Skip to contentSkip to conversation

smdk2413 support?

U-Boot-Users Allen Curtis 2 participants 3 messages Oct 19, 2006 – Oct 20, 2006

lore
Share & tools
lore
#0 lore raw

Does anyone have a smdk2413 patch for U-Boot?

We have a very old, mutant version from Samsung which supports the 2413 processor with NAND boot capability. I am working on porting this functionality to the latest state of development but time is running short. Most of the processor support has been implemented but NAND and NAND boot support are still a problem.

If you have a 2412 version, that would also help.

TIA

- Allen

#1 lore raw

Hi Allen,

Quoted 5 lines · Allen Curtis

We have a very old, mutant version from Samsung which supports the 2413 processor with NAND boot capability. I am working on porting this functionality to the latest state of development but time is running short. Most of the processor support has been implemented but NAND and NAND boot support are still a problem.

Please take a look at the new NAND booting support in U-Boot. It's implemented right now only for PPC440 with NAND flash controller, but it can be extended to support other platforms as well.

So take a look at the "nand_spl" directory and
the "doc/README.nand-boot-ppc440" file for further information.

Best regards,
Stefan

#2 lore raw
Quoted 8 lines · Allen Curtis
Quoted 6 lines

We have a very old, mutant version from Samsung which supports the 2413
processor with NAND boot capability. I am working on porting this functionality to the latest state of development but time is running short. Most of the processor support has been implemented but NAND and NAND boot support are still a problem.

Quoted 9 lines

Please take a look at the new NAND booting support in U-Boot. It's implemented
right now only for PPC440 with NAND flash controller, but it can be extended
to support other platforms as well.

So take a look at the "nand_spl" directory and
the "doc/README.nand-boot-ppc440" file for further information.

I have looked at this code. Thank you for the pointer. First I need to complete the support for the processor.

Quoted 3 lines

Best regards,
Stefan