Skip to contentSkip to conversation

100.0% power usage of Device Audio codec (HDA) on wake

DISCUSSION Tomas Pospisek 3 participants 15 messages Nov 16, 2012 – Nov 21, 2012

lore
Share & tools
lore
#0 lore raw

Hello,

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

The bug tracking can be found here:

    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

is there anything known about this problem? What the root of the problem is? How to solve it? Are there patches? Are there kernels that have fixed the problem? Are there workarounds?

The problem seems to be impacting quite a few users. *t

#1 lore raw

At Fri, 16 Nov 2012 15:23:06 +0100,

Quoted 7 lines · Tomas Pospisek

Hello,

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

What do you mean "wakeup"? Which kernel are you using? Which codec and HD-audio controller chips? Please elaborate a bit more instead of a bug track URL. This will save lots of time for other people.

If it's really a CPU usage, try to run perf and check what is spinning around.

thanks,

Takashi

Quoted 16 lines

The bug tracking can be found here:

    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

is there anything known about this problem? What the root of the problem is? How to solve it? Are there patches? Are there kernels that have fixed the problem? Are there workarounds?

The problem seems to be impacting quite a few users. *t
_______________________________________________
Alsa-devel mailing list [email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#2 lore raw

Hello,

Quoted 8 lines · Takashi Iwai
Quoted 5 lines · Tomas Pospisek

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

What do you mean "wakeup"?

Waking up from suspend to RAM.

Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:
http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64

Quoted 1 line

Which codec and HD-audio controller chips?

Wrt codec - I don't know. Before suspending I am not playing any sound. And the
system (say the desktop system or the bell in a terminal) isn't producing any sound either.

Powertop says "Audio codec hwC0D0: IDT". Other People in the launchpad bugtracker seem to be reporting either "hwC0D0: IDT", "hwC0D0: Conexant" or "hwC0D1: Conexant".

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

Here's the chip:

Audio:
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)

Quoted 1 line

Please elaborate a bit more instead of a bug track URL. This will save

lots of time for other people.

Powertop v2.0 shows:
in the Overview tab:

                Usage       Events/s    Category       Description
            100.0%                      Device         Audio codec hwC0D0:

IDT

in Tunable tab:
Good Runtime PM for PCI Device Intel Corporation 6 Series/C200
Series Chipset Family High Definition Audio Controller

Top shows:
top - 01:12:28 up 4 days, 4:10, 3 users, load average: 0.04, 0.14, 0.21
Tasks: 181 total, 2 running, 179 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.2 us, 0.3 sy, 0.0 ni, 99.5 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st

KiB Mem:   4007896 total,  3773420 used,   234476 free,   266220 buffers
KiB Swap:  8280060 total,      272 used,  8279788 free,  2096072 cached

If I start alsamixer and press "F5" (nothing else!), the previous number in powertop will go down to:

Usage Events/s Category Description
0.0% Audio codec hwC0D0: IDT

after about 5 seconds.

I have tried also tried the following workaround:

echo 1 | sudo tee /sys/module/snd_hda_intel/parameters/power_save echo Y | sudo tee
/sys/module/snd_hda_intel/parameters/power_save_controller

mentioned in Ubuntu's Launchpad:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/37

but that had no visible impact.

The bug is a regression, since I did not have the problem under the previous Ubuntu
Precise installation. However I *think* I was running a non-standard kernel there (my HD crashed, so I can't verify this assertion).

Quoted 2 lines

If it's really a CPU usage, try to run perf and check what is spinning around.

I ran "perf top", but I can't find anything interesting there:

Events: 8K cycles

 15.69%  libxul.so                      [.] 0x9c31ae
 12.49%  libmozjs.so.10d                [.] 0xd4f72
  7.38%  [kernel]                       [k] intel_idle
  3.15%  powertop                       [.] 0x283ae
  2.40%  Xorg (deleted)                 [.] 0xc3894
  2.26%  libc-2.13.so                   [.] 0x786ea
  1.41%  libQtCore.so.4.8.2             [.] 0xbc8fb

...

Thanks,
*t

Quoted 15 lines
Quoted 15 lines

The bug tracking can be found here:

    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

is there anything known about this problem? What the root of the problem is? How to solve it? Are there patches? Are there kernels that have fixed the problem? Are there workarounds?

The problem seems to be impacting quite a few users. *t
_______________________________________________
Alsa-devel mailing list [email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw
Quoted 3 lines · Tomas Pospisek
Quoted 1 line · Takashi Iwai

Which codec and HD-audio controller chips?

[...]

Quoted 3 lines

Powertop says "Audio codec hwC0D0: IDT". Other People in the launchpad bugtracker seem to be reporting either "hwC0D0: IDT", "hwC0D0: Conexant"

or

Quoted 9 lines

"hwC0D1: Conexant".

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

Here's the chip:

Audio:
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)

People in this other bug thread seem to have other "codecs" and setups as well:

1. k: Ubuntu linux-image-3.0.0-12-generic 3.0.0-12.20
d: ?
c: ?
u: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

2. k: ?
d: ?
c: hwC0D1: LSI, hwC0D0: Analog Devices
u:
https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631/comments/3

3. k: ?
d: ?
c: hwC0D1: LSI
u:
https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631/comments/4

4. k:
d:
c: hwC0D1: LSI
u:
https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631/comments/5

5. k: ?
d: ?
c: hwC0D3: auto (Intel)
u:
https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631/comments/6

6. k: ?
d: ?
c: hwC0D0: SigmaTel
u:
https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631/comments/7

7. k: linux-image-3.0.0-12-generic 3.0.0-12.20, 3.1.0-*
d: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
c: hwC0D0: Conexant
u: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

8. k: ?
d: ?
c: hwC0D0: IDT
u:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/34

9. k: 3.2.0-26-generic #41-Ubuntu
d: Device: 6 Series/C200 Series Chipset Family High Definition Audio
Controller [1c20]
c: ?
u:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/43

10. k: ?
d: PCI Device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller,
PCI Device: Advanced Micro Devices [AMD] nee ATI RV635 HDMI Audio
[Radeon HD 3600 Series]

    c: ?
    u:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/44

11. k: linux-image-3.2.0-4-amd64
d: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series
Chipset Family High Definition Audio Controller (rev 05)
c: Audio codec hwC0D0: IDT
u:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/45

#4 lore raw
In reply to Tomas Pospisek

At Sat, 17 Nov 2012 01:48:47 +0100,

Quoted 6 lines · Tomas Pospisek

Hello,

Quoted 2 lines · Takashi Iwai
Quoted 1 line · Tomas Pospisek
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

What do you mean "wakeup"?

Waking up from suspend to RAM.

And does the same issue occur on hibernation, too? Basically both S2RAM and S2DISK use the same suspend/resume path regarding the sound driver, so the behavior should be consistent in both cases.

Quoted 4 lines
Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:
http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64

OK, could you check the latest Linus tree (at least 3.7-rc5) whether the problem is still present? If it is, please keep using it for the further testing instead of 3.2.0. 3.2.0 is way too old to debug primarily.

Also, try the latest alsa-lib from git tree, too. I thought David provides some packages built from the latest repo?

Quoted 3 lines
Quoted 1 line

Which codec and HD-audio controller chips?

Wrt codec - I don't know. Before suspending I am not playing any sound.

Well, I meant the audio codec chip, not the codec format :) But in the text below, you showed a conexant codec.

Also, it's important to know what h/w vendor and model are. I guess it's a Lenovo machine?

Quoted 3 lines

And the
system (say the desktop system or the bell in a terminal) isn't producing any sound either.

OK.

Quoted 12 lines

Powertop says "Audio codec hwC0D0: IDT". Other People in the launchpad bugtracker seem to be reporting either "hwC0D0: IDT", "hwC0D0: Conexant" or "hwC0D1: Conexant".

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

Here's the chip:

Audio:
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)

Quoted 8 lines
Quoted 1 line

Please elaborate a bit more instead of a bug track URL. This will save

lots of time for other people.

Powertop v2.0 shows:
in the Overview tab:

                Usage       Events/s    Category       Description
            100.0%                      Device         Audio codec hwC0D0:

IDT

The usage in powertop doesn't mean what actually consuming the power in 100%. It's a completely different statistics from the CPU usage.

It shows that the sound driver hasn't gone into the power-saving mode, a sort of partial suspend of the device. It can happen by various reasons: e.g. when your system doesn't set up the power_save option properly, or your mixer setup blocks it.

First off, check the value in /sys/module/snd_hda_intel/parameters/power_save. If it shows 0, it means the power-saving feature is turned off. If it's a positive value, it means the power-saving may be turned on after the specified seconds after closing all usages of sound devices.

Then check "fuser /dev/snd/pcm*" (run as root). If this shows something, the PCM device is still being used, so the power-saving can't be activated.

If nothing is using the PCM device, but still no power-saving is activated, check the mixer setup. Check "amixer -c0 contents", and see whether any element with "Playback Switch" string is turned on. If anything else than "Speaker", "Headphone", "Master" (or sometimes "Front" or "Surround", too) is turned on, this is likely an analog loopback control, which constantly blocks the power-saving feature. Turn them off.

If nothing still helps, give alsa-info.sh output at this state.

Quoted 12 lines

in Tunable tab:
Good Runtime PM for PCI Device Intel Corporation 6 Series/C200
Series Chipset Family High Definition Audio Controller

Top shows:
top - 01:12:28 up 4 days, 4:10, 3 users, load average: 0.04, 0.14, 0.21
Tasks: 181 total, 2 running, 179 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.2 us, 0.3 sy, 0.0 ni, 99.5 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st

KiB Mem:   4007896 total,  3773420 used,   234476 free,   266220 buffers
KiB Swap:  8280060 total,      272 used,  8279788 free,  2096072 cached
Quoted 7 lines

If I start alsamixer and press "F5" (nothing else!), the previous number in powertop will go down to:

Usage Events/s Category Description
0.0% Audio codec hwC0D0: IDT

after about 5 seconds.

Again, this doesn't mean that your machine is consuming too much power. But please check the behavior at first with the latest 3.7-rc5 kernel.

Quoted 11 lines

I have tried also tried the following workaround:

echo 1 | sudo tee /sys/module/snd_hda_intel/parameters/power_save echo Y | sudo tee
/sys/module/snd_hda_intel/parameters/power_save_controller

mentioned in Ubuntu's Launchpad:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/37

but that had no visible impact.

In the earlier kernel before 3.7, setting the power_save option alone doesn't trigger the power-saving mode. It's activated after the first use of the device. But this was improved in 3.7 kernel so that the power-saving is kicked off immediately.

Takashi

Quoted 40 lines

The bug is a regression, since I did not have the problem under the previous Ubuntu
Precise installation. However I *think* I was running a non-standard kernel there (my HD crashed, so I can't verify this assertion).

Quoted 2 lines

If it's really a CPU usage, try to run perf and check what is spinning around.

I ran "perf top", but I can't find anything interesting there:

Events: 8K cycles

 15.69%  libxul.so                      [.] 0x9c31ae
 12.49%  libmozjs.so.10d                [.] 0xd4f72
  7.38%  [kernel]                       [k] intel_idle
  3.15%  powertop                       [.] 0x283ae
  2.40%  Xorg (deleted)                 [.] 0xc3894
  2.26%  libc-2.13.so                   [.] 0x786ea
  1.41%  libQtCore.so.4.8.2             [.] 0xbc8fb

...

Thanks,
*t

Quoted 15 lines
Quoted 15 lines

The bug tracking can be found here:

    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

is there anything known about this problem? What the root of the problem is? How to solve it? Are there patches? Are there kernels that have fixed the problem? Are there workarounds?

The problem seems to be impacting quite a few users. *t
_______________________________________________
Alsa-devel mailing list [email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw
Quoted 10 lines · Takashi Iwai
Quoted 8 lines · Tomas Pospisek
Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Tomas Pospisek

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

What do you mean "wakeup"?

Waking up from suspend to RAM.

And does the same issue occur on hibernation, too? Basically both S2RAM and S2DISK use the same suspend/resume path regarding the sound driver, so the behavior should be consistent in both cases.

s2disk doesn't work here / isn't configured properly so I can't tell ad hoc.

Quoted 9 lines
Quoted 4 lines
Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:
http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64

OK, could you check the latest Linus tree (at least 3.7-rc5) whether the problem is still present? If it is, please keep using it for the further testing instead of 3.2.0. 3.2.0 is way too old to debug primarily.

I'm running 3.7.0-rc6 now, with configuration from the "original" Debian kernel, make oldconfig and all choices to default.

Quoted 2 lines

Also, try the latest alsa-lib from git tree, too. I thought David provides some packages built from the latest repo?

I've found this repository by David:

https://launchpad.net/~diwic/+archive/dkms

however it seems to be deprecated and points to this:

https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-dailyvvv

which however only contains "dkms-hda" packages. I'm not sure what those packages contain, or rather whether they contain the latest alsa and utils. It seems that they "only" contain an out of tree hda build, but I'm not sure.

I'll try to compile latest alsa "the Debian way" and see if that changes anything.

Quoted 9 lines
Quoted 3 lines
Quoted 1 line

Which codec and HD-audio controller chips?

Wrt codec - I don't know. Before suspending I am not playing any sound.

Well, I meant the audio codec chip, not the codec format :) But in the text below, you showed a conexant codec.

Also, it's important to know what h/w vendor and model are. I guess it's a Lenovo machine?

It's not Conexant. It's:

100.0% Device Audio codec hwC0D0:
IDT
100.0% Device Audio codec hwC0D3:
Intel

Note that with Debian's 3.2.0-4-amd64 kernel only the IDT codec would show up
on the top of powertop's list. Now there's the Intel codec as well.

Quoted 2 lines
Quoted 2 lines

And the
system (say the desktop system or the bell in a terminal) isn't

producing

Quoted 6 lines
Quoted 1 line

any sound either.

OK.

Quoted 2 lines

Powertop says "Audio codec hwC0D0: IDT". Other People in the launchpad bugtracker seem to be reporting either "hwC0D0: IDT", "hwC0D0:

Conexant"

Quoted 29 lines
Quoted 14 lines

or
"hwC0D1: Conexant".

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

Here's the chip:

Audio:
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)

Quoted 2 lines

Please elaborate a bit more instead of a bug track URL. This will save lots of time for other people.

Quoted 6 lines

Powertop v2.0 shows:
in the Overview tab:

                Usage       Events/s    Category       Description
            100.0%                      Device         Audio codec
            hwC0D0:

IDT

The usage in powertop doesn't mean what actually consuming the power in 100%. It's a completely different statistics from the CPU usage.

It shows that the sound driver hasn't gone into the power-saving mode, a sort of partial suspend of the device. It can happen by various reasons: e.g. when your system doesn't set up the power_save option properly, or your mixer setup blocks it.

Quoted 5 lines

First off, check the value in /sys/module/snd_hda_intel/parameters/power_save. If it shows 0, it means the power-saving feature is turned off. If it's a positive value, it means the power-saving may be turned on after the specified seconds after closing all usages of sound devices.

Upon boot the value is 0. I can set it to 1 and it stays 1 while running, however if I suspend to ram and resume, the value gets reset to 0 again.

Quoted 3 lines

Then check "fuser /dev/snd/pcm*" (run as root). If this shows something, the PCM device is still being used, so the power-saving can't be activated.

It doesn't show anything.

Quoted 7 lines

If nothing is using the PCM device, but still no power-saving is activated, check the mixer setup. Check "amixer -c0 contents", and see whether any element with "Playback Switch" string is turned on. If anything else than "Speaker", "Headphone", "Master" (or sometimes "Front" or "Surround", too) is turned on, this is likely an analog loopback control, which constantly blocks the power-saving feature. Turn them off.

Here's all instances of "Playback Switch":

numid=13,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=2,iface=MIXER,name='Front Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=4,iface=MIXER,name='Surround Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=25,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=6,iface=MIXER,name='Beep Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off

Quoted 1 line

If nothing still helps, give alsa-info.sh output at this state.

http://www.alsa-project.org/db/?f=54ea874f43f12c1572aff3ee3113dc4b0ad0b398

Thanks,
*t

Quoted 5 lines
Quoted 5 lines

in Tunable tab:
Good Runtime PM for PCI Device Intel Corporation 6
Series/C200
Series Chipset Family High Definition Audio Controller

Quoted 8 lines
Quoted 8 lines

Top shows:
top - 01:12:28 up 4 days, 4:10, 3 users, load average: 0.04, 0.14, 0.21
Tasks: 181 total, 2 running, 179 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.2 us, 0.3 sy, 0.0 ni, 99.5 id, 0.0 wa, 0.0 hi, 0.0 si,

0.0 st
KiB Mem: 4007896 total, 3773420 used, 234476 free, 266220

buffers

Quoted 3 lines
Quoted 3 lines

KiB Swap: 8280060 total, 272 used, 8279788 free, 2096072 cached

If I start alsamixer and press "F5" (nothing else!), the previous

number

Quoted 20 lines
Quoted 6 lines

in powertop will go down to:

Usage Events/s Category Description
0.0% Audio codec hwC0D0: IDT

after about 5 seconds.

Again, this doesn't mean that your machine is consuming too much power. But please check the behavior at first with the latest 3.7-rc5 kernel.

Quoted 9 lines

I have tried also tried the following workaround:

echo 1 | sudo tee /sys/module/snd_hda_intel/parameters/power_save echo Y | sudo tee
/sys/module/snd_hda_intel/parameters/power_save_controller

mentioned in Ubuntu's Launchpad:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/37

Quoted 17 lines
Quoted 2 lines

but that had no visible impact.

In the earlier kernel before 3.7, setting the power_save option alone doesn't trigger the power-saving mode. It's activated after the first use of the device. But this was improved in 3.7 kernel so that the power-saving is kicked off immediately.

Takashi

Quoted 6 lines

The bug is a regression, since I did not have the problem under the previous Ubuntu
Precise installation. However I *think* I was running a non-standard kernel there (my HD crashed, so I can't verify this assertion).

Quoted 1 line

If it's really a CPU usage, try to run perf and check what is

spinning

Quoted 34 lines
Quoted 34 lines
Quoted 1 line

around.

I ran "perf top", but I can't find anything interesting there:

Events: 8K cycles

 15.69%  libxul.so                      [.] 0x9c31ae
 12.49%  libmozjs.so.10d                [.] 0xd4f72
  7.38%  [kernel]                       [k] intel_idle
  3.15%  powertop                       [.] 0x283ae
  2.40%  Xorg (deleted)                 [.] 0xc3894
  2.26%  libc-2.13.so                   [.] 0x786ea
  1.41%  libQtCore.so.4.8.2             [.] 0xbc8fb

...

Thanks,
*t

Quoted 15 lines
Quoted 15 lines

The bug tracking can be found here:

    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

is there anything known about this problem? What the root of the problem is? How to solve it? Are there patches? Are there kernels that have fixed the problem? Are there workarounds?

The problem seems to be impacting quite a few users. *t
_______________________________________________
Alsa-devel mailing list [email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#6 lore raw

At Tue, 20 Nov 2012 07:54:10 +0100,

Quoted 68 lines · Tomas Pospisek
Quoted 10 lines · Takashi Iwai
Quoted 8 lines · Tomas Pospisek
Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Tomas Pospisek

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

What do you mean "wakeup"?

Waking up from suspend to RAM.

And does the same issue occur on hibernation, too? Basically both S2RAM and S2DISK use the same suspend/resume path regarding the sound driver, so the behavior should be consistent in both cases.

s2disk doesn't work here / isn't configured properly so I can't tell ad hoc.

Quoted 9 lines
Quoted 4 lines
Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:
http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64

OK, could you check the latest Linus tree (at least 3.7-rc5) whether the problem is still present? If it is, please keep using it for the further testing instead of 3.2.0. 3.2.0 is way too old to debug primarily.

I'm running 3.7.0-rc6 now, with configuration from the "original" Debian kernel, make oldconfig and all choices to default.

Quoted 2 lines

Also, try the latest alsa-lib from git tree, too. I thought David provides some packages built from the latest repo?

I've found this repository by David:

https://launchpad.net/~diwic/+archive/dkms

however it seems to be deprecated and points to this:

https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-dailyvvv

which however only contains "dkms-hda" packages. I'm not sure what those packages contain, or rather whether they contain the latest alsa and utils. It seems that they "only" contain an out of tree hda build, but I'm not sure.

I'll try to compile latest alsa "the Debian way" and see if that changes anything.

Quoted 9 lines
Quoted 3 lines
Quoted 1 line

Which codec and HD-audio controller chips?

Wrt codec - I don't know. Before suspending I am not playing any sound.

Well, I meant the audio codec chip, not the codec format :) But in the text below, you showed a conexant codec.

Also, it's important to know what h/w vendor and model are. I guess it's a Lenovo machine?

It's not Conexant. It's:

Quoted 8 lines

100.0% Device Audio codec hwC0D0:
IDT
100.0% Device Audio codec hwC0D3:
Intel

Note that with Debian's 3.2.0-4-amd64 kernel only the IDT codec would show up
on the top of powertop's list. Now there's the Intel codec as well.

OK, I've read a different line for other people's machine, then.

(BTW, you can just check /proc/asound/card0/codec#0 and codec#3 files
for more detailed information about the codec. powertop gives only digests.)

Quoted 39 lines
Quoted 2 lines
Quoted 2 lines

And the
system (say the desktop system or the bell in a terminal) isn't

producing

Quoted 6 lines
Quoted 1 line

any sound either.

OK.

Quoted 2 lines

Powertop says "Audio codec hwC0D0: IDT". Other People in the launchpad bugtracker seem to be reporting either "hwC0D0: IDT", "hwC0D0:

Conexant"

Quoted 29 lines
Quoted 14 lines

or
"hwC0D1: Conexant".

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

Here's the chip:

Audio:
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)

Quoted 2 lines

Please elaborate a bit more instead of a bug track URL. This will save lots of time for other people.

Quoted 6 lines

Powertop v2.0 shows:
in the Overview tab:

                Usage       Events/s    Category       Description
            100.0%                      Device         Audio codec
            hwC0D0:

IDT

The usage in powertop doesn't mean what actually consuming the power in 100%. It's a completely different statistics from the CPU usage.

It shows that the sound driver hasn't gone into the power-saving mode, a sort of partial suspend of the device. It can happen by various reasons: e.g. when your system doesn't set up the power_save option properly, or your mixer setup blocks it.

Quoted 8 lines
Quoted 5 lines

First off, check the value in /sys/module/snd_hda_intel/parameters/power_save. If it shows 0, it means the power-saving feature is turned off. If it's a positive value, it means the power-saving may be turned on after the specified seconds after closing all usages of sound devices.

Upon boot the value is 0. I can set it to 1 and it stays 1 while running, however if I suspend to ram and resume, the value gets reset to 0 again.

This is the system setup issue. It has nothing to do with the driver itself.

So, what is the *real* problem with it? Did you measure any real power consumption with it?

If the usages is turned off after playing something, it is the feature in your kernel version. As mentioned, power_save option itself didn't trigger the power-save mode but it's activated only after closing a device. This was improved with 3.7, so check with the 3.7 kernel.

thanks,

Takashi

#7 lore raw
Quoted 30 lines · Takashi Iwai
Quoted 29 lines · Tomas Pospisek
Quoted 10 lines · Takashi Iwai
Quoted 8 lines · Tomas Pospisek
Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Tomas Pospisek

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

What do you mean "wakeup"?

Waking up from suspend to RAM.

And does the same issue occur on hibernation, too? Basically both S2RAM and S2DISK use the same suspend/resume path regarding the sound driver, so the behavior should be consistent in both cases.

s2disk doesn't work here / isn't configured properly so I can't tell ad hoc.

Quoted 5 lines
Quoted 4 lines
Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:
http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64

Quoted 6 lines
Quoted 6 lines
Quoted 4 lines

OK, could you check the latest Linus tree (at least 3.7-rc5) whether the problem is still present? If it is, please keep using it for the further testing instead of 3.2.0. 3.2.0 is way too old to debug primarily.

I'm running 3.7.0-rc6 now, with configuration from the "original"

Debian

Quoted 4 lines
Quoted 4 lines

kernel, make oldconfig and all choices to default.

Quoted 2 lines

Also, try the latest alsa-lib from git tree, too. I thought David provides some packages built from the latest repo?

Since changing the kernel from 3.2.0-4-amd64 to upsteam 3.7.0-rc6 fixed the excessive heat production, I'm concluding that the problem is not with alsa-lib.

Quoted 11 lines
Quoted 11 lines
Quoted 10 lines
Quoted 4 lines
Quoted 1 line

Which codec and HD-audio controller chips?

Wrt codec - I don't know. Before suspending I am not playing any sound.

Well, I meant the audio codec chip, not the codec format :) But in the text below, you showed a conexant codec.

Also, it's important to know what h/w vendor and model are. I guess it's a Lenovo machine?

Quoted 7 lines
Quoted 7 lines

It's not Conexant. It's:

         100.0%           Device         Audio codec  hwC0D0: IDT
         100.0%           Device         Audio codec  hwC0D3: Intel

Note that with Debian's 3.2.0-4-amd64 kernel only the IDT codec would show up on the top of powertop's list. Now there's the Intel codec as

well.

Quoted 6 lines

OK, I've read a different line for other people's machine, then.

(BTW, you can just check /proc/asound/card0/codec#0 and codec#3 files
for more detailed information about the codec. powertop gives only digests.)

Thanks, it's giving me much more information that I can make sense of :-)

Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines

And the
system (say the desktop system or the bell in a terminal) isn't

producing

Quoted 5 lines
Quoted 1 line

any sound either.

OK.

Quoted 1 line

Powertop says "Audio codec hwC0D0: IDT". Other People in the

launchpad

Quoted 7 lines
Quoted 7 lines
Quoted 1 line
Quoted 1 line

bugtracker seem to be reporting either "hwC0D0: IDT", "hwC0D0:

Conexant"

Quoted 5 lines
Quoted 5 lines

or
"hwC0D1: Conexant".

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

Here's the chip:

Audio:
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)

Quoted 1 line

Please elaborate a bit more instead of a bug track URL. This

will

Quoted 15 lines
Quoted 15 lines
Quoted 15 lines
Quoted 6 lines
Quoted 1 line

save lots of time for other people.

Powertop v2.0 shows:
in the Overview tab:

       Usage       Events/s    Category    Description
   100.0%                      Device      Audio codec  hwC0D0: IDT

The usage in powertop doesn't mean what actually consuming the power in 100%. It's a completely different statistics from the CPU usage.

It shows that the sound driver hasn't gone into the power-saving mode, a sort of partial suspend of the device. It can happen by various reasons: e.g. when your system doesn't set up the power_save option properly, or your mixer setup blocks it.

Quoted 7 lines
Quoted 7 lines
Quoted 5 lines

First off, check the value in /sys/module/snd_hda_intel/parameters/power_save. If it shows 0, it means the power-saving feature is turned off. If it's a positive value, it means the power-saving may be turned on after the specified seconds after closing all usages of sound devices.

Upon boot the value is 0. I can set it to 1 and it stays 1 while

running,

Quoted 1 line
Quoted 1 line

however if I suspend to ram and resume, the value gets reset to 0

again.

Quoted 6 lines

This is the system setup issue. It has nothing to do with the driver itself.

So, what is the *real* problem with it? Did you measure any real power consumption with it?

I don't know what is causing the excessive heat. I just know that when the laptop wakes from suspend to ram under the 3.2.0-4-amd64 kernel it starts blowing hot air immediately. I start powertop and see
"100% Audio codec hwC0D0: IDT" on top of the "Overview" list. I start alsamixer, press F5, I hear a slight "click" (as in speakers were dis/connected), "hwC0D0: IDT" drops to 0% and after a minute or so the laptop stops ventilating.

The trail that lead me to this conclusion
So my conclusion was that probably the production of heat and the audio system were connected. My conclusion might very well be wrong.

The trail that lead me to this conclusion passed through this comment here:

https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631/comments/13

That person had to "mess with alsamixer settings" specifically with "Mic feedthrough to Main".

It's noteworthy that for most people:

https://bugs.launchpad.net/ubuntu/+source/powertop/+bug/536631
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

setting triggering the relevant system config parameters as in:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560/comments/37

that is setting /sys/module/snd_hda_intel/parameters/power_save{_controller} resolved the problem. Not for me however.

Quoted 4 lines

If the usages is turned off after playing something, it is the feature in your kernel version. As mentioned, power_save option itself didn't trigger the power-save mode but it's activated only after closing a device. This was improved with 3.7, so check with the 3.7 kernel.

As I wrote, I _am_ using 3.7-rc6, and if I:

echo 1 > /sys/module/snd_hda_intel/parameters/power_save

it will stay 1, but after wake from suspend to RAM it will be 0 again. *t

#8 lore raw
In reply to Tomas Pospisek
Quoted 28 lines · Tomas Pospisek
Quoted 10 lines · Takashi Iwai
Quoted 8 lines · Tomas Pospisek
Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Tomas Pospisek

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

What do you mean "wakeup"?

Waking up from suspend to RAM.

And does the same issue occur on hibernation, too? Basically both S2RAM and S2DISK use the same suspend/resume path regarding the sound driver, so the behavior should be consistent in both cases.

s2disk doesn't work here / isn't configured properly so I can't tell ad hoc.

Quoted 5 lines
Quoted 4 lines
Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:

   http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64
Quoted 7 lines
Quoted 4 lines

OK, could you check the latest Linus tree (at least 3.7-rc5) whether the problem is still present? If it is, please keep using it for the further testing instead of 3.2.0. 3.2.0 is way too old to debug primarily.

I'm running 3.7.0-rc6 now, with configuration from the "original" Debian kernel, make oldconfig and all choices to default.

The Ubuntu kernel team does mainline builds - https://wiki.ubuntu.com/Kernel/MainlineBuilds - which provide the latest upstream kernels.

Quoted 11 lines
Quoted 2 lines

Also, try the latest alsa-lib from git tree, too. I thought David provides some packages built from the latest repo?

I've found this repository by David:

https://launchpad.net/~diwic/+archive/dkms

however it seems to be deprecated and points to this:

https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-dailyvvv

Quoted 7 lines

which however only contains "dkms-hda" packages. I'm not sure what those packages contain, or rather whether they contain the latest alsa and utils. It seems that they "only" contain an out of tree hda build, but I'm not sure.

I'll try to compile latest alsa "the Debian way" and see if that changes anything.

The thing I currently compile and maintain are DKMS packages for the HDA driver. We're never daily built alsa-lib, and the full sound tree builds have been discontinued since almost everyone used the DKMS packages (or the full mainline kernel). See https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS for how to install them.

I haven't followed this thread in total, and I hadn't seen the bug report before it was reported here, but I find it a little strange that a headphone amp, even at full power, would give out so much heat that your fan would spin up (I mean, this doesn't happen when you normally listen to music through headphones, right?). I could be wrong, but AFAIK, a codec chip just doesn't cause that much heat in /any/ situation. So it's probably something else?

It does put another question - from where does powertop get its values, and do we have to do anything on our side to make sure / aid them being correct?

Signature · 2 lines
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
#9 lore raw

At Tue, 20 Nov 2012 09:07:21 +0100,

Quoted 4 lines · David Henningsson

It does put another question - from where does powertop get its values, and do we have to do anything on our side to make sure / aid them being correct?

powertop checks /sys/class/sound/hwC*D*/power_{off|on}_acct files. They contain the time (in ms) how long the codec is in the power-save mode.

Takashi

#10 lore raw
Quoted 10 lines · Takashi Iwai

At Tue, 20 Nov 2012 09:07:21 +0100,

Quoted 4 lines · David Henningsson

It does put another question - from where does powertop get its values, and do we have to do anything on our side to make sure / aid them being correct?

powertop checks /sys/class/sound/hwC*D*/power_{off|on}_acct files. They contain the time (in ms) how long the codec is in the power-save mode.

Thanks. But I have also recently seen a computer where powertop showed a Watt number, essentially saying that the codec consumed 1.4 Watts or so (I don't remember the exact number). Have you seen that too?

Signature · 2 lines
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
#11 lore raw

At Tue, 20 Nov 2012 09:56:19 +0100,

Quoted 9 lines · David Henningsson
Quoted 7 lines · Takashi Iwai

At Tue, 20 Nov 2012 09:07:21 +0100,

Quoted 4 lines · David Henningsson

It does put another question - from where does powertop get its values, and do we have to do anything on our side to make sure / aid them being correct?

Quoted 7 lines
Quoted 3 lines

powertop checks /sys/class/sound/hwC*D*/power_{off|on}_acct files. They contain the time (in ms) how long the codec is in the power-save mode.

Thanks. But I have also recently seen a computer where powertop showed a Watt number, essentially saying that the codec consumed 1.4 Watts or so (I don't remember the exact number). Have you seen that too?

When 1.4W is constantly consumed even without PCM, it's a bit too high. But with PCM playback, about 1W usage can be measured normally, I guess.

Takashi

#12 lore raw
Quoted 18 lines · Takashi Iwai

At Tue, 20 Nov 2012 09:56:19 +0100,

Quoted 16 lines · David Henningsson
Quoted 9 lines · Takashi Iwai

At Tue, 20 Nov 2012 09:07:21 +0100,

Quoted 6 lines · David Henningsson

It does put another question - from where does powertop get its values,
and do we have to do anything on our side to make sure / aid them being
correct?

Quoted 3 lines

powertop checks /sys/class/sound/hwC*D*/power_{off|on}_acct files. They contain the time (in ms) how long the codec is in the power-save mode.

Thanks. But I have also recently seen a computer where powertop showed

a

Quoted 7 lines
Quoted 3 lines

Watt number, essentially saying that the codec consumed 1.4 Watts or so

(I don't remember the exact number). Have you seen that too?

When 1.4W is constantly consumed even without PCM, it's a bit too high. But with PCM playback, about 1W usage can be measured normally, I guess.

man powertop says:

--calibrate runs powertop in calibration mode. When running on battery,
powertop can track power consumption as well as system activity. When there are enough measurements, powertop can start to report power estimates. One can get more accurate estimates by using this option to enable a calibration cycle. This will cycle through various display levesl and USB device activities and workloads.

So that's what powertop does I think: it estimates. *t

#13 lore raw

At Wed, 21 Nov 2012 15:15:09 +0100,

Quoted 39 lines · Tomas Pospisek
Quoted 18 lines · Takashi Iwai

At Tue, 20 Nov 2012 09:56:19 +0100,

Quoted 16 lines · David Henningsson
Quoted 9 lines · Takashi Iwai

At Tue, 20 Nov 2012 09:07:21 +0100,

Quoted 6 lines · David Henningsson

It does put another question - from where does powertop get its values,
and do we have to do anything on our side to make sure / aid them being
correct?

Quoted 3 lines

powertop checks /sys/class/sound/hwC*D*/power_{off|on}_acct files. They contain the time (in ms) how long the codec is in the power-save mode.

Thanks. But I have also recently seen a computer where powertop showed

a

Quoted 7 lines
Quoted 3 lines

Watt number, essentially saying that the codec consumed 1.4 Watts or so

(I don't remember the exact number). Have you seen that too?

When 1.4W is constantly consumed even without PCM, it's a bit too high. But with PCM playback, about 1W usage can be measured normally, I guess.

man powertop says:

--calibrate runs powertop in calibration mode. When running on battery,
powertop can track power consumption as well as system activity. When there are enough measurements, powertop can start to report power estimates. One can get more accurate estimates by using this option to enable a calibration cycle. This will cycle through various display levesl and USB device activities and workloads.

Quoted 1 line

So that's what powertop does I think: it estimates.

But 100% things from hwC0D0 has nothing to do with the real power usage. It's just the time of HD-audio power-saving mode on and off.

Takashi

#14 lore raw
In reply to David Henningsson
Quoted 29 lines · David Henningsson
Quoted 28 lines · Tomas Pospisek
Quoted 10 lines · Takashi Iwai
Quoted 8 lines · Tomas Pospisek
Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Tomas Pospisek

The kernel of the upcoming Debian release and some recent kernels of Ubuntu seem to be suffering from HDA running at full force upon wakeup and producing a lot of heat (keeping the fan spinning loudly).

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

What do you mean "wakeup"?

Waking up from suspend to RAM.

And does the same issue occur on hibernation, too? Basically both S2RAM and S2DISK use the same suspend/resume path regarding the sound driver, so the behavior should be consistent in both cases.

s2disk doesn't work here / isn't configured properly so I can't tell ad hoc.

Quoted 5 lines
Quoted 4 lines
Quoted 1 line

Which kernel are you using?

3.2.0-4-amd64 from Debian wheezy:

   http://packages.debian.org/wheezy/linux-image-3.2.0-4-amd64
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines

OK, could you check the latest Linus tree (at least 3.7-rc5) whether the problem is still present? If it is, please keep using it for the further testing instead of 3.2.0. 3.2.0 is way too old to debug primarily.

I'm running 3.7.0-rc6 now, with configuration from the "original"

Debian

Quoted 24 lines
Quoted 1 line

kernel, make oldconfig and all choices to default.

The Ubuntu kernel team does mainline builds -
https://wiki.ubuntu.com/Kernel/MainlineBuilds - which provide the latest

upstream kernels.

Quoted 17 lines
Quoted 2 lines

Also, try the latest alsa-lib from git tree, too. I thought David provides some packages built from the latest repo?

I've found this repository by David:

https://launchpad.net/~diwic/+archive/dkms

however it seems to be deprecated and points to this:

https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-dailyvvv

which however only contains "dkms-hda" packages. I'm not sure what those packages contain, or rather whether they contain the latest alsa and utils. It seems that they "only" contain an out of tree hda build, but I'm not sure.

I'll try to compile latest alsa "the Debian way" and see if that

changes

Quoted 9 lines
Quoted 1 line

anything.

The thing I currently compile and maintain are DKMS packages for the HDA

driver. We're never daily built alsa-lib, and the full sound tree builds

have been discontinued since almost everyone used the DKMS packages (or the full mainline kernel). See
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS for how to install

them.

Thanks for both of your pointers!

Quoted 5 lines

I haven't followed this thread in total, and I hadn't seen the bug report before it was reported here, but I find it a little strange that a headphone amp, even at full power, would give out so much heat that your fan would spin up (I mean, this doesn't happen when you normally listen to music through headphones, right?).

Now that I'm running the 3.7.0-rc6 kernel my laptop is staying rather cool and the fan is mostly off.

However with Debian's 3.2.0-4-amd64 kernel it's the contrary, the latop is blowin hot air. The laptop has got a discrete Radeon card, but that card is off and is not showing in powertop. And in powertop's CPU view, the "package" is being shown as being <4% in "Turbo" mode. With 3.7.0-rc6 it's never in "Turbo" mode.

Also, with 3.7.0-rc6 after wake from suspend to RAM the Codecs show first on the top in powertops "Overview" but after a few minutes drop out of sight. They are still shown at 100% in powertop however they are shown to use 0mW.

So back to your question "this doesn't happen when you normally listen to music through headphones, right?": what I'm doing on the laptop under the 3.2.0-4-amd64 kernel doesn't influence much the output of hot air. I notice however that when I wake up, the laptop starts blowing hot air immediately. And it doesn't stop until I go into alsamixer and press F5. I hear a slight click (as in speakers getting dis/connected) and then "Audio codec hwC0D0: IDT" drops to 0% and the laptop stops blowing.

If you go to the original Ubuntu bugreport:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/877560

you'll notice that many users are reporting very similar problems there.

Quoted 3 lines

I could be wrong, but
AFAIK, a codec chip just doesn't cause that much heat in /any/ situation. So it's probably something else?

I don't understand why you are saying that it would be the headphones amplyfier. Is "IDT" the amplifier for the headphones only? I.e. not for the laptop's standard speakers?

So now that with the 3.7.0-rc6 kernel my laptop runs cool again, I could stop at this point and go on with my own private ways. However it'd be nice if it'd be possible to find out what exactly was causing the problem in Debian's 3.2.0-4-amd64 kernel. It will be Debian's stable kernel for the next 3 years and some of the users will be swearing a lot due to the fan noise and the short battery life. Same for Ubuntu Precise's kernel it seems.

Thanks,
*t