Request for guidence
hello,
I hope everyone is doing well and fine. Recently i have been getting prepared for gsoc 2026 for The Linux Foundation project idea iio AD39113 driver development however i just noticed that the project idea has been withdrawn from the list. I wanted to ask that whether the driver develpment is still planned or it is dropped from project idea list.
If the driver is still needed , I would be interested in contribtuting to its development outside gsoc as well since i have no idea whether i would be allowed for its development or not thats is why any help would be appreciated thank you for your time .
Hello ShiHao,
Quoted 8 lines · ShiHao
hello,
I hope everyone is doing well and fine. Recently i have been getting prepared for gsoc 2026 for The Linux Foundation project idea iio AD39113 driver development however i just noticed that the project idea has been withdrawn from the list. I wanted to ask that whether the driver develpment is still planned or it is dropped from project idea list.
Glad to know about your interest in the IIO driver GSoC project. There will be no IIO driver GSoC project this year. I suggest the Device Tree Bindings project as an alternative.
https://github.com/LinuxFoundationGSoC/ProjectIdeas/wiki/GSoC-2026-Device-Tree-Bindings
Quoted 6 lines
If the driver is still needed , I would be interested in contribtuting to its development outside gsoc as well since i have no idea whether i would be allowed for its development or not thats is why any help would be appreciated thank you for your time .
If you're anyway interested in contributing to IIO, there are links to IIO-related material in the non-active IIO project page
https://github.com/LinuxFoundationGSoC/ProjectIdeas/wiki/GSoC-2026-IIO-Driver
I am unable to send any hardware anywhere, though.
With best regards,
Marcelo
Quoted 10 lines · Marcelo Schmitt
Glad to know about your interest in the IIO driver GSoC project. There will be no IIO driver GSoC project this year. I suggest the Device Tree Bindings project as an alternative.
If you're anyway interested in contributing to IIO, there are links to IIO-related material in the non-active IIO project page
I am unable to send any hardware anywhere, though.With best regards,
Marcelo
hello, Marcelo Schmitt
Thank you for your kind response . I will surely checkout if there is any sensor that requires driver because anyway i will make one driver and i thought it would be good if i could up-stream it but for now i am preparing for device tree project idea from Linux foundation because it aligns with my driver development goals therefore if there is any suggestions or any help i would appreciate it deeply. Thank you all for you time.
Sincerely
shi Hao
Hi,
unfortunately, the IIO group is not mentoring in this year's GSoC. If you want to do GSoC this year, I recommend you to apply for the Device Tree Bindings projects
If you want to contribute to IIO Driver outside GSoC, please join their mailing list as indicated on the project idea page and introduce yourself there.
Till
Quoted 13 lines · ShiHao
hello,
I hope everyone is doing well and fine. Recently i have been getting prepared for gsoc 2026 for The Linux Foundation project idea iio AD39113 driver development however i just noticed that the project idea has been withdrawn from the list. I wanted to ask that whether the driver develpment is still planned or it is dropped from project idea list.
If the driver is still needed , I would be interested in contribtuting to its development outside gsoc as well since i have no idea whether i would be allowed for its development or not thats is why any help would be appreciated thank you for your time .
Quoted 8 lines · Till Kamppeter
unfortunately, the IIO group is not mentoring in this year's GSoC. If you want to do GSoC this year, I recommend you to apply for the Device Tree Bindings projects
If you want to contribute to IIO Driver outside GSoC, please join their mailing list as indicated on the project idea page and introduce yourself there.
We are already in the relevant mailing list, so if ShiHao wants to work on IIO drivers, welcome!
Quoted 13 lines · ShiHao
Quoted 12 lines
I hope everyone is doing well and fine. Recently i have been getting prepared for gsoc 2026 for The Linux Foundation project idea iio AD39113 driver development however i just noticed that the project idea has been withdrawn from the list. I wanted to ask that whether the driver develpment is still planned or it is dropped from project idea list.
If the driver is still needed , I would be interested in contribtuting to its development outside gsoc as well since i have no idea whether i would be allowed for its development or not thats is why any help would be appreciated thank you for your time .
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: Request for guidance
Quoted 2 lines
We are already in the relevant mailing list, so if ShiHao wants to work on IIO drivers, welcome!
hello,Andy Shevchenko
My name is FeihuaCheng, and I am a graduate student in Control Engineering. I have been studying embedded Linux and Linux driver development. I saw the discussion about the AD39113 IIO driver and I am also very interested in contributing to its development.
Would it be possible for me to participate in this work as well? If so, I am available to start now and would appreciate any advice or guidance on how to get started.
Best Regards,
FeihuaCheng
Re: Request for guidance
+Cc: IIO stakeholders
Quoted 13 lines · ChenLei
Quoted 2 lines
We are already in the relevant mailing list, so if ShiHao wants to work on IIO drivers, welcome!
hello,Andy Shevchenko
My name is FeihuaCheng, and I am a graduate student in Control Engineering. I have been studying embedded Linux and Linux driver development. I saw the discussion about the AD39113 IIO driver and I am also very interested in contributing to its development.
Would it be possible for me to participate in this work as well? If so, I am available to start now and would appreciate any advice or guidance on how to get started.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 7 lines · Andy Shevchenko
We are already in the relevant mailing list, so if ShiHao wants to work on IIO drivers, welcome!
With Best Regards,
Andy Shevchenko
Hello,
First of all, thank you all for your time and responses. After learning that the IIO driver development project will not be part of this year’s GSoC, I shifted my preparation toward the DT binding project idea since it aligns with my driver development goals and Thank you, Andy, for letting me know that I can still work on driver development. However, I still have no clear idea how to get started.
My main questions are: how should I begin, which sensors currently need drivers, and what happens if someone else is already working on a particular driver? Would it still be possible for me to contribute?
Therefore, I would really appreciate some guidance on how to get started. Any help would be greatly appreciated. Thank you all again.
With sincere regards,
Shi Hao
Jonathan Cameron
maintainerQuoted 17 lines · On Wed, 11 Mar 2026 10:43:19 +0530 ShiHao <[email protected]> wrote:
Quoted 7 lines · Andy Shevchenko
We are already in the relevant mailing list, so if ShiHao wants to work on IIO drivers, welcome!
With Best Regards,
Andy ShevchenkoHello,
First of all, thank you all for your time and responses. After learning that the IIO driver development project will not be part of this year’s GSoC, I shifted my preparation toward the DT binding project idea since it aligns with my driver development goals and Thank you, Andy, for letting me know that I can still work on driver development. However, I still have no clear idea how to get started.
Quoted 4 lines
My main questions are: how should I begin, which sensors currently need drivers, and what happens if someone else is already working on a particular driver? Would it still be possible for me to contribute?
For devices that need drivers, best bet is normally to see if a commonly available part with a break out board (to avoid having to design and build circuit boards!) is not yet supported. Works best when it's something you are interested in.
Other alternatives that can be good places to learn are around modernising or debugging existing drivers. Either get the hardware if possible, or another useful skill to learn is how to emulate that hardware. Personally I tend to do that on QEMU but that's because I'm more familiar with that than other alternatives.
Other than mechanical changes where we can easily see there is no functional affect I wouldn't advise trying to work on drivers unless you have good emulation to test against. Doing emulation for a device that isn't currently supported is also unwise because it's hard to know if it is right without getting that thoroughly reviewed. As such it tends to be most helpful when you can assume the existing code works, test the emulation using that and then test your refactors and updates.
Jonathan
Quoted 8 lines
Therefore, I would really appreciate some guidance on how to get started. Any help would be greatly appreciated. Thank you all again.
With sincere regards,
Shi Hao