selinux(8): note on conflicting configurations
PATCH 1/1 selinux(8): note on conflicting configurations
setting SELINUX=disabled while having selinux=1
results in a non-booting system. Document this
here in a note
--- libselinux/man/man8/selinux.8 | 9 +++++++++ 1 file changed, 9 insertions(+)
libselinux/man/man8/selinux.8 +9 -0
@@ -50,6 +50,15 @@ regardless of what is set in the .I /etc/selinux/config file. +.B NOTE: +When setting a conflicting configuration like +.B SELINUX=disabled +in +.I /etc/selinux/config +while having +.B selinux=1 +on the kernel boot options will result in a non-bootable system. + The .I /etc/selinux/config configuration file also controls what policy
--
2.55.0
Quoted 6 lines · Johannes Segitz
setting SELINUX=disabled while having selinux=1
results in a non-booting system. Document this
here in a noteSigned-off-by Johannes Segitz <[email protected]>
The patch is fine but wondering if we want to change the libselinux behavior in this situation.
Quoted 26 lines
--- libselinux/man/man8/selinux.8 | 9 +++++++++ 1 file changed, 9 insertions(+)libselinux/man/man8/selinux.8 +9
-1@@ -50,6 +50,15 @@ regardless of what is set in the .I /etc/selinux/config file. +.B NOTE: +When setting a conflicting configuration like +.B SELINUX=disabled +in +.I /etc/selinux/config +while having +.B selinux=1 +on the kernel boot options will result in a non-bootable system. + The .I /etc/selinux/config configuration file also controls what policy --2.55.0
Quoted 30 lines · Johannes Segitz
setting SELINUX=disabled while having selinux=1
results in a non-booting system. Document this
here in a noteSigned-off-by Johannes Segitz <[email protected]>--- libselinux/man/man8/selinux.8 | 9 +++++++++ 1 file changed, 9 insertions(+)libselinux/man/man8/selinux.8 +9
-1@@ -50,6 +50,15 @@ regardless of what is set in the .I /etc/selinux/config file. +.B NOTE: +When setting a conflicting configuration like +.B SELINUX=disabled +in +.I /etc/selinux/config +while having +.B selinux=1 +on the kernel boot options will result in a non-bootable system. + The .I /etc/selinux/config configuration file also controls what policy --
Quoted 1 line
2.55.0
It seems to work for me on CentOS Stream 10:
[root@default-0]# sestatus SELinux status: disabled
[root@default-0]# cat /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/boot/vmlinuz-6.12.0-250.el10.x86_64 root=UUID=45db8c52-819d-4199-bca1-3f50a95d7fc5 ro console=ttyS0,115200n8 no_timer_check crashkernel=2G-64G:256M,64G-:512M selinux=1
[root@default-0]# cat /etc/selinux/config
# This file controls the state of SELinux on the system. # SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - No SELinux policy is loaded.
# See also:
# https://docs.fedoraproject.org/en-US/quick-docs/getting-started-with-selinux/#getting-started-with-selinux-selinux-states-and-modes
#
# NOTE: In earlier Fedora kernel builds, SELINUX=disabled would also
# fully disable SELinux during boot. If you need a system with SELinux # fully disabled instead of SELinux running with no policy loaded, you # need to pass selinux=0 to the kernel command line. You can use grubby # to persistently set the bootloader to boot with selinux=0: # # grubby --update-kernel ALL --args selinux=0 # # To revert back to SELinux enabled: # # grubby --update-kernel ALL --remove-args selinux # SELINUX=disabled # SELINUXTYPE= can take one of these three values: # targeted - Targeted processes are protected, # mls - Multi Level Security protection. SELINUXTYPE=targeted
[root@default-0]# rpm -q libselinux libselinux-3.11-1.el10.x86_64
Quoted 19 lines · Petr Lautrbach
Quoted 17 lines · Johannes Segitz
setting SELINUX=disabled while having selinux=1
results in a non-booting system. Document this
here in a noteSigned-off-by Johannes Segitz <[email protected]>--- libselinux/man/man8/selinux.8 | 9 +++++++++ 1 file changed, 9 insertions(+)libselinux/man/man8/selinux.8 +0
-0@@ -50,6 +50,15 @@ regardless of what is set in the .I /etc/selinux/config file.
Quoted 16 lines
Quoted 13 lines
libselinux/man/man8/selinux.8 +9
-1+.B NOTE: +When setting a conflicting configuration like +.B SELINUX=disabled +in +.I /etc/selinux/config +while having +.B selinux=1 +on the kernel boot options will result in a non-bootable system. + The .I /etc/selinux/config configuration file also controls what policy --Quoted 1 line
2.55.0
It seems to work for me on CentOS Stream 10:
Interesting. We got this reported on an older SLES and carried the patch since then. I just reproduced on a current system and there it also doesn't happen, so please disregard this patch
Johannes
Signature · 4 lines
GPG Key EE16 6BCE AD56 E034 BFB3 3ADD 7BF7 29D5 E7C8 1FA0 Subkey fingerprint: 250F 43F5 F7CE 6F1E 9C59 4F95 BC27 DD9D 2CC4 FD66 SUSE Software Solutions Germany GmbH, Frankenstr. 146, 90461 Nürnberg, Germany www.suse.com, Geschäftsführer: Jochen Jaser, Andrew McDonald, Abhinav Puri, (HRB 36809, AG Nürnberg)