perf ftrace latency: Fix unit on histogram first entry when using --use-nsec
Arnaldo Carvalho de Melo
maintainerPATCH 1/1 perf ftrace latency: Fix unit on histogram first entry when using --use-nsec
The use_nsec arg wasn't being taken into account when printing the first histogram entry, fix it:
root@number:~# perf ftrace latency --use-nsec -T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 125 | |
64 - 128 ns | 335 | |
128 - 256 ns | 2155 | #### |
256 - 512 ns | 9996 | ################### |
512 - 1024 ns | 4958 | ######### |
1 - 2 us | 4636 | ######### |
2 - 4 us | 1053 | ## |
4 - 8 us | 15 | |
8 - 16 us | 1 | |
16 - 32 us | 0 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - ... ms | 0 | |
root@number:~#After:
root@number:~# perf ftrace latency --use-nsec -T switch_mm_irqs_off -a sleep 2
# DURATION | COUNT | GRAPH |
0 - 1 ns | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 19 | |
64 - 128 ns | 94 | |
128 - 256 ns | 2191 | #### |
256 - 512 ns | 9719 | #################### |
512 - 1024 ns | 5330 | ########### |
1 - 2 us | 4104 | ######## |
2 - 4 us | 807 | # |
4 - 8 us | 9 | |
8 - 16 us | 0 | |
16 - 32 us | 0 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - ... ms | 0 | |
root@number:~#Fixes 84005bb6148618cc ("perf ftrace latency: Add -n/--use-nsec option")
Cc Adrian Hunter <[email protected]>
Cc Gabriele Monaco <[email protected]>
Cc Ian Rogers <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Namhyung Kim <[email protected]>
Signed-off-by Arnaldo Carvalho de Melo <[email protected]>
--- tools/perf/builtin-ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/builtin-ftrace.c +1 -1
@@ -815,7 +815,7 @@ static void display_histogram(int buckets[], bool use_nsec) bar_len = buckets[0 ] * bar_total / total;printf (" %4d - %-4d %s | %10d | %.*s%*s |\n" , -0 ,1 ,"us" , buckets[0 ], bar_len, bar, bar_total - bar_len,"" ); +0 ,1 , use_nsec ?"ns" :"us" , buckets[0 ], bar_len, bar, bar_total - bar_len,"" );for (i =1 ; i <NUM_BUCKET -1 ; i++) {int start = (1 << (i -1 ));
Signature · 1 line
2.47.0
Quoted 29 lines · Arnaldo Carvalho de Melo
The
use_nsecarg wasn't being taken into account when printing the first histogram entry, fix it:root@number:~# perf ftrace latency --use-nsec -T switch_mm_irqs_off -a sleep 2 # DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 ns | 0 | | 2 - 4 ns | 0 | | 4 - 8 ns | 0 | | 8 - 16 ns | 0 | | 16 - 32 ns | 0 | | 32 - 64 ns | 125 | | 64 - 128 ns | 335 | | 128 - 256 ns | 2155 | #### | 256 - 512 ns | 9996 | ################### | 512 - 1024 ns | 4958 | ######### | 1 - 2 us | 4636 | ######### | 2 - 4 us | 1053 | ## | 4 - 8 us | 15 | | 8 - 16 us | 1 | | 16 - 32 us | 0 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - ... ms | 0 | | root@number:~#
Quoted 1 line
[...]
Applied to perf-tools-next, thanks!
Best regards,
Namhyung