		if (dwc->bus_clk == NULL) {
 			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
-			if (IS_ERR(dwc->bus_clk))
-				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
-						     "could not get bus clock\n");
+			if (IS_ERR(dwc->bus_clk)) {
+				ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						    "could not get bus clock\n");
+				goto put_usb_psy;
+			}
 		}
 
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
-		if (IS_ERR(dwc->ref_clk))
-			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
-					     "could not get ref clock\n");
+		if (IS_ERR(dwc->ref_clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+					    "could not get ref clock\n");
+			goto put_usb_psy;
+		}
 
 		if (dwc->ref_clk == NULL) {
 			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
-			if (IS_ERR(dwc->ref_clk))
-				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
-						     "could not get ref clock\n");
+			if (IS_ERR(dwc->ref_clk)) {
+				ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						    "could not get ref clock\n");
+				goto put_usb_psy;
+			}
 		}
 
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
-		if (IS_ERR(dwc->susp_clk))
-			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
-					     "could not get suspend clock\n");
+		if (IS_ERR(dwc->susp_clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+					    "could not get suspend clock\n");
+			goto put_usb_psy;
+		}
 
 		if (dwc->susp_clk == NULL) {
 			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
-			if (IS_ERR(dwc->susp_clk))
-				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
-						     "could not get suspend clock\n");
+			if (IS_ERR(dwc->susp_clk)) {
+				ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						    "could not get suspend clock\n");
+				goto put_usb_psy;
+			}
 		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);
 	if (ret)
-		return ret;
+		goto put_usb_psy;
 
 	ret = dwc3_clk_enable(dwc);
 	if (ret)

@@ -1909,7 +1923,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc3_clk_disable(dwc);
 assert_reset:
 	reset_control_assert(dwc->reset);
-
+put_usb_psy:
 	if (dwc->usb_psy)
 		power_supply_put(dwc->usb_psy);
Signature · 1 line
2.35.1