Slow tape drive timeout
Quoted 10 lines · Kai Makisara
Quoted 5 lines · Robert Hancock
Why is accessing the tape drive with no tape in it causing a timeout in the first place? I should think that would fail immediately with some "medium not present" error from the drive. Unless the drive has no mechanism to detect it, but that seems really retarded..
It does not seem retarded to me. If a program wants to just wait until the tape drive becomes ready (e.g., loads the tape), it can use the blocking open. This is simple.
This would be simple, if there were no timeout. Having the timeout, the program must loop anyway.
Quoted 5 lines
If a program wants to test the status, it uses
non-blocking open. The behavior mandated by the standards provides alternatives. IfO_NONBLOCKis not supported, the user program must implement the waiting logic if the program just wants to wait until the drive is ready before starting i/o.
Therfore a portable program SHOULD implement a waiting logic that won't burn the CPU if there is no tape in the drive.
It's still sane to allow waiting for media change, but this applies to any removable media.