Front camera on pinephone
Hi!
In 6.8-rc0, driver for gc2145 (front camera on pinephone) was merged, but we don't have corresponding dts entries. Does anyone have setup where they can fix it easily?
[If you have hints how to set-up pinephone for kernel development, that would be welcome. Currently I have mobian with rather old 6.1 kernel on it, and lack of keyboard/ethernet makes things tricky.]
Best regards,
Pavel
Signature · 1 line
People of Russia, stop Putin before his war on Ukraine escalates.
Hello Pavel,
Isn't this simply the case of picking the gc2145 bits from Megis tree?
[For the pinephone kernel development there's the option of building the kernel using envkernel.sh in postmarketOS with https://wiki.postmarketos.org/wiki/Compiling_kernels_with_envkernel.sh which has some automation for building a kernel and pushing it to a connected device. Ethernet and keyboard are replaced by ssh and usb-networking in this case]
Greetings,
Martijn
Quoted 12 lines · Pavel Machek
Hi!
In 6.8-rc0, driver for gc2145 (front camera on pinephone) was merged, but we don't have corresponding dts entries. Does anyone have setup where they can fix it easily?
[If you have hints how to set-up pinephone for kernel development, that would be welcome. Currently I have mobian with rather old 6.1 kernel on it, and lack of keyboard/ethernet makes things tricky.]
Best regards,
Pavel
Hi!
Quoted 3 lines
Isn't this simply the case of picking the gc2145 bits from Megis tree?
Well, that, adjusting dts bits to the new driver, testing and submitting the patch. And it looks someone did the work and patches are floating around. GOod :-).
I'm fighting with kexec crashing as soon as I pass dtb. Do I need to modify the dtb somehow?
Best regards,
Pavel
Am 16.01.24 um 09:05 schrieb Pavel Machek:
Quoted 3 lines
[If you have hints how to set-up pinephone for kernel development, that would be welcome. Currently I have mobian with rather old 6.1 kernel on it, and lack of keyboard/ethernet makes things tricky.]
So far I'm mostly using "pmbootstrap build --src" [1], which essentially builds the pmOS kernel package but replaces the source with the tree I point at. I keep thinking I should try envkernel.sh [2], which is supposed to set up cross-compiling with the usual make flow. Maybe that'd work with bindeb-pkg?
I don't know how well an unpatched mainline kernel would run, I'm currently using megi's 6.7 tree [3] plus the pmOS patches as the basis for my rtw88_8723cs development [4] (if you look at the history, it's v6.7 -> orangepi-6.7 -> pmos-6.7 -> rtw88_8723cs). I know megi's kernel has some DTS patches but haven't looked too deeply into the changes, maybe some could be upstreamed together with the camera part.
Regards,
Fiona
[1] https://wiki.postmarketos.org/wiki/Pmbootstrap#Building_packages
[2] https://wiki.postmarketos.org/wiki/Compiling_kernels_with_envkernel.sh
[3] https://xff.cz/git/linux/log/?h=orange-pi-6.7
[4] https://github.com/airtower-luna/linux/commits/rtw88_8723cs/