Skip to contentSkip to conversation

mmc1: mmc_select_hs400 failed, error -110 / boot regression on Lenovo IdeaPad 1 15ADA7

regression v6.12.30..v6.12.32 Salvatore Bonaccorso 4 participants 11 messages Jun 20, 2025 – Jun 25, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

#regzbot introduced v6.12.30..v6.12.32
#regzbot link: https://bugs.debian.org/1107979
#regzbot link: https://bbs.archlinux.org/viewtopic.php?id=306024

Regards,
Salvatore

#1 lore raw
Quoted 26 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

Quoted 6 lines

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

#regzbot introduced v6.12.30..v6.12.32
#regzbot link: https://bugs.debian.org/1107979
#regzbot link: https://bbs.archlinux.org/viewtopic.php?id=306024

*sigh* apologies for the "mess", the actual right report is
https://bugs.debian.org/1108065 (where #1107979 at least has similarities or might have the same root cause).

#regzbot link: https://bugs.debian.org/1108065

Regards,
Salvatore

#2 lore raw

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Quoted 15 lines
Quoted 4 lines

#regzbot introduced v6.12.30..v6.12.32
#regzbot link: https://bugs.debian.org/1107979
#regzbot link: https://bbs.archlinux.org/viewtopic.php?id=306024

*sigh* apologies for the "mess", the actual right report is
https://bugs.debian.org/1108065 (where #1107979 at least has similarities or might have the same root cause).

#regzbot link: https://bugs.debian.org/1108065

Regards,
Salvatore

#3 lore raw
Quoted 33 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

Quoted 7 lines

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Thanks.

Jeremy, could you test the (unofficial!) packages at
https://people.debian.org/~carnil/tmp/linux/1108065/ which consist of 6.12.33-1 with the revert patch applied on top?

I have put a sha256sum file and signed it with my key in the Debian keyring for verification.

Regards,
Salvatore

#4 lore raw
Quoted 40 lines · Salvatore Bonaccorso
Quoted 32 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

Quoted 7 lines

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Quoted 8 lines

Thanks.

Jeremy, could you test the (unofficial!) packages at
https://people.debian.org/~carnil/tmp/linux/1108065/ which consist of 6.12.33-1 with the revert patch applied on top?

I have put a sha256sum file and signed it with my key in the Debian keyring for verification.

Do I need all those packages?

Signature · 6 lines
Sincerely,
Jeremy Lincicome W0JRL
JL Applied Technologies:
https://jlappliedtechnologies.com
SkyHubLink System:
https://skyhublink.com
#5 lore raw

Hi,

Quoted 43 lines · Jeremy Lincicome
Quoted 42 lines · Salvatore Bonaccorso
Quoted 32 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

Quoted 7 lines

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Thanks.

Quoted 8 lines
Quoted 6 lines

Jeremy, could you test the (unofficial!) packages at
https://people.debian.org/~carnil/tmp/linux/1108065/ which consist of 6.12.33-1 with the revert patch applied on top?

I have put a sha256sum file and signed it with my key in the Debian keyring for verification.

Do I need all those packages?

Just the linux-image-6.12+unreleased-amd64-unsigned package to test the patched kernel image and modules.

Regards,
Salvatore

#6 lore raw

Hi,

Quoted 50 lines · Salvatore Bonaccorso

Hi,

Quoted 47 lines · Jeremy Lincicome
Quoted 46 lines · Salvatore Bonaccorso
Quoted 32 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is athttps://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings bell for you?

Quoted 7 lines

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Thanks.

Jeremy, could you test the (unofficial!) packages at
https://people.debian.org/~carnil/tmp/linux/1108065/ which consist of 6.12.33-1 with the revert patch applied on top?

Quoted 5 lines
Quoted 3 lines
Quoted 2 lines

I have put a sha256sum file and signed it with my key in the Debian keyring for verification.

Do I need all those packages?

Just the linux-image-6.12+unreleased-amd64-unsigned package to test the patched kernel image and modules.

I installed the package, and this is as far as I got.
<https://share.bemyeyes.com/chat/oJcrv3N22q>
for anyone who doesn't know, the above link is from Be My Eyes, an app that allows me to read information not available with a screen reader like Orca. I'm blind, and unable to read the Grub menu independently.
I ran a bash script to extract the menu number for that kernel, then ran grub-reboot to try and boot it on the next reboot.
As far as I can tell, the system is trying to boot,but fails and returns to Grub. Am I doing something wrong?

Signature · 6 lines
Sincerely,
Jeremy Lincicome W0JRL
JL Applied Technologies:
https://jlappliedtechnologies.com
SkyHubLink System:
https://skyhublink.com
#7 lore raw
Quoted 59 lines · Jeremy Lincicome

Hi,

Quoted 50 lines · Salvatore Bonaccorso

Hi,

Quoted 47 lines · Jeremy Lincicome
Quoted 46 lines · Salvatore Bonaccorso
Quoted 32 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is athttps://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings  bell for you?

Quoted 7 lines

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Thanks.

Jeremy, could you test the (unofficial!) packages at
https://people.debian.org/~carnil/tmp/linux/1108065/ which consist of 6.12.33-1 with the revert patch applied on top?

Quoted 5 lines
Quoted 3 lines
Quoted 2 lines

I have put a sha256sum file and signed it with my key in the Debian keyring for verification.

Do I need all those packages?

Just the linux-image-6.12+unreleased-amd64-unsigned package to test the patched kernel image and modules.

Quoted 6 lines

I installed the package, and this is as far as I got.
<https://share.bemyeyes.com/chat/oJcrv3N22q>
for anyone who doesn't know, the above link is from Be My Eyes, an app that allows me to read information not available with a screen reader like Orca. I'm blind, and unable to read the Grub menu independently.
I ran a bash script to extract the menu number for that kernel, then ran grub-reboot to try and boot it on the next reboot.
As far as I can tell, the system is trying to boot,but fails and returns to Grub. Am I doing something wrong?

For those of you who got my last message twice, I apologize. Some of the lists rejected it for having html.

Signature · 6 lines
Sincerely,
Jeremy Lincicome W0JRL
JL Applied Technologies:
https://jlappliedtechnologies.com
SkyHubLink System:
https://skyhublink.com
#8 lore raw
In reply to Shawn Lin
Quoted 33 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings  bell for you?

Quoted 6 lines

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Given the number of other reports, probably best to revert anyway.

Quoted 17 lines
Quoted 16 lines
Quoted 5 lines

#regzbot introduced v6.12.30..v6.12.32
#regzbot link: https://bugs.debian.org/1107979
#regzbot link: https://bbs.archlinux.org/viewtopic.php?id=306024

*sigh* apologies for the "mess", the actual right report is
https://bugs.debian.org/1108065 (where #1107979 at least has similarities or might have the same root cause).

#regzbot link: https://bugs.debian.org/1108065

Regards,
Salvatore

#9 lore raw

Hi,

Quoted 38 lines · Adrian Hunter
Quoted 37 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings  bell for you?

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Quoted 5 lines
Quoted 2 lines

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Given the number of other reports, probably best to revert anyway.

FTR, Jeremy Lincicome confirmed that reverting the commit fixes the issue for him as reported in Debian bug #1108065.

Regards,
Salvatore

#10 lore raw
Quoted 40 lines · Salvatore Bonaccorso

Hi,

Quoted 37 lines · Adrian Hunter
Quoted 36 lines · Shawn Lin

+ Jonathan Liu

Quoted 24 lines · Salvatore Bonaccorso
Quoted 23 lines · Salvatore Bonaccorso

Hi

In Debian we got a regression report booting on a Lenovo IdeaPad 1 15ADA7 dropping finally into the initramfs shell after updating from 6.12.30 to 6.12.32 with messages before dropping into the intiramfs shell:

mmc1: mmc_select_hs400 failed, error -110
mmc1: error -110 whilst initialising MMC card

The original report is at https://bugs.debian.org/1107979 and the reporter tested as well kernel up to 6.15.3 which still fails to boot.

Another similar report landed with after the same version update as
https://bugs.debian.org/1107979 .

I only see three commits touching drivers/mmc between 6.12.30..6.12.32:

28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters") 38828e0dc771 ("mmc: dw_mmc: add exynos7870 DW MMC support") 67bb2175095e ("mmc: host: Wait for Vdd to settle on card power off")

Quoted 5 lines
Quoted 5 lines

I have found a potential similar issue reported in ArchLinux at
https://bbs.archlinux.org/viewtopic.php?id=306024

I have asked if we can get more information out of the boot, but maybe this regression report already rings  bell for you?

Jonathan reported a similar failure regarding to hs400 on RK3399 platform.
https://lkml.org/lkml/2025/6/19/145

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Maybe you could try to revert :
28306c58daf8 ("mmc: sdhci: Disable SD card clock before changing parameters")

Given the number of other reports, probably best to revert anyway.

FTR, Jeremy Lincicome confirmed that reverting the commit fixes the issue for him as reported in Debian bug #1108065.

I confirm that reverting the commit fixes

Debian bug #1108065.