Skip to contentSkip to conversation

u-boot-riscv/master

GIT PULL Leo Liang 2 participants 3 messages Aug 14, 2025

lore
Share & tools
lore

Leo Liang

author
#0 lore raw

Hi Tom,

The following changes since commit 869217ee2907595919261b6d4ae81fd76a8ddd81:

Merge tag 'qcom-fixes-13Aug2025' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon (2025-08-13 08:57:49 -0600)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

for you to fetch changes up to 35d6caad6de93b3a5545df7bcdc6d322a4edb93c:

arch/riscv/lib: update memmove and memcpy for big-endian (2025-08-14 15:33:00 +0800)

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/27379
----------------------------------------------------------------
- Board: mbv: Prepare MBV for CI
- Board: MPFS Icicle Kit cleanup
- Board: Add Andes Voyager board support
- RISCV: Update SYS_BOOTM_LEN to commonly used value
- starfive: fix return code of mac write_eeprom
- arch/riscv/lib: update memmove and memcpy for big-endian
----------------------------------------------------------------
Ben Dooks (1):
arch/riscv/lib: update memmove and memcpy for big-endian

Heinrich Schuchardt (1):
starfive: fix return code of mac write_eeprom

Jamie Gibbons (6):
configs: microchip_mpfs_icicle: enable CONFIG_OF_BOARD_SETUP
board: microchip: mpfs_icicle: make use of ft_board_setup()
mailbox: add PolarFire SoC mailbox driver
misc: add PolarFire SoC system controller
board: microchip: mpfs_icicle: enable new driver configs
board: microchip: mpfs_icicle: update to use system controller

Leo Yu-Chi Liang (7):
common: spl: fix compilation warning
riscv: board: Add Andes Voyager board Kconfig support
riscv: dts: andes: Add Voyager device tree
board: andestech: Add Voyager board support
configs: andes: add Voyager board defconfig
doc: board: voyager: Add documentation for Voyager
board: MAINTAINERS: Add Voyager board maintainer

Martin Herren (4):
riscv: Set SYS_BOOTM_LEN explicitly to 0x800000
riscv: Set SYS_BOOTM_LEN default to 0x4000000
riscv: Remove default SYS_BOOTM_LEN from defconfig
riscv: Increase Microchip Icicle's SYS_BOOTM_LEN

Michal Simek (5):
riscv: cpu: Use CONFIG_IS_ENABLED(CPU) instead of plain ifdef
xilinx: mbv: Disable OF_HAS_PRIOR_STAGE
xilinx: mbv: Add missing mmu-type cpu property
xilinx: mbv: Fix dt properties in interrupt controller node
xilinx: mbv: Use separate DTB for binman nodes

 arch/riscv/Kconfig                                 |   4 +
 arch/riscv/cpu/cpu.c                               |  14 +-
 arch/riscv/dts/Makefile                            |   2 +
 arch/riscv/dts/qilai-voyager.dts                   | 227 +++++++++++++++++++++
 arch/riscv/dts/voyager-u-boot.dtsi                 |  52 +++++
 arch/riscv/dts/xilinx-binman.dts                   |  12 ++
 arch/riscv/dts/xilinx-mbv32.dts                    |   8 +-
 arch/riscv/dts/xilinx-mbv64.dts                    |   8 +-
 arch/riscv/lib/memcpy.S                            |  12 +-
 arch/riscv/lib/memmove.S                           |  12 +-
 board/andestech/voyager/Kconfig                    |  44 ++++
 board/andestech/voyager/MAINTAINERS                |   8 +
 board/andestech/voyager/Makefile                   |   6 +
 board/andestech/voyager/voyager.c                  |  70 +++++++
 board/microchip/mpfs_icicle/Kconfig                |   4 +
 board/microchip/mpfs_icicle/mpfs_icicle.c          | 121 ++++++-----
 .../starfive/visionfive2/visionfive2-i2c-eeprom.c  |   8 +-
 board/xilinx/mbv/Kconfig                           |   1 -
 boot/Kconfig                                       |   2 +-
 common/spl/spl.c                                   |   4 +-
 configs/ae350_rv32_defconfig                       |   1 -
 configs/ae350_rv32_falcon_defconfig                |   1 -
 configs/ae350_rv32_falcon_xip_defconfig            |   1 -
 configs/ae350_rv32_spl_defconfig                   |   1 -
 configs/ae350_rv32_spl_xip_defconfig               |   1 -
 configs/ae350_rv32_xip_defconfig                   |   1 -
 configs/ae350_rv64_defconfig                       |   1 -
 configs/ae350_rv64_falcon_defconfig                |   1 -
 configs/ae350_rv64_falcon_xip_defconfig            |   1 -
 configs/ae350_rv64_spl_defconfig                   |   1 -
 configs/ae350_rv64_spl_xip_defconfig               |   1 -
 configs/ae350_rv64_xip_defconfig                   |   1 -
 configs/ibex-ast2700_defconfig                     |   1 -
 configs/k230_canmv_defconfig                       |   1 +
 configs/microchip_mpfs_icicle_defconfig            |   3 +
 configs/milkv_duo_defconfig                        |   1 -
 configs/qemu-riscv32_defconfig                     |   1 -
 configs/qemu-riscv32_smode_defconfig               |   1 -
 configs/qemu-riscv32_spl_defconfig                 |   1 -
 configs/qemu-riscv64_defconfig                     |   1 -
 configs/qemu-riscv64_smode_defconfig               |   1 -
 configs/qemu-riscv64_spl_defconfig                 |   1 -
 configs/sifive_unleashed_defconfig                 |   1 -
 configs/sifive_unmatched_defconfig                 |   1 -
 configs/sipeed_licheerv_nano_defconfig             |   1 -
 configs/sipeed_maix_bitm_defconfig                 |   1 +
 configs/sipeed_maix_smode_defconfig                |   1 +
 configs/starfive_visionfive2_defconfig             |   1 -
 configs/th1520_lpi4a_defconfig                     |   1 -
 configs/voyager_spl_defconfig                      |  65 ++++++
 configs/xilinx_mbv32_defconfig                     |   2 +
 configs/xilinx_mbv32_smode_defconfig               |   2 +
 configs/xilinx_mbv64_defconfig                     |   2 +
 configs/xilinx_mbv64_smode_defconfig               |   2 +
 doc/board/andestech/index.rst                      |   1 +
 doc/board/andestech/voyager.rst                    |  81 ++++++++
 drivers/mailbox/Kconfig                            |   7 +
 drivers/mailbox/Makefile                           |   1 +
 drivers/mailbox/mpfs-mbox.c                        | 177 ++++++++++++++++
 drivers/misc/Kconfig                               |   9 +
 drivers/misc/Makefile                              |   1 +
 drivers/misc/mpfs_syscontroller.c                  | 156 ++++++++++++++
 include/configs/voyager.h                          |  40 ++++
 include/mpfs-mailbox.h                             |  66 ++++++
 64 files changed, 1146 insertions(+), 116 deletions(-)
 create mode 100644 arch/riscv/dts/qilai-voyager.dts
 create mode 100644 arch/riscv/dts/voyager-u-boot.dtsi
 create mode 100644 arch/riscv/dts/xilinx-binman.dts
 create mode 100644 board/andestech/voyager/Kconfig
 create mode 100644 board/andestech/voyager/MAINTAINERS
 create mode 100644 board/andestech/voyager/Makefile
 create mode 100644 board/andestech/voyager/voyager.c
 create mode 100644 configs/voyager_spl_defconfig
 create mode 100644 doc/board/andestech/voyager.rst
 create mode 100644 drivers/mailbox/mpfs-mbox.c
 create mode 100644 drivers/misc/mpfs_syscontroller.c
 create mode 100644 include/configs/voyager.h
 create mode 100644 include/mpfs-mailbox.h

Best regards,
Leo

#1 lore raw
Quoted 14 lines · Leo Liang

Hi Tom,

The following changes since commit 869217ee2907595919261b6d4ae81fd76a8ddd81:

Merge tag 'qcom-fixes-13Aug2025' of https://source.denx.de/u-boot/custodians/u-boot-snapdragon (2025-08-13 08:57:49 -0600)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-riscv.git

for you to fetch changes up to 35d6caad6de93b3a5545df7bcdc6d322a4edb93c:

arch/riscv/lib: update memmove and memcpy for big-endian (2025-08-14 15:33:00 +0800)

Quoted 9 lines

CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/27379
----------------------------------------------------------------
- Board: mbv: Prepare MBV for CI
- Board: MPFS Icicle Kit cleanup
- Board: Add Andes Voyager board support
- RISCV: Update SYS_BOOTM_LEN to commonly used value
- starfive: fix return code of mac write_eeprom
- arch/riscv/lib: update memmove and memcpy for big-endian
----------------------------------------------------------------

Ugh. Does RISC-V still have some reason that fdt_high / initrd_high need to be set to disable relocation? I thought that had been fixed already...

Signature · 1 line
Tom