lockdep: Fix static memory detection even more
Subsystems (5)
Helge Deller
maintainerPATCH 1/1 lockdep: Fix static memory detection even more
On the parisc architecture, lockdep reports for all static objects which are in the __initdata section (e.g. "setup_done" in devtmpfs, "kthreadd_done" in init/main.c) this warning:
INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the __initdata section, but the section itself is on parisc outside of range from _stext to _end, which is why the static_obj() functions returns a wrong answer.
While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the _stext and _end symbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existing is_kernel_core_data() macro.
In addition objects in the __initdata section can be checked with init_section_contains().
This partly reverts and simplifies commit bac59d18c701 ("x86/setup: Fix static memory detection").
Tested on x86-64 and parisc.
---
arch/x86/include/asm/sections.h +0 -18
@@ -2,8 +2,6 @@#ifndef _ASM_X86_SECTIONS_H#define _ASM_X86_SECTIONS_H -#define arch_is_kernel_initmem_freed arch_is_kernel_initmem_freed -#include <asm-generic/sections.h> #include <asm/extable.h>
@@ -18,20 +16,4 @@ extern char __end_of_kernel_reserve[];extern unsigned long _brk_start, _brk_end; -static inline bool arch_is_kernel_initmem_freed (unsigned long addr) -{ -/* -* If _brk_start has not been cleared, brk allocation is incomplete, -* and we can not make assumptions about its use. -*/ -if (_brk_start) -return 0 ; - -/* -* After brk allocation is complete, space between _brk_end and _end -* is available for allocation. -*/ -return addr >= _brk_end && addr < (unsigned long )&_end; -} -#endif /* _ASM_X86_SECTIONS_H */
kernel/locking/lockdep.c +8 -22
@@ -819,34 +819,20 @@ static int very_verbose(struct lock_class *class)* Is this the address of a static object: */ #ifdef __KERNEL__ -/* -* Check if an address is part of freed initmem. After initmem is freed, -* memory can be allocated from it, and such allocations would then have -* addresses within the range [_stext, _end]. -*/ -#ifndef arch_is_kernel_initmem_freed -static int arch_is_kernel_initmem_freed (unsigned long addr) -{ -if (system_state <SYSTEM_FREEING_INITMEM ) -return 0 ; - -return init_section_contains ((void *)addr,1 ); -} -#endif -static int static_obj (const void *obj) { -unsigned long start = (unsigned long ) &_stext, - end = (unsigned long ) &_end, - addr = (unsigned long ) obj; +unsigned long addr = (unsigned long ) obj; -if (arch_is_kernel_initmem_freed (addr)) -return 0 ; +if (is_kernel_core_data (addr)) +return 1 ;/* -* static variable? +* in initdata section and used during bootup only? +* NOTE: On some platforms the initdata section is +* outside of the _stext ... _end range. */ -if ((addr >= start) && (addr < end)) +if (system_state <SYSTEM_FREEING_INITMEM && +init_section_contains ((void *)addr,1 ))return 1 ;/*
kernel test robot
build botkernel test robot noticed "BUG:key#has_not_been_registered" on:
Hello,
kernel test robot noticed "BUG:key#has_not_been_registered" on:
commit: 94d4413e506da48ea18f1cc982202874d35c76b1 ("[PATCH] lockdep: Fix static memory detection even more")
url: https://github.com/intel-lab-lkp/linux/commits/Helge-Deller/lockdep-Fix-static-memory-detection-even-more/20230812-235022
base: https://git.kernel.org/cgit/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/all/ZNep5EcYskP9HtGD@p100/
patch subject: [PATCH] lockdep: Fix static memory detection even more
in testcase: boot
compiler: gcc-12
test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
(please refer to attached dmesg/kmsg for entire log/backtrace)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-lkp/[email protected]
[ 0.575811][ T1] BUG: key b35c282c has not been registered! [ 0.576580][ T1] ------------[ cut here ]------------ [ 0.577216][ T1] DEBUG_LOCKS_WARN_ON(1) [ 0.577236][ T1] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4888 lockdep_init_map_type+0x155/0x250 [ 0.578389][ T1] Modules linked in: [ 0.578856][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc4-00587-g94d4413e506d #2 [ 0.579899][ T1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 0.581143][ T1] EIP: lockdep_init_map_type+0x155/0x250 [ 0.581677][ T1] Code: 70 a2 51 b4 85 db 75 ab e8 78 79 80 00 85 c0 74 a2 8b 0d 98 0a d4 b3 85 c9 75 98 68 59 2a 3b b3 68 8a ce 36 b3 e8 2b 7a f8 ff <0f> 0b 58 5a eb 83 8d 74 26 00 90 e8 4b 79 80 00 85 c0 0f 84 71 ff [ 0.584028][ T1] EAX: 00000016 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 0.584881][ T1] ESI: b3384ac4 EDI: b35c282c EBP: b67fbe58 ESP: b67fbe44 [ 0.585009][ T1] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010286 [ 0.585927][ T1] CR0: 80050033 CR2: ff999000 CR3: 03f25000 CR4: 000406d0 [ 0.586773][ T1] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.587629][ T1] DR6: fffe0ff0 DR7: 00000400 [ 0.588198][ T1] Call Trace: [ 0.588344][ T1] ? show_regs+0x74/0x80 [ 0.588860][ T1] ? lockdep_init_map_type+0x155/0x250 [ 0.589521][ T1] ? __warn+0x71/0x160 [ 0.590011][ T1] ? lockdep_init_map_type+0x155/0x250 [ 0.590684][ T1] ? report_bug+0x158/0x180 [ 0.591242][ T1] ? exc_overflow+0x40/0x40 [ 0.591677][ T1] ? handle_bug+0x2a/0x50 [ 0.592202][ T1] ? exc_invalid_op+0x25/0x70 [ 0.592749][ T1] ? handle_exception+0x14d/0x14d [ 0.593337][ T1] ? exc_overflow+0x40/0x40 [ 0.593881][ T1] ? lockdep_init_map_type+0x155/0x250 [ 0.594502][ T1] ? exc_overflow+0x40/0x40 [ 0.595011][ T1] ? lockdep_init_map_type+0x155/0x250 [ 0.595653][ T1] __kernfs_create_file+0x6a/0xe0 [ 0.596244][ T1] sysfs_add_bin_file_mode_ns+0x4e/0xc0 [ 0.596891][ T1] sysfs_create_bin_file+0x5c/0x90 [ 0.597496][ T1] ? nsproxy_cache_init+0x30/0x30 [ 0.598090][ T1] ksysfs_init+0x5c/0x90 [ 0.598350][ T1] ? nsproxy_cache_init+0x30/0x30 [ 0.598935][ T1] do_one_initcall+0x5b/0x2f0 [ 0.599480][ T1] ? parse_args+0x1f3/0x350 [ 0.600028][ T1] do_initcalls+0xe4/0x1e0 [ 0.600558][ T1] kernel_init_freeable+0x171/0x2a0 [ 0.601187][ T1] ? rest_init+0x1b0/0x1b0 [ 0.601677][ T1] kernel_init+0x17/0x1b0 [ 0.602193][ T1] ret_from_fork+0x35/0x50 [ 0.602714][ T1] ? rest_init+0x1b0/0x1b0 [ 0.603235][ T1] ret_from_fork_asm+0x12/0x20 [ 0.603812][ T1] entry_INT80_32+0x10d/0x10d [ 0.604359][ T1] irq event stamp: 7609 [ 0.604842][ T1] hardirqs last enabled at (7609): [<b1114e0e>] __up_console_sem+0x5e/0x80 [ 0.605011][ T1] hardirqs last disabled at (7608): [<b1114df5>] __up_console_sem+0x45/0x80 [ 0.606012][ T1] softirqs last enabled at (7260): [<b27a3d23>] __do_softirq+0x2a3/0x3a8 [ 0.607008][ T1] softirqs last disabled at (7229): [<b102f2e6>] do_softirq_own_stack+0x26/0x30 [ 0.608086][ T1] ---[ end trace 0000000000000000 ]---
The kernel config and materials to reproduce are available at:
https://download.01.org/0day-ci/archive/20230814/[email protected]
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Peter Zijlstra
maintainerQuoted 35 lines · kernel test robot
Hello,
kernel test robot noticed "BUG:key#has_not_been_registered" on:
commit:
94d4413e506da48ea18f1cc982202874d35c76b1("[PATCH] lockdep: Fix static memory detection even more")
url: https://github.com/intel-lab-lkp/linux/commits/Helge-Deller/lockdep-Fix-static-memory-detection-even-more/20230812-235022
base: https://git.kernel.org/cgit/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/all/ZNep5EcYskP9HtGD@p100/
patch subject: [PATCH] lockdep: Fix static memory detection even morein testcase: boot
compiler: gcc-12
test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G(please refer to attached dmesg/kmsg for entire log/backtrace)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-lkp/[email protected][ 0.575811][ T1] BUG: key b35c282c has not been registered! [ 0.576580][ T1] ------------[ cut here ]------------ [ 0.577216][ T1] DEBUG_LOCKS_WARN_ON(1) [ 0.577236][ T1] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4888 lockdep_init_map_type+0x155/0x250 [ 0.578389][ T1] Modules linked in: [ 0.578856][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc4-00587-g94d4413e506d #2
Quoted 5 lines
[ 0.595653][ T1] __kernfs_create_file+0x6a/0xe0 [ 0.596244][ T1] sysfs_add_bin_file_mode_ns+0x4e/0xc0 [ 0.596891][ T1] sysfs_create_bin_file+0x5c/0x90 [ 0.597496][ T1] ? nsproxy_cache_init+0x30/0x30 [ 0.598090][ T1] ksysfs_init+0x5c/0x90
Problem seems to be __ro_after_init. Your patch only considers is_kernel_core_data(), which seems to not include these other fancy data sections we have.
Helge Deller
maintainerQuoted 42 lines · Peter Zijlstra
Quoted 35 lines · kernel test robot
Hello,
kernel test robot noticed "BUG:key#has_not_been_registered" on:
commit:
94d4413e506da48ea18f1cc982202874d35c76b1("[PATCH] lockdep: Fix static memory detection even more")
url: https://github.com/intel-lab-lkp/linux/commits/Helge-Deller/lockdep-Fix-static-memory-detection-even-more/20230812-235022
base: https://git.kernel.org/cgit/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/all/ZNep5EcYskP9HtGD@p100/
patch subject: [PATCH] lockdep: Fix static memory detection even morein testcase: boot
compiler: gcc-12
test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G(please refer to attached dmesg/kmsg for entire log/backtrace)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-lkp/[email protected][ 0.575811][ T1] BUG: key b35c282c has not been registered! [ 0.576580][ T1] ------------[ cut here ]------------ [ 0.577216][ T1] DEBUG_LOCKS_WARN_ON(1) [ 0.577236][ T1] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4888 lockdep_init_map_type+0x155/0x250 [ 0.578389][ T1] Modules linked in: [ 0.578856][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc4-00587-g94d4413e506d #2Quoted 5 lines
[ 0.595653][ T1] __kernfs_create_file+0x6a/0xe0 [ 0.596244][ T1] sysfs_add_bin_file_mode_ns+0x4e/0xc0 [ 0.596891][ T1] sysfs_create_bin_file+0x5c/0x90 [ 0.597496][ T1] ? nsproxy_cache_init+0x30/0x30 [ 0.598090][ T1] ksysfs_init+0x5c/0x90
Quoted 3 lines
Problem seems to be
__ro_after_init. Your patch only considersis_kernel_core_data(), which seems to not include these other fancy data sections we have.
Thanks for that hint!
So, adding "if (is_kernel_rodata(addr))..."
I'll test and send a new patch.
Helge
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().
Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")
On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services
[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #1 [ 0.000000] Stack : 0000000000000000 0000000000000000 9000000000223d6c 9000000001df0000 [ 0.000000] 9000000001df39a0 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 9000000001df39a8 0000000000000001 0000000000000000 900000000154b910 [ 0.000000] fffffffffffffffe 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 0000000000000001 0000000000000003 0000000000000010 0000000000000030 [ 0.000000] 0000000000000063 0000000000000001 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 9000000001c60650 9000000001e12000 [ 0.000000] 0000000000000000 9000000001560bc0 0000000000000000 9000000002ee6000 [ 0.000000] 0000000000000000 0000000000000000 9000000000223d84 0000000000000000 [ 0.000000] 00000000000000b0 0000000000000004 0000000000000000 0000000000000800 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4
Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Guenter
---
# bad: [99d99825fc075fd24b60cc9cf0fb1e20b9c16b0f] Merge tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
# good: [1c59d383390f970b891b503b7f79b63a02db2ec5] Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
git bisect start '99d99825fc07' '1c59d383390f'
# bad: [53ea7f624fb91074c2f9458832ed74975ee5d64c] Merge tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
git bisect bad 53ea7f624fb91074c2f9458832ed74975ee5d64c
# good: [aa05346dad4b37d068cf9144f0a1236757816886] Merge branch 'iep-drver-timestamping-support'
git bisect good aa05346dad4b37d068cf9144f0a1236757816886
# good: [651a00bc56403161351090a9d7ddbd7095975324] Merge tag 'slab-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
git bisect good 651a00bc56403161351090a9d7ddbd7095975324
# good: [b96a3e9142fdf346b05b20e867b4f0dfca119e96] Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
git bisect good b96a3e9142fdf346b05b20e867b4f0dfca119e96
# bad: [3d3dfeb3aec7b612d266d500c82054f1fded4980] Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux
git bisect bad 3d3dfeb3aec7b612d266d500c82054f1fded4980
# bad: [c1b7fcf3f6d94c2c3528bf77054bf174a5ef63d7] Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
git bisect bad c1b7fcf3f6d94c2c3528bf77054bf174a5ef63d7
# bad: [dce8f8ed1de1d9d6d27c5ccd202ce4ec163b100c] document while_each_thread(), change first_tid() to use for_each_thread()
git bisect bad dce8f8ed1de1d9d6d27c5ccd202ce4ec163b100c
# good: [02d7f74a04b1299ab2a0a9095f0e2d5aa3aed553] lib/bch.c: use bitrev instead of internal logic
git bisect good 02d7f74a04b1299ab2a0a9095f0e2d5aa3aed553
# good: [79939c4a79bc643d399bd3fdd0f87100ea6b4362] scripts/gdb/slab: add slab support
git bisect good 79939c4a79bc643d399bd3fdd0f87100ea6b4362
# bad: [5ffd2c37cb7a53d52099e5ed1fd7ccbc9e358791] kill do_each_thread()
git bisect bad 5ffd2c37cb7a53d52099e5ed1fd7ccbc9e358791
# good: [665536092355f17f0e2ea291eec70f9787dccd32] lib/vsprintf: declare no_hash_pointers in sprintf.h
git bisect good 665536092355f17f0e2ea291eec70f9787dccd32
# bad: [ef815d2cba782e96b9aad9483523d474ed41c62a] treewide: drop CONFIG_EMBEDDED
git bisect bad ef815d2cba782e96b9aad9483523d474ed41c62a
# bad: [0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195] lockdep: fix static memory detection even more
git bisect bad 0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195
# first bad commit: [0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195] lockdep: fix static memory detection even more
Helge Deller
maintainer* Guenter Roeck <[email protected]>:
Quoted 65 lines
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from
LINUX_EFI_INITRD_MEDIA_GUIDdevice path EFI stub: Exiting boot services[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #1 [ 0.000000] Stack : 0000000000000000 0000000000000000 9000000000223d6c 9000000001df0000 [ 0.000000] 9000000001df39a0 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 9000000001df39a8 0000000000000001 0000000000000000 900000000154b910 [ 0.000000] fffffffffffffffe 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 0000000000000001 0000000000000003 0000000000000010 0000000000000030 [ 0.000000] 0000000000000063 0000000000000001 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 9000000001c60650 9000000001e12000 [ 0.000000] 0000000000000000 9000000001560bc0 0000000000000000 9000000002ee6000 [ 0.000000] 0000000000000000 0000000000000000 9000000000223d84 0000000000000000 [ 0.000000] 00000000000000b0 0000000000000004 0000000000000000 0000000000000800 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4
Quoted 4 lines
Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Does this happens with CONFIG_SMP=n ?
If so, I think the untested patch below might fix the issue.
Helge
---
[PATCH] loogarch: Keep PERCPU section in init section even for !CONFIG_SMP
arch/loongarch/kernel/vmlinux.lds.S +0 -2
@@ -99,9 +99,7 @@ SECTIONS EXIT_DATA } -#ifdef CONFIG_SMP PERCPU_SECTION(1 << CONFIG_L1_CACHE_SHIFT) -#endif .init.bss : { *(.init.bss)
Quoted 66 lines · Helge Deller
* Guenter Roeck <[email protected]>:
Quoted 65 lines
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from
LINUX_EFI_INITRD_MEDIA_GUIDdevice path EFI stub: Exiting boot services[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #1 [ 0.000000] Stack : 0000000000000000 0000000000000000 9000000000223d6c 9000000001df0000 [ 0.000000] 9000000001df39a0 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 9000000001df39a8 0000000000000001 0000000000000000 900000000154b910 [ 0.000000] fffffffffffffffe 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 0000000000000001 0000000000000003 0000000000000010 0000000000000030 [ 0.000000] 0000000000000063 0000000000000001 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 9000000001c60650 9000000001e12000 [ 0.000000] 0000000000000000 9000000001560bc0 0000000000000000 9000000002ee6000 [ 0.000000] 0000000000000000 0000000000000000 9000000000223d84 0000000000000000 [ 0.000000] 00000000000000b0 0000000000000004 0000000000000000 0000000000000800 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4
Quoted 8 lines
Quoted 4 lines
Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Does this happens with
CONFIG_SMP=n?
If so, I think the untested patch below might fix the issue.
No, this is loongarch:defconfig with various debug options enabled. That has CONFIG_SMP=y.
Guenter
Quoted 22 lines
Helge
---
[PATCH] loogarch: Keep PERCPU section in init section even for !CONFIG_SMP
Signed-off-by Helge Deller <[email protected]>arch/loongarch/kernel/vmlinux.lds.S +0
-2@@ -99,9 +99,7 @@ SECTIONS EXIT_DATA } -#ifdef CONFIG_SMP PERCPU_SECTION(1 << CONFIG_L1_CACHE_SHIFT) -#endif .init.bss : { *(.init.bss)
Helge Deller
maintainer* Guenter Roeck <[email protected]>:
Quoted 72 lines · Helge Deller
Quoted 71 lines
* Guenter Roeck <[email protected]>:
Quoted 69 lines
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from
LINUX_EFI_INITRD_MEDIA_GUIDdevice path EFI stub: Exiting boot services[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #1 [ 0.000000] Stack : 0000000000000000 0000000000000000 9000000000223d6c 9000000001df0000 [ 0.000000] 9000000001df39a0 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 9000000001df39a8 0000000000000001 0000000000000000 900000000154b910 [ 0.000000] fffffffffffffffe 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 0000000000000001 0000000000000003 0000000000000010 0000000000000030 [ 0.000000] 0000000000000063 0000000000000001 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 9000000001c60650 9000000001e12000 [ 0.000000] 0000000000000000 9000000001560bc0 0000000000000000 9000000002ee6000 [ 0.000000] 0000000000000000 0000000000000000 9000000000223d84 0000000000000000 [ 0.000000] 00000000000000b0 0000000000000004 0000000000000000 0000000000000800 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Quoted 6 lines
Quoted 3 lines
Does this happens with
CONFIG_SMP=n?
If so, I think the untested patch below might fix the issue.No, this is loongarch:defconfig with various debug options enabled. That has
CONFIG_SMP=y.
Could you apply below patch and verify with the contents of the System.map file where the lock is located ?
kernel/locking/lockdep.c +1 -1
@@ -969,7 +969,7 @@ static bool assign_lock_key(struct lockdep_map *lock)else {/* Debug-check: all keys must be persistent! */ debug_locks_off (); -pr_err ("INFO: trying to register non-static key.\n" ); +pr_err ("INFO: trying to register non-static key at %08lx.\n" , addr);pr_err ("The code is fine but needs lockdep annotation, or maybe\n" );pr_err ("you didn't initialize this object before use?\n" );pr_err ("turning off the locking correctness validator.\n" );
Quoted 88 lines · Helge Deller
* Guenter Roeck <[email protected]>:
Quoted 72 lines · Helge Deller
Quoted 71 lines
* Guenter Roeck <[email protected]>:
Quoted 69 lines
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from
LINUX_EFI_INITRD_MEDIA_GUIDdevice path EFI stub: Exiting boot services[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #1 [ 0.000000] Stack : 0000000000000000 0000000000000000 9000000000223d6c 9000000001df0000 [ 0.000000] 9000000001df39a0 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 9000000001df39a8 0000000000000001 0000000000000000 900000000154b910 [ 0.000000] fffffffffffffffe 9000000001df39a8 0000000000000000 0000000000000000 [ 0.000000] 0000000000000001 0000000000000003 0000000000000010 0000000000000030 [ 0.000000] 0000000000000063 0000000000000001 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 9000000001c60650 9000000001e12000 [ 0.000000] 0000000000000000 9000000001560bc0 0000000000000000 9000000002ee6000 [ 0.000000] 0000000000000000 0000000000000000 9000000000223d84 0000000000000000 [ 0.000000] 00000000000000b0 0000000000000004 0000000000000000 0000000000000800 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Quoted 6 lines
Quoted 3 lines
Does this happens with
CONFIG_SMP=n?
If so, I think the untested patch below might fix the issue.No, this is loongarch:defconfig with various debug options enabled. That has
CONFIG_SMP=y.Could you apply below patch and verify with the contents of the System.map file where the lock is located ?
kernel/locking/lockdep.c +0
-0
kernel/locking/lockdep.c static bool assign_lock_key(struct lockdep_map *lock) · line 975
Quoted 8 lines
kernel/locking/lockdep.c +1
-1@@ -969,7 +969,7 @@ static bool assign_lock_key(struct lockdep_map *lock)else {/* Debug-check: all keys must be persistent! */ debug_locks_off (); -pr_err ("INFO: trying to register non-static key.\n" ); +pr_err ("INFO: trying to register non-static key at %08lx.\n" , addr);pr_err ("The code is fine but needs lockdep annotation, or maybe\n" );pr_err ("you didn't initialize this object before use?\n" );pr_err ("turning off the locking correctness validator.\n" );
90000000015602d0 D __la_abs_end
...90000000016815c0 d fill_pool_map.3 <--- lock pointer
...
9000000001770000 T __init_begin
Guenter
Helge Deller
maintainer* Guenter Roeck <[email protected]>:
Quoted 84 lines · Helge Deller
Quoted 83 lines
* Guenter Roeck <[email protected]>:
Quoted 61 lines · Helge Deller
Quoted 60 lines
* Guenter Roeck <[email protected]>:
Quoted 58 lines
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from
LINUX_EFI_INITRD_MEDIA_GUIDdevice path EFI stub: Exiting boot services[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Quoted 6 lines
Quoted 3 lines
Does this happens with
CONFIG_SMP=n?
If so, I think the untested patch below might fix the issue.No, this is loongarch:defconfig with various debug options enabled. That has
CONFIG_SMP=y.Could you apply below patch and verify with the contents of the System.map file where the lock is located ?
kernel/locking/lockdep.c +1
-1@@ -969,7 +969,7 @@ static bool assign_lock_key(struct lockdep_map *lock)else {/* Debug-check: all keys must be persistent! */ debug_locks_off (); -pr_err ("INFO: trying to register non-static key.\n" ); +pr_err ("INFO: trying to register non-static key at %08lx.\n" , addr);pr_err ("The code is fine but needs lockdep annotation, or maybe\n" );
Quoted 8 lines
kernel/locking/lockdep.c static bool assign_lock_key(struct lockdep_map *lock) · line 975
Quoted 2 lines
kernel/locking/lockdep.c +0
-0pr_err ("you didn't initialize this object before use?\n" );pr_err ("turning off the locking correctness validator.\n" );
90000000015602d0D__la_abs_end
...90000000016815c0d fill_pool_map.3 <--- lock pointer
...
9000000001770000 T__init_begin
The problem is, that loongarch's vmlinux.lds.S file puts data into areas which are not marked "data" or "code".
can you try below patch?
The relevant part is here the move of ".data.rel : { *(.data.rel*) }" into the data section.
The other parts are suggestions.
Helge
arch/loongarch/kernel/vmlinux.lds.S +28 -27
@@ -53,33 +53,6 @@ SECTIONS . = ALIGN(PECOFF_SEGMENT_ALIGN); _etext = .; - /* - * struct alt_inst entries. From the header (alternative.h): - * "Alternative instructions for different CPU types or capabilities" - * Think locking instructions on spinlocks. - */ - . = ALIGN(4); - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - __alt_instructions = .; - *(.altinstructions) - __alt_instructions_end = .; - } - -#ifdef CONFIG_RELOCATABLE - . = ALIGN(8); - .la_abs : AT(ADDR(.la_abs) - LOAD_OFFSET) { - __la_abs_begin = .; - *(.la_abs) - __la_abs_end = .; - } -#endif - - .got : ALIGN(16) { *(.got) } - .plt : ALIGN(16) { *(.plt) } - .got.plt : ALIGN(16) { *(.got.plt) } - - .data.rel : { *(.data.rel*) } - . = ALIGN(PECOFF_SEGMENT_ALIGN); __init_begin = .; __inittext_begin = .;
@@ -94,6 +67,18 @@ SECTIONS __initdata_begin = .; + /* + * struct alt_inst entries. From the header (alternative.h): + * "Alternative instructions for different CPU types or capabilities" + * Think locking instructions on spinlocks. + */ + . = ALIGN(4); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + INIT_DATA_SECTION(16) .exit.data : { EXIT_DATA
@@ -113,6 +98,11 @@ SECTIONS _sdata = .; RO_DATA(4096) + + .got : ALIGN(16) { *(.got) } + .plt : ALIGN(16) { *(.plt) } + .got.plt : ALIGN(16) { *(.got.plt) } + RW_DATA(1 << CONFIG_L1_CACHE_SHIFT, PAGE_SIZE, THREAD_SIZE) .rela.dyn : ALIGN(8) {
@@ -121,6 +111,17 @@ SECTIONS __rela_dyn_end = .; } + .data.rel : { *(.data.rel*) } + +#ifdef CONFIG_RELOCATABLE + . = ALIGN(8); + .la_abs : AT(ADDR(.la_abs) - LOAD_OFFSET) { + __la_abs_begin = .; + *(.la_abs) + __la_abs_end = .; + } +#endif + .sdata : { *(.sdata) }
Quoted 94 lines · Helge Deller
* Guenter Roeck <[email protected]>:
Quoted 84 lines · Helge Deller
Quoted 83 lines
* Guenter Roeck <[email protected]>:
Quoted 61 lines · Helge Deller
Quoted 60 lines
* Guenter Roeck <[email protected]>:
Quoted 58 lines
Hi,
Quoted 21 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the
__initdatasection, but the section itself is on parisc outside of range from_stextto_end, which is why thestatic_obj()functions returns a wrong answer.While fixing this issue, I noticed that the whole existing check can be simplified a lot.
Instead of checking against the_stextand_endsymbols (which include code areas too) just check for the .data and .bss segments (since we check a data object). This can be done with the existingis_kernel_core_data()macro.In addition objects in the
__initdatasection can be checked withinit_section_contains().Quoted 7 lines
This partly reverts and simplifies commit
bac59d18c701("x86/setup: Fix static memory detection").Tested on x86-64 and parisc.
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace.
EFI stub: Loaded initrd from
LINUX_EFI_INITRD_MEDIA_GUIDdevice path EFI stub: Exiting boot services[ 0.000000] INFO: trying to register non-static key. [ 0.000000] The code is fine but needs lockdep annotation, or maybe [ 0.000000] you didn't initialize this object before use? [ 0.000000] turning off the locking correctness validator. [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<9000000000223d84>] show_stack+0x5c/0x180 [ 0.000000] [<900000000153e0b4>] dump_stack_lvl+0x88/0xd0 [ 0.000000] [<90000000002bc548>] register_lock_class+0x768/0x770 [ 0.000000] [<90000000002bc710>] __lock_acquire+0xb0/0x2a18 [ 0.000000] [<90000000002bba1c>] lock_acquire+0x11c/0x328 [ 0.000000] [<9000000000b34a60>] __debug_object_init+0x60/0x244 [ 0.000000] [<9000000000337f94>] init_cgroup_housekeeping+0xe8/0x144 [ 0.000000] [<900000000033e364>] init_cgroup_root+0x38/0xa0 [ 0.000000] [<90000000017801ac>] cgroup_init_early+0x44/0x16c [ 0.000000] [<9000000001770758>] start_kernel+0x50/0x624 [ 0.000000] [<90000000015410b4>] kernel_entry+0xb4/0xc4Reverting it fixes the problem. Bisect log attached.
This is also seen in v6.5.y and v6.4.y since the patch has been applied to those branches.
Quoted 6 lines
Quoted 3 lines
Does this happens with
CONFIG_SMP=n?
If so, I think the untested patch below might fix the issue.No, this is loongarch:defconfig with various debug options enabled. That has
CONFIG_SMP=y.Could you apply below patch and verify with the contents of the System.map file where the lock is located ?
kernel/locking/lockdep.c +1
-1@@ -969,7 +969,7 @@ static bool assign_lock_key(struct lockdep_map *lock)else {/* Debug-check: all keys must be persistent! */ debug_locks_off (); -pr_err ("INFO: trying to register non-static key.\n" ); +pr_err ("INFO: trying to register non-static key at %08lx.\n" , addr);pr_err ("The code is fine but needs lockdep annotation, or maybe\n" );Quoted 8 lines
kernel/locking/lockdep.c static bool assign_lock_key(struct lockdep_map *lock) · line 975
Quoted 2 lines
kernel/locking/lockdep.c +0
-0pr_err ("you didn't initialize this object before use?\n" );pr_err ("turning off the locking correctness validator.\n" );
90000000015602d0D__la_abs_end
...90000000016815c0d fill_pool_map.3 <--- lock pointer
...
9000000001770000 T__init_begin
Quoted 8 lines
The problem is, that loongarch's
vmlinux.lds.Sfile puts data into areas which are not marked "data" or "code".can you try below patch?
The relevant part is here the move of ".data.rel : { *(.data.rel*) }" into the data section.
The other parts are suggestions.
The patch below fixes the problem for me.
Guenter
Quoted 91 lines
Helge
arch/loongarch/kernel/vmlinux.lds.S +28
-27@@ -53,33 +53,6 @@ SECTIONS . = ALIGN(PECOFF_SEGMENT_ALIGN); _etext = .; - /* - * struct alt_inst entries. From the header (alternative.h): - * "Alternative instructions for different CPU types or capabilities" - * Think locking instructions on spinlocks. - */ - . = ALIGN(4); - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - __alt_instructions = .; - *(.altinstructions) - __alt_instructions_end = .; - } - -#ifdef CONFIG_RELOCATABLE - . = ALIGN(8); - .la_abs : AT(ADDR(.la_abs) - LOAD_OFFSET) { - __la_abs_begin = .; - *(.la_abs) - __la_abs_end = .; - } -#endif - - .got : ALIGN(16) { *(.got) } - .plt : ALIGN(16) { *(.plt) } - .got.plt : ALIGN(16) { *(.got.plt) } - - .data.rel : { *(.data.rel*) } - . = ALIGN(PECOFF_SEGMENT_ALIGN); __init_begin = .; __inittext_begin = .;@@ -94,6 +67,18 @@ SECTIONS __initdata_begin = .; + /* + * struct alt_inst entries. From the header (alternative.h): + * "Alternative instructions for different CPU types or capabilities" + * Think locking instructions on spinlocks. + */ + . = ALIGN(4); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + INIT_DATA_SECTION(16) .exit.data : { EXIT_DATA@@ -113,6 +98,11 @@ SECTIONS _sdata = .; RO_DATA(4096) + + .got : ALIGN(16) { *(.got) } + .plt : ALIGN(16) { *(.plt) } + .got.plt : ALIGN(16) { *(.got.plt) } + RW_DATA(1 << CONFIG_L1_CACHE_SHIFT, PAGE_SIZE, THREAD_SIZE) .rela.dyn : ALIGN(8) {@@ -121,6 +111,17 @@ SECTIONS __rela_dyn_end = .; } + .data.rel : { *(.data.rel*) } + +#ifdef CONFIG_RELOCATABLE + . = ALIGN(8); + .la_abs : AT(ADDR(.la_abs) - LOAD_OFFSET) { + __la_abs_begin = .; + *(.la_abs) + __la_abs_end = .; + } +#endif + .sdata : { *(.sdata) }
[side notes:
* mail has a reduced set of recipients
* fix is in the works, but add it to the tracking, as rc1 is due
* just in case it was missed: culprit made it to various stable series]
[TLDR: I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form. See link in footer if these mails annoy you.]
Quoted 6 lines · Guenter Roeck
Quoted 4 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:
Quoted 8 lines
Quoted 2 lines
INFO: trying to register non-static key.
[...]
Quoted 2 lines
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace. [...]> # first bad commit: [
0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195]
lockdep: fix static memory detection even more
Thanks for the report. To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot:
#regzbot ^introduced 0a6b58c5cd0dfd7961e725212f0fc8dfc5d961 #regzbot title lockdep: backtrace on loongarch #regzbot ignore-activity
This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail.
Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (the parent of this mail). See page linked in footer for details.
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) --
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.
[TLDR: This mail in primarily relevant for Linux regression tracking. A change or fix related to the regression discussed in this thread was posted or applied, but it did not use a Closes: tag to point to the report, as Linus and the documentation call for. Things happen, no worries -- but now the regression tracking bot needs to be told manually about the fix. See link in footer if these mails annoy you.]
Quoted 17 lines · Linux regression tracking #adding (Thorsten Leemhuis)
Quoted 6 lines · Guenter Roeck
Quoted 4 lines · Helge Deller
On the parisc architecture, lockdep reports for all static objects which are in the
__initdatasection (e.g. "setup_done" in devtmpfs, "kthreadd_done" ininit/main.c) this warning:Quoted 8 lines
Quoted 2 lines
INFO: trying to register non-static key.
[...]
Quoted 2 lines
Signed-off-by Helge Deller <[email protected]>Fixes bac59d18c701 ("x86/setup: Fix static memory detection")On loongarch, this patch results in the following backtrace. [...]> # first bad commit: [
0a6b58c5cd0dfd7961e725212f0fc8dfc5d96195]lockdep: fix static memory detection even more
Quoted 7 lines
Thanks for the report. To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot:
#regzbot ^introduced
0a6b58c5cd0dfd7961e725212f0fc8dfc5d961#regzbot title lockdep: backtrace on loongarch #regzbot ignore-activity
Fix fow in next (as 68ffa230daa0d35b7cce476098433d763d5fd42f)
#regzbot fix: LoongArch: Fix lockdep static memory detection #regzbot ignore-activity
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) --
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.