Attempting to use 2 KWorld PlusTV Dual DVB-T PCI tuners
Hi,
I'm attempting to use 2 (I believe identical) KWorld PlusTV Dual DVB-T PCI
tuners in my system. I have downloaded the firmware and at boot can see the
cards being (nearly) successfully detected. It seems that both turners are
being detected on one card, but only one on the second.
I haven't had much time to test the cards and I'm afraid I'm not near the
box to be able to provide the boot log at the moment. Looking through the
code I can see "static struct dvb_usb_device_properties
af9015_properties[3];" here:
http://lxr.linux.no/#linux+v2.6.32/drivers/media/dvb/dvb-usb/af9015.c#L43
Which suggests to me that it's only going to be able to register 3 tuners
(or is it 3 cards?), is that the case?
Martyn
Ah, looks like it was a PCI slot thing, moved the second card into a
different slot and all seems to be working well. Sorry for the noise,
Martyn
On Wed, 09 Jun 2010 12:08:25 +0100, Martyn Welch <[email protected]>
Quoted 5 lines · wrote:
Hi,
I'm attempting to use 2 (I believe identical) KWorld PlusTV Dual DVB-T
PCI
Quoted 1 line
tuners in my system. I have downloaded the firmware and at boot can see
the
Quoted 1 line
cards being (nearly) successfully detected. It seems that both turners
are
Quoted 5 lines
being detected on one card, but only one on the second.
I haven't had much time to test the cards and I'm afraid I'm not near
the
Quoted 1 line
box to be able to provide the boot log at the moment. Looking through
the
Quoted 7 lines
code I can see "static struct
dvb_usb_device_propertiesaf9015_properties[3];" here:
http://lxr.linux.no/#linux+v2.6.32/drivers/media/dvb/dvb-usb/af9015.c#L43
Quoted 3 lines
Which suggests to me that it's only going to be able to register 3
tuners
Quoted 5 lines
(or is it 3 cards?), is that the case?
Martyn