Skip to contentSkip to conversation

Old ipw2200 code in 2.6.13-git3 and 2.6.13-mm1

DISCUSSION Miles Lane 2 participants 2 messages Sep 3, 2005 – Sep 5, 2005

lore
Share & tools
lore

Miles Lane

author
#0 lore raw

The most recent IPW2200 release is 1.0.6. Now we have:

          #define IPW2200_VERSION "1.0.0"
in 2.6.13-git2.  Here, the version of firmware is set to the last release:
          ipw2200.c:#define IPW_FW_MAJOR_VERSION 2
          ipw2200.c:#define IPW_FW_MINOR_VERSION 2

The most recent firmware release is 2.3.

When I attempt to bring up the ipw2200 network connection to a wireless hub with WPA2 encrypted connection, I get the following error:

WEXT auth param 7 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported

Can we please get the latest IPW2200 code into the development kernels soon?

Many thanks,
Miles

#1 lore raw

On Fri, Sep 02, 2005 at 08:48:28PM -0700, Miles Lane wrote:

[snip]

Quoted 1 line

Can we please get the latest IPW2200 code into the development kernels soon?

Seconded. I haven't rebuilt the 1.0.6 code against the 2.6.13-git kernels, but my 2.6.13-rc4 build with 1.0.6 ipw2200 in it seems much more stable and dependable at starting up a network than 2.6.13-git-current does.

(For example, I had to do a full power-cycle to get things working again after I ran into a "failed to send TX_POWER" issue - I've never seen that before, but I've never run the 1.0.0 driver before today.)

Signature · 2 lines
Ryan Anderson
  sometimes Pug Majere