staging: vme_user: fix coding style - remove CamelCasing
PATCH 1/1 staging: vme_user: fix coding style - remove CamelCasing
This patch addresses coding style errors identified by checkpatch. The changes include converting camel case names in constant variables to UPPERCASE. These changes align with the coding style guidelines.
--- drivers/staging/vme_user/vme.h | 12 ++-- drivers/staging/vme_user/vme_fake.c | 8 +-- drivers/staging/vme_user/vme_tsi148.c | 88 +++++++++++++-------------- 3 files changed, 54 insertions(+), 54 deletions(-)
drivers/staging/vme_user/vme.h +6 -6
@@ -33,13 +33,13 @@ enum vme_resource_type {#define VME_SCT 0x1#define VME_BLT 0x2#define VME_MBLT 0x4 -#define VME_2eVME 0x8 -#define VME_2eSST 0x10 -#define VME_2eSSTB 0x20 +#define VME_2EVME 0x8 +#define VME_2ESST 0x10 +#define VME_2ESSTB 0x20 -#define VME_2eSST160 0x100 -#define VME_2eSST267 0x200 -#define VME_2eSST320 0x400 +#define VME_2ESST160 0x100 +#define VME_2ESST267 0x200 +#define VME_2ESST320 0x400#define VME_SUPER 0x1000#define VME_USER 0x2000
drivers/staging/vme_user/vme_fake.c +4 -4
@@ -1108,8 +1108,8 @@ static int __init fake_init(void) master_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ; master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,
@@ -1135,8 +1135,8 @@ static int __init fake_init(void)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &fake_bridge->slave_resources);
drivers/staging/vme_user/vme_tsi148.c +44 -44
212 lines not on this page · raw message
Signature · 1 line
2.34.1
Quoted 3 lines · Calvince Otieno
This patch addresses coding style errors identified by checkpatch. The changes include converting camel case names in constant variables to UPPERCASE. These changes align with the coding style guidelines.
Did someone suggest this? It looks like the lowercase e might be related to something in the device documentation?
julia
Quoted 292 lines
Signed-off-by Calvince Otieno <[email protected]>--- drivers/staging/vme_user/vme.h | 12 ++-- drivers/staging/vme_user/vme_fake.c | 8 +-- drivers/staging/vme_user/vme_tsi148.c | 88 +++++++++++++-------------- 3 files changed, 54 insertions(+), 54 deletions(-)drivers/staging/vme_user/vme.h +6
-6@@ -33,13 +33,13 @@ enum vme_resource_type {#define VME_SCT 0x1#define VME_BLT 0x2#define VME_MBLT 0x4 -#define VME_2eVME 0x8 -#define VME_2eSST 0x10 -#define VME_2eSSTB 0x20 +#define VME_2EVME 0x8 +#define VME_2ESST 0x10 +#define VME_2ESSTB 0x20 -#define VME_2eSST160 0x100 -#define VME_2eSST267 0x200 -#define VME_2eSST320 0x400 +#define VME_2ESST160 0x100 +#define VME_2ESST267 0x200 +#define VME_2ESST320 0x400#define VME_SUPER 0x1000#define VME_USER 0x2000drivers/staging/vme_user/vme_fake.c +4
-4@@ -1108,8 +1108,8 @@ static int __init fake_init(void) master_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ; master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,@@ -1135,8 +1135,8 @@ static int __init fake_init(void)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &fake_bridge->slave_resources);drivers/staging/vme_user/vme_tsi148.c +44
-45@@ -551,14 +551,14 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,/* Setup 2eSST speeds */ temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320;break ; }@@ -569,11 +569,11 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, temp_ctl |=TSI148_LCSR_ITAT_BLT ;if (cycle &VME_MBLT ) temp_ctl |=TSI148_LCSR_ITAT_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) temp_ctl |= TSI148_LCSR_ITAT_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) temp_ctl |= TSI148_LCSR_ITAT_2eSST; -if (cycle & VME_2eSSTB) +if (cycle &VME_2ESSTB ) temp_ctl |= TSI148_LCSR_ITAT_2eSSTB;/* Setup address space */ @@ -673,22 +673,22 @@ static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, *size = (unsigned long long )((vme_bound - *vme_base) + granularity);if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) - *cycle |= VME_2eSST160; + *cycle |=VME_2ESST160 ;if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) - *cycle |= VME_2eSST267; + *cycle |=VME_2ESST267 ;if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) - *cycle |= VME_2eSST320; + *cycle |=VME_2ESST320 ;if (ctl &TSI148_LCSR_ITAT_BLT ) *cycle |=VME_BLT ;if (ctl &TSI148_LCSR_ITAT_MBLT ) *cycle |=VME_MBLT ;if (ctl & TSI148_LCSR_ITAT_2eVME) - *cycle |= VME_2eVME; + *cycle |=VME_2EVME ;if (ctl & TSI148_LCSR_ITAT_2eSST) - *cycle |= VME_2eSST; + *cycle |=VME_2ESST ;if (ctl & TSI148_LCSR_ITAT_2eSSTB) - *cycle |= VME_2eSSTB; + *cycle |=VME_2ESSTB ;if (ctl &TSI148_LCSR_ITAT_SUPR ) *cycle |=VME_SUPER ;@@ -895,14 +895,14 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,/* Setup 2eSST speeds */ temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320;break ; }@@ -916,15 +916,15 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled, temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |=TSI148_LCSR_OTAT_TM_MBLT ; } -if (cycle & VME_2eVME) { +if (cycle &VME_2EVME ) { temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; } -if (cycle & VME_2eSST) { +if (cycle &VME_2ESST ) { temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; } -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_warn (tsi148_bridge->parent,"Currently not setting Broadcast Select Registers\n" ); temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB;@@ -1100,11 +1100,11 @@ static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,/* Setup 2eSST speeds */ if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) - *cycle |= VME_2eSST160; + *cycle |=VME_2ESST160 ;if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) - *cycle |= VME_2eSST267; + *cycle |=VME_2ESST267 ;if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) - *cycle |= VME_2eSST320; + *cycle |=VME_2ESST320 ;/* Setup cycle types */ if ((ctl &TSI148_LCSR_OTAT_TM_M ) ==TSI148_LCSR_OTAT_TM_SCT )@@ -1114,11 +1114,11 @@ static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,if ((ctl &TSI148_LCSR_OTAT_TM_M ) ==TSI148_LCSR_OTAT_TM_MBLT ) *cycle |=VME_MBLT ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eVME) - *cycle |= VME_2eVME; + *cycle |=VME_2EVME ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSST) - *cycle |= VME_2eSST; + *cycle |=VME_2ESST ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSSTB) - *cycle |= VME_2eSSTB; + *cycle |=VME_2ESSTB ;if (ctl &TSI148_LCSR_OTAT_SUP ) *cycle |=VME_SUPER ;@@ -1406,14 +1406,14 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, val =be32_to_cpu (*attr);/* Setup 2eSST speeds */ -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : val |= TSI148_LCSR_DSAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : val |= TSI148_LCSR_DSAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : val |= TSI148_LCSR_DSAT_2eSSTM_320;break ; }@@ -1428,13 +1428,13 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,if (cycle &VME_MBLT ) val |=TSI148_LCSR_DSAT_TM_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) val |= TSI148_LCSR_DSAT_TM_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) val |= TSI148_LCSR_DSAT_TM_2eSST; -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_err (dev,"Currently not setting Broadcast Select Registers\n" ); val |= TSI148_LCSR_DSAT_TM_2eSSTB; }@@ -1504,14 +1504,14 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, val =be32_to_cpu (*attr);/* Setup 2eSST speeds */ -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : val |= TSI148_LCSR_DDAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : val |= TSI148_LCSR_DDAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : val |= TSI148_LCSR_DDAT_2eSSTM_320;break ; }@@ -1526,13 +1526,13 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,if (cycle &VME_MBLT ) val |=TSI148_LCSR_DDAT_TM_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) val |= TSI148_LCSR_DDAT_TM_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) val |= TSI148_LCSR_DDAT_TM_2eSST; -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_err (dev,"Currently not setting Broadcast Select Registers\n" ); val |= TSI148_LCSR_DDAT_TM_2eSSTB; }@@ -2359,8 +2359,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ; master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,@@ -2384,8 +2384,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) slave_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &tsi148_bridge->slave_resources); --2.34.1
Quoted 298 lines · Julia Lawall
Quoted 3 lines · Calvince Otieno
This patch addresses coding style errors identified by checkpatch. The changes include converting camel case names in constant variables to UPPERCASE. These changes align with the coding style guidelines.
Did someone suggest this? It looks like the lowercase e might be related to something in the device documentation?
julia
Quoted 284 lines
Signed-off-by Calvince Otieno <[email protected]>--- drivers/staging/vme_user/vme.h | 12 ++-- drivers/staging/vme_user/vme_fake.c | 8 +-- drivers/staging/vme_user/vme_tsi148.c | 88 +++++++++++++-------------- 3 files changed, 54 insertions(+), 54 deletions(-)drivers/staging/vme_user/vme.h +6
-6@@ -33,13 +33,13 @@ enum vme_resource_type {#define VME_SCT 0x1#define VME_BLT 0x2#define VME_MBLT 0x4 -#define VME_2eVME 0x8 -#define VME_2eSST 0x10 -#define VME_2eSSTB 0x20 +#define VME_2EVME 0x8 +#define VME_2ESST 0x10 +#define VME_2ESSTB 0x20 -#define VME_2eSST160 0x100 -#define VME_2eSST267 0x200 -#define VME_2eSST320 0x400 +#define VME_2ESST160 0x100 +#define VME_2ESST267 0x200 +#define VME_2ESST320 0x400#define VME_SUPER 0x1000#define VME_USER 0x2000drivers/staging/vme_user/vme_fake.c +4
-4@@ -1108,8 +1108,8 @@ static int __init fake_init(void) master_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ; master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,@@ -1135,8 +1135,8 @@ static int __init fake_init(void)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &fake_bridge->slave_resources);drivers/staging/vme_user/vme_tsi148.c +43
-44@@ -551,14 +551,14 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,/* Setup 2eSST speeds */ temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320;break ; }@@ -569,11 +569,11 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, temp_ctl |=TSI148_LCSR_ITAT_BLT ;if (cycle &VME_MBLT ) temp_ctl |=TSI148_LCSR_ITAT_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) temp_ctl |= TSI148_LCSR_ITAT_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) temp_ctl |= TSI148_LCSR_ITAT_2eSST; -if (cycle & VME_2eSSTB) +if (cycle &VME_2ESSTB ) temp_ctl |= TSI148_LCSR_ITAT_2eSSTB;/* Setup address space */ @@ -673,22 +673,22 @@ static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, *size = (unsigned long long )((vme_bound - *vme_base) + granularity);if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) - *cycle |= VME_2eSST160; + *cycle |=VME_2ESST160 ;if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) - *cycle |= VME_2eSST267; + *cycle |=VME_2ESST267 ;if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) - *cycle |= VME_2eSST320; + *cycle |=VME_2ESST320 ;if (ctl &TSI148_LCSR_ITAT_BLT ) *cycle |=VME_BLT ;if (ctl &TSI148_LCSR_ITAT_MBLT ) *cycle |=VME_MBLT ;if (ctl & TSI148_LCSR_ITAT_2eVME) - *cycle |= VME_2eVME; + *cycle |=VME_2EVME ;if (ctl & TSI148_LCSR_ITAT_2eSST) - *cycle |= VME_2eSST; + *cycle |=VME_2ESST ;if (ctl & TSI148_LCSR_ITAT_2eSSTB) - *cycle |= VME_2eSSTB; + *cycle |=VME_2ESSTB ;if (ctl &TSI148_LCSR_ITAT_SUPR ) *cycle |=VME_SUPER ;@@ -895,14 +895,14 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,/* Setup 2eSST speeds */ temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320;break ; }@@ -916,15 +916,15 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled, temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |=TSI148_LCSR_OTAT_TM_MBLT ; } -if (cycle & VME_2eVME) { +if (cycle &VME_2EVME ) { temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; } -if (cycle & VME_2eSST) { +if (cycle &VME_2ESST ) { temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; } -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_warn (tsi148_bridge->parent,"Currently not setting Broadcast Select Registers\n" ); temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB;@@ -1100,11 +1100,11 @@ static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,/* Setup 2eSST speeds */ if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) - *cycle |= VME_2eSST160; + *cycle |=VME_2ESST160 ;if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) - *cycle |= VME_2eSST267; + *cycle |=VME_2ESST267 ;if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) - *cycle |= VME_2eSST320; + *cycle |=VME_2ESST320 ;/* Setup cycle types */ if ((ctl &TSI148_LCSR_OTAT_TM_M ) ==TSI148_LCSR_OTAT_TM_SCT )@@ -1114,11 +1114,11 @@ static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,if ((ctl &TSI148_LCSR_OTAT_TM_M ) ==TSI148_LCSR_OTAT_TM_MBLT ) *cycle |=VME_MBLT ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eVME) - *cycle |= VME_2eVME; + *cycle |=VME_2EVME ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSST) - *cycle |= VME_2eSST; + *cycle |=VME_2ESST ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSSTB) - *cycle |= VME_2eSSTB; + *cycle |=VME_2ESSTB ;if (ctl &TSI148_LCSR_OTAT_SUP ) *cycle |=VME_SUPER ;@@ -1406,14 +1406,14 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, val =be32_to_cpu (*attr);/* Setup 2eSST speeds */ -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : val |= TSI148_LCSR_DSAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : val |= TSI148_LCSR_DSAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : val |= TSI148_LCSR_DSAT_2eSSTM_320;break ; }@@ -1428,13 +1428,13 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,if (cycle &VME_MBLT ) val |=TSI148_LCSR_DSAT_TM_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) val |= TSI148_LCSR_DSAT_TM_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) val |= TSI148_LCSR_DSAT_TM_2eSST; -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_err (dev,"Currently not setting Broadcast Select Registers\n" ); val |= TSI148_LCSR_DSAT_TM_2eSSTB; }@@ -1504,14 +1504,14 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, val =be32_to_cpu (*attr);/* Setup 2eSST speeds */ -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : val |= TSI148_LCSR_DDAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : val |= TSI148_LCSR_DDAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : val |= TSI148_LCSR_DDAT_2eSSTM_320;break ; }@@ -1526,13 +1526,13 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,if (cycle &VME_MBLT ) val |=TSI148_LCSR_DDAT_TM_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) val |= TSI148_LCSR_DDAT_TM_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) val |= TSI148_LCSR_DDAT_TM_2eSST; -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_err (dev,"Currently not setting Broadcast Select Registers\n" ); val |= TSI148_LCSR_DDAT_TM_2eSSTB; }@@ -2359,8 +2359,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ; master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,@@ -2384,8 +2384,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) slave_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_2EVME | VME_2ESST | VME_2ESSTB | VME_2ESST160 |
Quoted 8 lines
Quoted 8 lines
drivers/staging/vme_user/vme_tsi148.c +1
-1+VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &tsi148_bridge->slave_resources); --2.34.1
As description states, checkpatch recommendation
Signature · 2 lines
Kind regards, Calvince Otieno
Quoted 1 line
As description states, checkpatch recommendation
This comment should be just under my text, that you are responding to, not at the end of the patch.
CamelCase is not just the mixture of uppercase and lowercase letters. It means that the things with upper and lowercase letters are real words, LikeThis. In the case of this driver, the lowercase letter was not part of an English word, so one can be suspicious that it has some other meaning. Checkpatch doesn't know what are real English words, so it makes the suggestions whenever there is a mixture of uppercase and lowercase letters.
julia
Greg Kroah-Hartman
maintainerQuoted 17 lines · Calvince Otieno
This patch addresses coding style errors identified by checkpatch. The changes include converting camel case names in constant variables to UPPERCASE. These changes align with the coding style guidelines.
Signed-off-by Calvince Otieno <[email protected]>--- drivers/staging/vme_user/vme.h | 12 ++-- drivers/staging/vme_user/vme_fake.c | 8 +-- drivers/staging/vme_user/vme_tsi148.c | 88 +++++++++++++-------------- 3 files changed, 54 insertions(+), 54 deletions(-)drivers/staging/vme_user/vme.h +0
-0
drivers/staging/vme_user/vme.h enum vme_resource_type { · line 38
Quoted 9 lines
drivers/staging/vme_user/vme.h +3
-3@@ -33,13 +33,13 @@ enum vme_resource_type {#define VME_SCT 0x1#define VME_BLT 0x2#define VME_MBLT 0x4 -#define VME_2eVME 0x8 -#define VME_2eSST 0x10 -#define VME_2eSSTB 0x20 +#define VME_2EVME 0x8 +#define VME_2ESST 0x10 +#define VME_2ESSTB 0x20
Checkpatch is wrong here, this should stay as-is.
thanks,
greg k-h
Quoted 6 lines · Calvince Otieno
This patch addresses coding style errors identified by checkpatch. The changes include converting camel case names in constant variables to UPPERCASE. These changes align with the coding style guidelines.
Signed-off-by Calvince Otieno <[email protected]>
About the subject line -- I'd drop "fix coding style" and wrote about the specific change you did in the patch (macro rename? Variable rename?). "CamelCasing" should be simply "CamelCase", I think.
And a small nit -- just one blank line between the commit message and SoB will suffice.
Quoted 35 lines
--- drivers/staging/vme_user/vme.h | 12 ++-- drivers/staging/vme_user/vme_fake.c | 8 +-- drivers/staging/vme_user/vme_tsi148.c | 88 +++++++++++++-------------- 3 files changed, 54 insertions(+), 54 deletions(-)drivers/staging/vme_user/vme.h +6
-6@@ -33,13 +33,13 @@ enum vme_resource_type {#define VME_SCT 0x1#define VME_BLT 0x2#define VME_MBLT 0x4 -#define VME_2eVME 0x8 -#define VME_2eSST 0x10 -#define VME_2eSSTB 0x20 +#define VME_2EVME 0x8 +#define VME_2ESST 0x10 +#define VME_2ESSTB 0x20 -#define VME_2eSST160 0x100 -#define VME_2eSST267 0x200 -#define VME_2eSST320 0x400 +#define VME_2ESST160 0x100 +#define VME_2ESST267 0x200 +#define VME_2ESST320 0x400#define VME_SUPER 0x1000#define VME_USER 0x2000drivers/staging/vme_user/vme_fake.c +0
-0
drivers/staging/vme_user/vme_fake.c static int __init fake_init(void) · line 1113
Quoted 8 lines
drivers/staging/vme_user/vme_fake.c +2
-2@@ -1108,8 +1108,8 @@ static int __init fake_init(void) master_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;
I just did a quick search, and it seems like "2eSST320", "2eSST233" and "2eSST160" refer to bus names, so I'd keep them as they are in the code.
For the future, if you're not certain the meaning of a definition in a driver, you can always look it up. If you're lucky, you might find documentation for the hardware, or some article about it.
All the best,
Karolina
Quoted 242 lines
drivers/staging/vme_user/vme_fake.c +2
-2master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,@@ -1135,8 +1135,8 @@ static int __init fake_init(void)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &fake_bridge->slave_resources);drivers/staging/vme_user/vme_tsi148.c +44
-44@@ -551,14 +551,14 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,/* Setup 2eSST speeds */ temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320;break ; }@@ -569,11 +569,11 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, temp_ctl |=TSI148_LCSR_ITAT_BLT ;if (cycle &VME_MBLT ) temp_ctl |=TSI148_LCSR_ITAT_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) temp_ctl |= TSI148_LCSR_ITAT_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) temp_ctl |= TSI148_LCSR_ITAT_2eSST; -if (cycle & VME_2eSSTB) +if (cycle &VME_2ESSTB ) temp_ctl |= TSI148_LCSR_ITAT_2eSSTB;/* Setup address space */ @@ -673,22 +673,22 @@ static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, *size = (unsigned long long )((vme_bound - *vme_base) + granularity);if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) - *cycle |= VME_2eSST160; + *cycle |=VME_2ESST160 ;if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) - *cycle |= VME_2eSST267; + *cycle |=VME_2ESST267 ;if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) - *cycle |= VME_2eSST320; + *cycle |=VME_2ESST320 ;if (ctl &TSI148_LCSR_ITAT_BLT ) *cycle |=VME_BLT ;if (ctl &TSI148_LCSR_ITAT_MBLT ) *cycle |=VME_MBLT ;if (ctl & TSI148_LCSR_ITAT_2eVME) - *cycle |= VME_2eVME; + *cycle |=VME_2EVME ;if (ctl & TSI148_LCSR_ITAT_2eSST) - *cycle |= VME_2eSST; + *cycle |=VME_2ESST ;if (ctl & TSI148_LCSR_ITAT_2eSSTB) - *cycle |= VME_2eSSTB; + *cycle |=VME_2ESSTB ;if (ctl &TSI148_LCSR_ITAT_SUPR ) *cycle |=VME_SUPER ;@@ -895,14 +895,14 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,/* Setup 2eSST speeds */ temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320;break ; }@@ -916,15 +916,15 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled, temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |=TSI148_LCSR_OTAT_TM_MBLT ; } -if (cycle & VME_2eVME) { +if (cycle &VME_2EVME ) { temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; } -if (cycle & VME_2eSST) { +if (cycle &VME_2ESST ) { temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; } -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_warn (tsi148_bridge->parent,"Currently not setting Broadcast Select Registers\n" ); temp_ctl &= ~TSI148_LCSR_OTAT_TM_M ; temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB;@@ -1100,11 +1100,11 @@ static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,/* Setup 2eSST speeds */ if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) - *cycle |= VME_2eSST160; + *cycle |=VME_2ESST160 ;if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) - *cycle |= VME_2eSST267; + *cycle |=VME_2ESST267 ;if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) - *cycle |= VME_2eSST320; + *cycle |=VME_2ESST320 ;/* Setup cycle types */ if ((ctl &TSI148_LCSR_OTAT_TM_M ) ==TSI148_LCSR_OTAT_TM_SCT )@@ -1114,11 +1114,11 @@ static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,if ((ctl &TSI148_LCSR_OTAT_TM_M ) ==TSI148_LCSR_OTAT_TM_MBLT ) *cycle |=VME_MBLT ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eVME) - *cycle |= VME_2eVME; + *cycle |=VME_2EVME ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSST) - *cycle |= VME_2eSST; + *cycle |=VME_2ESST ;if ((ctl &TSI148_LCSR_OTAT_TM_M ) == TSI148_LCSR_OTAT_TM_2eSSTB) - *cycle |= VME_2eSSTB; + *cycle |=VME_2ESSTB ;if (ctl &TSI148_LCSR_OTAT_SUP ) *cycle |=VME_SUPER ;@@ -1406,14 +1406,14 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, val =be32_to_cpu (*attr);/* Setup 2eSST speeds */ -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : val |= TSI148_LCSR_DSAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : val |= TSI148_LCSR_DSAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : val |= TSI148_LCSR_DSAT_2eSSTM_320;break ; }@@ -1428,13 +1428,13 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,if (cycle &VME_MBLT ) val |=TSI148_LCSR_DSAT_TM_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) val |= TSI148_LCSR_DSAT_TM_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) val |= TSI148_LCSR_DSAT_TM_2eSST; -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_err (dev,"Currently not setting Broadcast Select Registers\n" ); val |= TSI148_LCSR_DSAT_TM_2eSSTB; }@@ -1504,14 +1504,14 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, val =be32_to_cpu (*attr);/* Setup 2eSST speeds */ -switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { -case VME_2eSST160: +switch (cycle & (VME_2ESST160 |VME_2ESST267 |VME_2ESST320 )) { +case VME_2ESST160 : val |= TSI148_LCSR_DDAT_2eSSTM_160;break ; -case VME_2eSST267: +case VME_2ESST267 : val |= TSI148_LCSR_DDAT_2eSSTM_267;break ; -case VME_2eSST320: +case VME_2ESST320 : val |= TSI148_LCSR_DDAT_2eSSTM_320;break ; }@@ -1526,13 +1526,13 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,if (cycle &VME_MBLT ) val |=TSI148_LCSR_DDAT_TM_MBLT ; -if (cycle & VME_2eVME) +if (cycle &VME_2EVME ) val |= TSI148_LCSR_DDAT_TM_2eVME; -if (cycle & VME_2eSST) +if (cycle &VME_2ESST ) val |= TSI148_LCSR_DDAT_TM_2eSST; -if (cycle & VME_2eSSTB) { +if (cycle &VME_2ESSTB ) {dev_err (dev,"Currently not setting Broadcast Select Registers\n" ); val |= TSI148_LCSR_DDAT_TM_2eSSTB; }@@ -2359,8 +2359,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)VME_A64 |VME_CRCSR |VME_USER1 |VME_USER2 |VME_USER3 |VME_USER4 ; master_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ; master_image->width_attr =VME_D16 |VME_D32 ; memset(&master_image->bus_resource, 0,@@ -2384,8 +2384,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) slave_image->address_attr =VME_A16 |VME_A24 |VME_A32 |VME_A64 ; slave_image->cycle_attr =VME_SCT |VME_BLT |VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 |VME_SUPER |VME_USER | +VME_2EVME |VME_2ESST |VME_2ESSTB |VME_2ESST160 | +VME_2ESST267 |VME_2ESST320 |VME_SUPER |VME_USER |VME_PROG |VME_DATA ;list_add_tail (&slave_image->list, &tsi148_bridge->slave_resources);