Skip to contentSkip to conversation

DISCUSSION Søren Lott 2 participants 2 messages Mar 25, 2005

lore
Share & tools
lore
#0 lore raw

in the SATA kconfig menu, the help message from
Intel PIIX/ICH SATA support says:

CONFIG_SCSI_ATA_PIIX:

This option enables support for ICH5 Serial ATA.
If PATA support was enabled previously, this enables support for select Intel PIIX/ICH PATA host controllers.

anyone care to clarify if this mean that having enabled:

CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

i can use the PATA ports on a ICH5 controller through libata ? if not, which is exactly the meaning of "If PATA support was enabled previously" on this message ?

thanks.

-SL.

#1 lore raw
Quoted 8 lines · Søren Lott

in the SATA kconfig menu, the help message from Intel PIIX/ICH SATA support says:

CONFIG_SCSI_ATA_PIIX:

This option enables support for ICH5 Serial ATA.
If PATA support was enabled previously, this enables support for select Intel PIIX/ICH PATA host controllers.

Quoted 8 lines

anyone care to clarify if this mean that having enabled:

CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

i can use the PATA ports on a ICH5 controller through libata ? if not, which is exactly the meaning of "If PATA support was enabled previously" on this message ?

I agree it is quite confusing wording. Probably should remove all reference to PATA in the CONFIG_SCSI_ATA_PIIX Kconfig entry.

The comment is referring to the somewhat-hidden fact that if you define ATA_ENABLE_PATA in include/linux/libata.h, then libata will support your Intel PIIX PATA controllers, in addition to the Intel PIIX SATA controllers.

However, since ATAPI support isn't yet stable, this is of limited usefulness.

Jeff