: ISAPNP cards (opl3sa2 in particular) are not detected properly on 2.6 kernels
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1326>
======================================================================
Reported By: ahaning Assigned To: perex ====================================================================== Project: ALSA - utils Issue ID: 1326 Category: alsaconf Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 08-10-2005 03:39 CEST Last Modified: 08-10-2005 14:55 CEST
======================================================================
Summary: ISAPNP cards (opl3sa2 in particular) are not
detected properly on 2.6 kernels
Description:
When brute-force detecting my OPL3SA2 card, the IRQ and DMA1/DMA2 settings are incorrectly detected by alsaconf from alsa-utils. For example, the default BIOS settings are IRQ=11, DMA1=0, DMA2=1, but alsaconf detects IRQ=5, DMA1=1, DMA2=0. No matter the BIOS settings, alsaconf always detects those settings (IRQ=5, DMA1=1, DMA2=0). If I set the BIOS settings to that, then the card will make sound (after touching the mixer while playing audio).
According to perex (author of the opl3sa2 driver):
"The alsaconf tries to gather free resources (irq/dma/ports) from the /proc filesystem. It might be extended to gather this information also from /sys filesystem."
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000879 (snd_)opl3sa2 (isa) doesn't work (fails...
======================================================================
----------------------------------------------------------------------
perex - 08-10-05 13:28
----------------------------------------------------------------------
I've uploaded a new alsaconf which should do it in the described way. Could you give a try?
Note that it non-pnp probing/setup might fail anyway, but the resources should be selected more correctly.
----------------------------------------------------------------------
ahaning - 08-10-05 14:55
----------------------------------------------------------------------
I tried the above alsaconf. The IRQ (irq=11) is now selected correctly.
However, I *think* dma1=5 and dma2=3 are incorrect. I'm starting to doubt this now since I did mess with the BIOS settings recently. I'll check again when I have local access to the machine.
Thanks.
Issue History
Date Modified Username Field Change
======================================================================
08-10-05 03:39 ahaning New Issue
08-10-05 03:39 ahaning Distribution => Slackware 9.1 (but
it's not distribution-specific)
08-10-05 03:39 ahaning Kernel Version => 2.6.12.2 08-10-05 13:26 perex Status new => assigned 08-10-05 13:26 perex Assigned To => perex 08-10-05 13:26 perex File Added: alsaconf 08-10-05 13:28 perex Note Added: 0005747 08-10-05 13:29 perex Project ALSA - driver => ALSA - utils 08-10-05 13:30 perex Relationship added related to 0000879 08-10-05 13:31 perex Category 1_OTHERS => alsaconf 08-10-05 14:55 ahaning Note Added: 0005748
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf