Skip to contentSkip to conversation

GPIO device class driver

DISCUSSION Robert Schwebel 4 participants 5 messages Dec 21, 2005 – Feb 2, 2006 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

Ivan,

Quoted 5 lines · Ivan Korzakow

I read about a generic device class driver (http://marc.theaimsgroup.com/?l=
linux-kernel&m=109419719600753&w=2) for GPIO. I wanted to know if anything generic finally came out of the dicussion ?
I'm willing to write a gpio driver and I am considering taking Robert Schwebel patch into it if nothing exist in the main line.

As far as I know there is nothing new available yet; the LED framework people have don some things, but it should be "above" GPIO. This morning we have discussed serveral things which could be improved in our code; if you are interested I'll keep you informed about the progress.

Robert

Signature · 5 lines
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9
#2 lore raw
Quoted 9 lines · Robert Schwebel

Ivan,

Quoted 5 lines · Ivan Korzakow

I read about a generic device class driver (http://marc.theaimsgroup.com/?l=
linux-kernel&m=109419719600753&w=2) for GPIO. I wanted to know if anything generic finally came out of the dicussion ?
I'm willing to write a gpio driver and I am considering taking Robert Schwebel patch into it if nothing exist in the main line.

Quoted 6 lines

As far as I know there is nothing new available yet; the LED framework people have don some things, but it should be "above" GPIO. This morning we have discussed serveral things which could be improved in our code; if you are interested I'll keep you informed about the progress.

Robert

Any further progress on this. I'm looking at the GPIO's on an embedded PowerPC and would prefer to produce a driver towards a standard kernel interface. I'm also happy to help on the standard interface if it needs some work.

- kumar

#3 lore raw
Quoted 4 lines · Kumar Gala

Any further progress on this. I'm looking at the GPIO's on an embedded PowerPC and would prefer to produce a driver towards a standard kernel interface. I'm also happy to help on the standard interface if it needs some work.

Sorry, no progress so far on our side.

Robert

Signature · 5 lines
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9
#4 lore raw

2006/2/1, Robert Schwebel <[email protected]>:

Quoted 8 lines · Kumar Gala
Quoted 4 lines

Any further progress on this. I'm looking at the GPIO's on an embedded PowerPC and would prefer to produce a driver towards a standard kernel interface. I'm also happy to help on the standard interface if it needs some work.

Sorry, no progress so far on our side.

Hi,

I worked on a GPIO driver, starting from the work of Robert Schwebel. I wrote something that suited my needs, but I kept in mind the idea of a generic layer. It's worth what it's worth, but i'm sending it in case it might help someone.
Basically I nearly didn't touch the sysfs part of Robert's driver. I added the possibility to register a block of GPIO pins, and to handle interrupts. The platform specific layer registers itself with this generic layer and passes all the required platform dependant functions and parameters through a struct.
Attached is the generic layer gpio.c and I moved the header in include/linux/gpio.h
Feel free to comment, criticize, reject :-)

Ivan

#5 lore raw
In reply to Robert Schwebel
Quoted 7 lines · Robert Schwebel
Quoted 4 lines · Kumar Gala

Any further progress on this. I'm looking at the GPIO's on an embedded PowerPC and would prefer to produce a driver towards a standard kernel interface. I'm also happy to help on the standard interface if it needs some work.

Sorry, no progress so far on our side.

Is there a list of things to do?

- kumar