Skip to contentSkip to conversation

firewall on dns server

DISCUSSION Askar 2 participants 2 messages Jan 19, 2005

lore
Share & tools
lore

Askar

author
#0 lore raw

Greetings, I'm pasting my firewall script which is running on our company cache only dns server (serving more then 700+ users), this server uses one of our company primary dns server as "Forwarder". what I want gurus in this list give a look to it and let me know if im missing something or doing any mistake.
OS: slackware kernel 2.6.10, netfilter compiled in kernel. ###script
# Remove any existing rules from all chains

# traceroute usually uses -S 32769:65535 -D 33434:33523
TRACEROUTE_SRC_PORTS="32769:65535"
TRACEROUTE_DEST_PORTS="33434:33523"

#Clear \ Flush all the rules from the different chains and tables

iptables --flush

iptables --flush INPUT            #Flush the INPUT chain
iptables --flush OUTPUT           #Flush the OUTPUT chain
iptables --flush FORWARD          #Flush the FORWARD chain
iptables -t nat --flush           #Flush the nat table
iptables -t mangle --flush        #Flush the mangle table
iptables --delete-chain           #Delete any pre-existing chains
iptables -t nat --delete-chain    #Delete any pre-existing chains from nat table

iptables -t mangle --delete-chain #Delete any pre-existing chains from the mangle table

#Setting the default Policies for the chains

iptables --policy INPUT DROP      #Setting the default policy for INPUT chain
iptables --policy FORWARD DROP    #Setting the default plicy for FORWARD chain
iptables --policy OUTPUT DROP     #Setting the default policy for the

OUTPUT chain

# Unlimited traffic on the loopback interface # Do immediately in case of firewall script errors! iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

# furtive port scan
iptables -A INPUT -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit
--limit 1/s -j ACCEPT
###############################################################
# Using Connection State to By-pass Rule Checking

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
###############################################################
# Source Address Spoofing and Other Bad Addresses
# Refuse packets claiming to be from the loopback interface (martian)
iptables -A INPUT -s 127.0.0.1 -j DROP
iptables -A FORWARD -s 127.0.0.1 -j DROP
###############################################################
iptables -A INPUT -m state --state INVALID -j LOG --log-prefix "INVALID input: " iptables -A INPUT -m state --state INVALID -j DROP
iptables -A OUTPUT -m state --state INVALID -j LOG --log-prefix "INVALID output: "
iptables -A OUTPUT -m state --state INVALID -j DROP

##################################################################################
## allow ssh from trusted IPs
iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT
#################################################################
iptables -A INPUT -p udp --dport 53 -j ACCEPT
iptables -A INPUT -p tcp --dport 53 -j ACCEPT
################################################################
iptables -A OUTPUT -s 0/0 -d 0/0 -p tcp --dport 53 -j ACCEPT iptables -A OUTPUT -s 0/0 -d 0/0 -p udp --dport 53 -j ACCEPT ########### Allow Traceroute
iptables -A OUTPUT -o eth0 -p udp --sport $TRACEROUTE_SRC_PORTS --dport $TRACEROUTE_DEST_PORTS -m state --stat
e NEW -j ACCEPT
########### Allow WHOIS
iptables -A OUTPUT -o eth0 -p tcp --dport 43 -m state --state NEW -j ACCEPT

### End script

regards
Askar

Signature · 2 lines
(after bouncing head on desk for days trying to get mine working, I'll make
your life a little easier)
#1 lore raw
Quoted 22 lines · Askar

Greetings, I'm pasting my firewall script which is running on our company cache only dns server (serving more then 700+ users), this server uses one of our company primary dns server as "Forwarder". what I want gurus in this list give a look to it and let me know if im missing something or doing any mistake.
OS: slackware kernel 2.6.10, netfilter compiled in kernel. ###script
# Remove any existing rules from all chains

# traceroute usually uses -S 32769:65535 -D 33434:33523
TRACEROUTE_SRC_PORTS="32769:65535"
TRACEROUTE_DEST_PORTS="33434:33523"

#Clear \ Flush all the rules from the different chains and tables

iptables --flush

iptables --flush INPUT            #Flush the INPUT chain
iptables --flush OUTPUT           #Flush the OUTPUT chain
iptables --flush FORWARD          #Flush the FORWARD chain
iptables -t nat --flush           #Flush the nat table
iptables -t mangle --flush        #Flush the mangle table
iptables --delete-chain           #Delete any pre-existing chains
iptables -t nat --delete-chain    #Delete any pre-existing chains from nat table
Quoted 2 lines

iptables -t mangle --delete-chain #Delete any pre-existing chains from the mangle table

you can slim the above down to:

for table in mangle nat filter; do
iptables -t $table -F
iptables -t $table -X
done

Quoted 6 lines

#Setting the default Policies for the chains

iptables --policy INPUT DROP      #Setting the default policy for INPUT chain
iptables --policy FORWARD DROP    #Setting the default plicy for FORWARD chain
iptables --policy OUTPUT DROP     #Setting the default policy for the

OUTPUT chain

Quoted 8 lines

# Unlimited traffic on the loopback interface # Do immediately in case of firewall script errors! iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

# furtive port scan
iptables -A INPUT -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit
--limit 1/s -j ACCEPT

why rate-limit and accept packets with just the RST flag set? valid RST packets should have the ACK bit set as well. it also seems strange that you would choose to single out a RST scan, and not bother with something like a SYN-FIN scan...i dunno, i'm sure you have your reasons.

Quoted 11 lines

###############################################################
# Using Connection State to By-pass Rule Checking

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
###############################################################
# Source Address Spoofing and Other Bad Addresses
# Refuse packets claiming to be from the loopback interface (martian)
iptables -A INPUT -s 127.0.0.1 -j DROP
iptables -A FORWARD -s 127.0.0.1 -j DROP

as your parentheses indicate--the linux kernel routing code will drop these packets as martians before the packets ever gets to the netfilter hooks--so these rules are basically unnecessary.

Quoted 7 lines

###############################################################
iptables -A INPUT -m state --state INVALID -j LOG --log-prefix "INVALID input: " iptables -A INPUT -m state --state INVALID -j DROP
iptables -A OUTPUT -m state --state INVALID -j LOG --log-prefix "INVALID output: "
iptables -A OUTPUT -m state --state INVALID -j DROP

Quoted 13 lines

##################################################################################
## allow ssh from trusted IPs
iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT iptables -A INPUT -i eth0 -s xxx.xxx.xxx.x -p tcp -m tcp --dport 22 -j ACCEPT
#################################################################
iptables -A INPUT -p udp --dport 53 -j ACCEPT
iptables -A INPUT -p tcp --dport 53 -j ACCEPT
################################################################
iptables -A OUTPUT -s 0/0 -d 0/0 -p tcp --dport 53 -j ACCEPT iptables -A OUTPUT -s 0/0 -d 0/0 -p udp --dport 53 -j ACCEPT

stylistic note: why did you use the "-s 0/0 -d 0/0" in the OUTPUT rules but not the INPUT rules. personally--i think the INPUT rules are much easier to read, as the "-s 0/0 -d 0/0" is unnecessary.

Quoted 8 lines

########### Allow Traceroute
iptables -A OUTPUT -o eth0 -p udp --sport $TRACEROUTE_SRC_PORTS --dport $TRACEROUTE_DEST_PORTS -m state --stat
e NEW -j ACCEPT
########### Allow WHOIS
iptables -A OUTPUT -o eth0 -p tcp --dport 43 -m state --state NEW -j ACCEPT

### End script

seems odd to me that you would allow traceroute and whois outbound, but not pings. for that matter--in addition to allowing pings outbound--i would also allow pings inbound from the company networks--for troubleshooting purposes.

i'm not familiar with how slackware deals with updates and patches, but on my machines--i normally need rules to allow HTTP or FTP outbound to my local update mirror.

also--i always run some type of ntpd on my servers to keep their time in sync--which would require an outbound rule for UDP port 123 to the time server.

-j

--
"Boy, if you want anything in this life, you have to work for it. Now
be quiet while I listen for these lottery numbers."
--The Simpsons