Skip to contentSkip to conversation

virtio-snd: improve PCM command lifecycle description

PATCH Superseded Matias Ezequiel Vara Larsen 1 participant 1 message Feb 27, 2024

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 virtio-snd: improve PCM command lifecycle description

The PCM command lifecycle can be described as a state-machine in which the switching between states is triggered by commands. This commit explicitly presents the different states and the commands that are allowed in a given state. This commit leaves to the implementation the decision the state reached depending on the command.

---
 device-types/sound/description.tex | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)
device-types/sound/description.tex +19 -7
index 54c9c8e..55e93af 100644
@@ -397,9 +397,21 @@ \subsubsection{PCM Control Messages}\label{sec:Device Types / Sound Device / Dev
 \item[\field{stream_id}] specifies a PCM stream identifier from 0 to \field{streams} - 1.
 \end{description}
 
-\paragraph{PCM Command Lifecycle}
+\paragraph{PCM Command Lifecycle State Machine}
 
-A PCM stream has the following command lifecycle:
+A PCM stream can be represented by a state-machine made up of the following
+states:
+\begin{description}
+\item SET PARAMETERS
+\item PREPARE
+\item START
+\item STOP
+\item RELEASE
+\end{description}
+
+A command triggers the transition between these states. To what state to switch
+depends on the implementation. Depending on the state, only certain commands
+are valid. An error may occur if an invalid command is triggered.
 
 \begin{enumerate}
 \item SET PARAMETERS
@@ -407,13 +419,13 @@ \subsubsection{PCM Control Messages}\label{sec:Device Types / Sound Device / Dev
 The driver negotiates the stream parameters (format, transport, etc) with
 the device.
 
-Possible valid transitions: set parameters, prepare.
+Possible valid commands: set parameters, prepare.
 
 \item PREPARE
 
 The device prepares the stream (allocates resources, etc).
 
-Possible valid transitions: set parameters, prepare, start, release.
+Possible valid commands: set parameters, prepare, start, release.
 
 \item Output only: the driver transfers data for pre-buffing.
 
@@ -421,7 +433,7 @@ \subsubsection{PCM Control Messages}\label{sec:Device Types / Sound Device / Dev
 
 The device starts the stream (unmute, putting into running state, etc).
 
-Possible valid transitions: stop.
+Possible valid commands: stop.
 
 \item The driver transfers data to/from the stream.
 
@@ -429,13 +441,13 @@ \subsubsection{PCM Control Messages}\label{sec:Device Types / Sound Device / Dev
 
 The device stops the stream (mute, putting into non-running state, etc).
 
-Possible valid transitions: start, release.
+Possible valid commands: start, release.
 
 \item RELEASE
 
 The device releases the stream (frees resources, etc).
 
-Possible valid transitions: set parameters, prepare.
+Possible valid commands: set parameters, prepare.
 
 \end{enumerate}
 
Signature · 18 lines
2.41.0


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/