Skip to contentSkip to conversation

There is BUG: unable to handle kernel paging request in fuse_copy_one in intel-6.8-rc2

Syzkaller & bisect Pengfei Xu 3 participants 4 messages Jan 31, 2024 Memory management

lore
Share & tools
lore

Pengfei Xu

author
#0 lore raw

Hi Mike,

Greeting!

There is "unable to handle kernel paging request in fuse_copy_one" BUG in intel-6.8-rc2:

All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/240130_184751_fuse_copy_one
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.c
Syzkaller repro syscall steps: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.prog
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/41bccc98fb7931d63d03f326a746ac4d429c1dd3_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/240130_184751_fuse_copy_one/bzImage_v6.8-rc2.tar.gz
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/kconfig_origin

Bisected and found first bad commit is:
b758fe6df50da mm/secretmem: make it on by default

Reverted above commit on top of v6.8-rc2, above issue was gone.

Syzkaller rpro.report: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.report

BUG: unable to handle page fault for address: ffff8880119a5040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 9c01067 P4D 9c01067 PUD 9c02067 PMD 11d62063 PTE 800fffffee65a060
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 751 Comm: syz-executor148 Not tainted 6.8.0-rc1-2024-01-22-intel-next-e32989111619+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:memcpy+0xc/0x20 arch/x86/lib/memcpy_64.S:38
Code: f7 e7 49 01 d5 eb ba 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 48 89 f8 48 89 d1 <f3> a4 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90
RSP: 0018:ffff88800e2af878 EFLAGS: 00010293
RAX: ffff88800e2afa80 RBX: 0000000000000010 RCX: 0000000000000010
RDX: 0000000000000010 RSI: ffff8880119a5040 RDI: ffff88800e2afa80
RBP: ffff88800e2af8c0 R08: ffff888013b14a00 R09: 0000000000000001
R10: fffffbfff0ef68c4 R11: ffffffff877b4627 R12: ffff88800e2af8f8
R13: ffff88800e2af938 R14: ffff88800e2afc38 R15: 0000000000000010
FS:  000000000100c480(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8880119a5040 CR3: 000000000f6ca000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 fuse_copy_one+0x11e/0x1a0 fs/fuse/dev.c:1007
 fuse_dev_do_write+0x186/0x26b0 fs/fuse/dev.c:1863
 fuse_dev_write+0x15f/0x200 fs/fuse/dev.c:1960
 call_write_iter include/linux/fs.h:2085 [inline]
 new_sync_write fs/read_write.c:497 [inline]
 vfs_write fs/read_write.c:590 [inline]
 vfs_write+0xa5a/0x1120 fs/read_write.c:570
 ksys_write+0x13a/0x270 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __x64_sys_write+0x7c/0xc0 fs/read_write.c:652
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x74/0x150 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x4504ed
Code: db 48 89 d8 5b 5d 41 5c 41 5d 41 5e c3 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff15c70d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004504ed
RDX: 0000000000000050 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00000000ffffffff R08: 00000000ffffffff R09: 0000000000000000
R10: 00007fff15c70d70 R11: 0000000000000246 R12: 0000000000412190
R13: 0000000000000000 R14: 00000000004004e8 R15: 0000000000000000
 </TASK>
Modules linked in:
CR2: ffff8880119a5040
---[ end trace 0000000000000000 ]---

Hope it's helpful.

---

If you don't need the following environment to reproduce the problem or if you already have one reproduced environment, please ignore the following information.

How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cd repro_vm_env
tar -xvf repro_vm_env.tar.gz
cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
// start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
// You could change the bzImage_xxx as you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@localhost

After login vm(virtual machine) successfully, you could transfer reproduced binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o repro repro.c
scp -P 10023 repro root@localhost:/root/

Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc has

Fill the bzImage file into above start3.sh to load the target kernel in vm.

Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp make
make install

Best Regards,
Thanks!

#1 lore raw
Quoted 15 lines · Pengfei Xu

Hi Mike,

Greeting!

There is "unable to handle kernel paging request in fuse_copy_one" BUG in intel-6.8-rc2:

All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/240130_184751_fuse_copy_one
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.c
Syzkaller repro syscall steps: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.prog
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/41bccc98fb7931d63d03f326a746ac4d429c1dd3_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/240130_184751_fuse_copy_one/bzImage_v6.8-rc2.tar.gz
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/kconfig_origin

Quoted 2 lines

Bisected and found first bad commit is:
b758fe6df50da mm/secretmem: make it on by default

Sounds like we manage to access a page that has its direct map removed -- either because it's actual secretmem memory, or because we fail to restore the direct map.

Quoted 101 lines

Reverted above commit on top of v6.8-rc2, above issue was gone.

Syzkaller rpro.report: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.report

BUG: unable to handle page fault for address: ffff8880119a5040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 9c01067 P4D 9c01067 PUD 9c02067 PMD 11d62063 PTE 800fffffee65a060
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 751 Comm: syz-executor148 Not tainted 6.8.0-rc1-2024-01-22-intel-next-e32989111619+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:memcpy+0xc/0x20 arch/x86/lib/memcpy_64.S:38
Code: f7 e7 49 01 d5 eb ba 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 48 89 f8 48 89 d1 <f3> a4 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90
RSP: 0018:ffff88800e2af878 EFLAGS: 00010293
RAX: ffff88800e2afa80 RBX: 0000000000000010 RCX: 0000000000000010
RDX: 0000000000000010 RSI: ffff8880119a5040 RDI: ffff88800e2afa80
RBP: ffff88800e2af8c0 R08: ffff888013b14a00 R09: 0000000000000001
R10: fffffbfff0ef68c4 R11: ffffffff877b4627 R12: ffff88800e2af8f8
R13: ffff88800e2af938 R14: ffff88800e2afc38 R15: 0000000000000010
FS:  000000000100c480(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8880119a5040 CR3: 000000000f6ca000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
  <TASK>
  fuse_copy_one+0x11e/0x1a0 fs/fuse/dev.c:1007
  fuse_dev_do_write+0x186/0x26b0 fs/fuse/dev.c:1863
  fuse_dev_write+0x15f/0x200 fs/fuse/dev.c:1960
  call_write_iter include/linux/fs.h:2085 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write fs/read_write.c:590 [inline]
  vfs_write+0xa5a/0x1120 fs/read_write.c:570
  ksys_write+0x13a/0x270 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x7c/0xc0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0x74/0x150 arch/x86/entry/common.c:83
  entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x4504ed
Code: db 48 89 d8 5b 5d 41 5c 41 5d 41 5e c3 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff15c70d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004504ed
RDX: 0000000000000050 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00000000ffffffff R08: 00000000ffffffff R09: 0000000000000000
R10: 00007fff15c70d70 R11: 0000000000000246 R12: 0000000000412190
R13: 0000000000000000 R14: 00000000004004e8 R15: 0000000000000000
  </TASK>
Modules linked in:
CR2: ffff8880119a5040
---[ end trace 0000000000000000 ]---

Hope it's helpful.

---

If you don't need the following environment to reproduce the problem or if you already have one reproduced environment, please ignore the following information.

How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cd repro_vm_env
tar -xvf repro_vm_env.tar.gz
cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
// start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
// You could change the bzImage_xxx as you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@localhost

After login vm(virtual machine) successfully, you could transfer reproduced binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o repro repro.c
scp -P 10023 repro root@localhost:/root/

Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc has

Fill the bzImage file into above start3.sh to load the target kernel in vm.

Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp make
make install

Best Regards,
Thanks!

Signature · 3 lines
Cheers,

David / dhildenb
#2 lore raw
Quoted 16 lines · David Hildenbrand
Quoted 15 lines · Pengfei Xu

Hi Mike,

Greeting!

There is "unable to handle kernel paging request in fuse_copy_one" BUG in intel-6.8-rc2:

All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/240130_184751_fuse_copy_one
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.c
Syzkaller repro syscall steps: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.prog
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/41bccc98fb7931d63d03f326a746ac4d429c1dd3_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/240130_184751_fuse_copy_one/bzImage_v6.8-rc2.tar.gz
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/kconfig_origin

Quoted 6 lines
Quoted 2 lines

Bisected and found first bad commit is:
b758fe6df50da mm/secretmem: make it on by default

Sounds like we manage to access a page that has its direct map removed -- either because it's actual secretmem memory, or because we fail to restore the direct map.

Judging by the repro code and the registers, it's an access to secretmem.

The call
syscall(__NR_write, /*fd=*/r[0], /*arg=*/0x20000040ul, /*len=*/0x50ul);

will eventually get to

memcpy(0xffff88800e2afa80, 0xffff8880119a5040, 0x0000000000000010)

and I think that 0x20000040 in repro address space maps to 0xffff8880119a5040 in the direct map.

So it looks like secretmem actually works :)

From memfd_secret(2):

The memory region is removed from the kernel page tables and only the page tables of the processes holding the file descriptor map the corresponding physical memory. (Thus, the pages in the region can't be accessed by the kernel itself, so that, for example, pointers to the region can't be passed to system calls.)

Quoted 106 lines
Quoted 100 lines

Reverted above commit on top of v6.8-rc2, above issue was gone.

Syzkaller rpro.report: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.report

BUG: unable to handle page fault for address: ffff8880119a5040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 9c01067 P4D 9c01067 PUD 9c02067 PMD 11d62063 PTE 800fffffee65a060
Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 751 Comm: syz-executor148 Not tainted 6.8.0-rc1-2024-01-22-intel-next-e32989111619+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:memcpy+0xc/0x20 arch/x86/lib/memcpy_64.S:38
Code: f7 e7 49 01 d5 eb ba 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 48 89 f8 48 89 d1 <f3> a4 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90
RSP: 0018:ffff88800e2af878 EFLAGS: 00010293
RAX: ffff88800e2afa80 RBX: 0000000000000010 RCX: 0000000000000010
RDX: 0000000000000010 RSI: ffff8880119a5040 RDI: ffff88800e2afa80
RBP: ffff88800e2af8c0 R08: ffff888013b14a00 R09: 0000000000000001
R10: fffffbfff0ef68c4 R11: ffffffff877b4627 R12: ffff88800e2af8f8
R13: ffff88800e2af938 R14: ffff88800e2afc38 R15: 0000000000000010
FS:  000000000100c480(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8880119a5040 CR3: 000000000f6ca000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
  <TASK>
  fuse_copy_one+0x11e/0x1a0 fs/fuse/dev.c:1007
  fuse_dev_do_write+0x186/0x26b0 fs/fuse/dev.c:1863
  fuse_dev_write+0x15f/0x200 fs/fuse/dev.c:1960
  call_write_iter include/linux/fs.h:2085 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write fs/read_write.c:590 [inline]
  vfs_write+0xa5a/0x1120 fs/read_write.c:570
  ksys_write+0x13a/0x270 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x7c/0xc0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0x74/0x150 arch/x86/entry/common.c:83
  entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x4504ed
Code: db 48 89 d8 5b 5d 41 5c 41 5d 41 5e c3 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff15c70d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004504ed
RDX: 0000000000000050 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00000000ffffffff R08: 00000000ffffffff R09: 0000000000000000
R10: 00007fff15c70d70 R11: 0000000000000246 R12: 0000000000412190
R13: 0000000000000000 R14: 00000000004004e8 R15: 0000000000000000
  </TASK>
Modules linked in:
CR2: ffff8880119a5040
---[ end trace 0000000000000000 ]---

Hope it's helpful.

---

If you don't need the following environment to reproduce the problem or if you already have one reproduced environment, please ignore the following information.

How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cd repro_vm_env
tar -xvf repro_vm_env.tar.gz
cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
// start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
// You could change the bzImage_xxx as you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@localhost

After login vm(virtual machine) successfully, you could transfer reproduced binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o repro repro.c
scp -P 10023 repro root@localhost:/root/

Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc has

Fill the bzImage file into above start3.sh to load the target kernel in vm.

Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp make
make install

Best Regards,
Thanks!

Signature · 3 lines
Cheers,

David / dhildenb
Signature · 2 lines
Sincerely yours,
Mike.
#3 lore raw
Quoted 29 lines · Mike Rapoport
Quoted 16 lines · David Hildenbrand
Quoted 15 lines · Pengfei Xu

Hi Mike,

Greeting!

There is "unable to handle kernel paging request in fuse_copy_one" BUG in intel-6.8-rc2:

All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/240130_184751_fuse_copy_one
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.c
Syzkaller repro syscall steps: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/repro.prog
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/bisect_info.log
Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/41bccc98fb7931d63d03f326a746ac4d429c1dd3_dmesg.log
bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/240130_184751_fuse_copy_one/bzImage_v6.8-rc2.tar.gz
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/240130_184751_fuse_copy_one/kconfig_origin

Quoted 6 lines
Quoted 2 lines

Bisected and found first bad commit is:
b758fe6df50da mm/secretmem: make it on by default

Sounds like we manage to access a page that has its direct map removed -- either because it's actual secretmem memory, or because we fail to restore the direct map.

Judging by the repro code and the registers, it's an access to secretmem.

The call
syscall(__NR_write, /*fd=*/r[0], /*arg=*/0x20000040ul, /*len=*/0x50ul);

Quoted 8 lines

will eventually get to

memcpy(0xffff88800e2afa80, 0xffff8880119a5040, 0x0000000000000010)

and I think that 0x20000040 in repro address space maps to 0xffff8880119a5040 in the direct map.

So it looks like secretmem actually works :)

Good. How can we prevent triggering BUGs? The write system call should fail gracefully (and I thought it would).

Signature · 3 lines
Cheers,

David / dhildenb