Printk output on console
Hi Selva,
I understood the question as where all/what all printks (with line nos and the file names)
you are looking for is it. I think, in a normal printf using the macros __FILE__ and __LINE__ will give that...
ex:
printk(KERN_ERR "%s: Driver Initialisation failed", __FILE__); Is this helpful...
Regards,
srinivas.
Hi srinivas,
My question is "We are having lot more printk
statements in the kernel source files. While the kernel is in execution where the output of all these statements will go? and can we redirect the output of printk to our console?
Please help me. Also I have one more error after
having compiled my new kernel 2.6.9. After booting it shows the following error
"Kernel panic syncing unable to mount block(0,0) VFS specify root =LABEL correctly"
Do u know how to deal with it?
Thanks,
selva
--- srinivas naga vutukuri
Quoted 14 lines · <[email protected]> wrote:
Hi Selva,
I understood the question as where all/what all
printks (with
line nos and the file names)
you are looking for is it. I think, in a normal
printf using the
macros__FILE__and__LINE__will give that...ex:
printk(KERN_ERR "%s: Driver Initialisation failed",__FILE__);
Is this helpful...
Quoted 10 lines
Regards,
srinivas.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
Hi Selva,
You can go through, one of the help link on the log msgs...
http://www.hk8.org/old_web/linux/run/ch08_03.htm
I think, they(kernel printk's) are directing to the console only... Or you can observe, initially while booting it up, after console initiation happened, it starts buffering out all the printk's output to the console only.
But i did't remember, the code flow, at a particular point, the X or something
the shell will take over of it...But any emergency msgs, from the kernel, will be
coming onto the Console only...
I think, for your error msg, you can better google it...Its not able to recognise,
the boot partition may be...
Regards,
srinivas.
----- Original Message -----
From: "selvakumar nagendran" <[email protected]>
To: "srinivas naga vutukuri" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, December 21, 2004 3:13 PM
Subject: Re: Printk output on console
Quoted 51 lines
Hi srinivas,
My question is "We are having lot more printk
statements in the kernel source files. While the kernel is in execution where the output of all these statements will go? and can we redirect the output of printk to our console?
Please help me. Also I have one more error after
having compiled my new kernel 2.6.9. After booting it shows the following error"Kernel panic syncing unable to mount
block(0,0)VFS specify root =LABEL correctly"
Do u know how to deal with it?Thanks,
selva
--- srinivas naga vutukuriQuoted 14 lines · <[email protected]> wrote:
Hi Selva,
I understood the question as where all/what all
printks (with
line nos and the file names)
you are looking for is it. I think, in a normal
printf using the
macros__FILE__and__LINE__will give that...ex:
printk(KERN_ERR "%s: Driver Initialisation failed",__FILE__);
Is this helpful...Quoted 10 lines
Regards,
srinivas.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Selvakumar,
| While the |> kernel is in execution where the output of all these |> statements will go?
printk messages go to /proc/kmsg. You can read them using cat (e.g. cat /proc/kmsg)
| can we redirect the output of
|> printk to our console?
There is another way to display kernel messages on a console: managing ttys. Here is some code (taken from Peter Salzman's "The Linux Kernel Module Programming Guide"):
static void print_string(char *str)
{
struct tty_struct *tty;#if ( LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,5) ) tty = current->tty; #else tty = current->signal->tty;
#endif
if (!tty) return; ((my_tty->driver)->write) (my_tty, 0, str, strlen(str)); ((my_tty->driver)->write) (my_tty, 0, "\015\012", 2);
}
Regards,
Luca
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iQEVAwUBQcqmKxZrwl7j21nOAQKKegf/ZvQxx4FlaObzfeRQYXr5rRyK3/CSwaMX 3vFxX4fGm1Bn0PkTM1NgmgGnDdWaRFyME4odSy6k5XjnyPwO1DqkDUqJarexaq2V 8wrFhQMe3duEhgxonhOSVn/n+/ZIkqxkLujgk5YNpI8jE2vgzw9SwgGb5ck4wEz3 KbqF7YDRPnPot2rud3RTVVzc1MOb0Ti0zDRMpmvyOxkjOL1eocYKJfo5ZalNBQZi k6B7Akk4zWZ6iFjl2Ojxw4RrZVoUupPb2qbkGWp11ghStTur1Qpw5WJyQ25zQB40 8r8ERFfzE02dbE/jiUj5SucJ8DVIKY38KXcMTS64+vWtH9263GkuxQ== =1DIB
-----END PGP SIGNATURE-----